Showing all 17 resultsSorted by popularity
-
$8.99 Original price was: $8.99.$7.99Current price is: $7.99.
Features
- BITPPTX25 T25 driver bit and mandrel designed exclusively for Project Pro
- T25 6-lobe drive provides reliable installation performance
- Specially made for a secure fit with Simpson Strong-Tie fasteners
Strong-Tie Resources:
-
$457.99 Original price was: $457.99.$439.67Current price is: $439.67.
Features
- access tight corners with the DCF620CM2’s slim nose /removable shoe
- lock-on feature enables fast installation of collated drywall screws
- Full 360° rotation allows users to choose best positioning
- Detent marks allow for easy and clear setup for varying screw lengths
- fine-depth adjustment allows for consistent screw installation at varying depths
DCF620CM2 Instruction Manual
-
-
$29.99
Features
- DWHT65103 features black chrome plating
- MAX FITtips engineered to provide better contact with fasteners
- High-durability S2 steel bar
-
Features
- Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- Brushless motor delivers 3,600 Max RPM and 1,600 in.lbs. of Max Torque
- 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
- Additional one-touch 4-speed power selector button under the chuck for added convenience
- Assist Mode (A-mode) feature helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins
-
$98.99
Features:
- Precision Point Technology for accurate nail placement
- Drives 18 Ga. brad nails from 5/8 in. to 2-1/8 in.
- Long-life, maintenance-free motor helps avoid staining work surface
- Tool-free depth adjustment and jam release
- Rear exhaust and adjustable belt hook
-
$5.99
Features:
- Impact Tough design for high-torque use with impact drivers and wrenches
- Deep well reaches fasteners in hard-to-access spaces
- 1/4 in. hex interface fits hex impact drivers
- Hardened-core manufacturing increases strength and reduces breakage
- 3/8 in. drive end with 1/2 in. shank
-
$5.72
Features:
- Impact Tough deep well socket for hard-to-reach hex fasteners
- Engineered for high torque use with impact drivers and wrenches
- 1/4 in. hex interface; 1/2 in. shank
- Hardened-core manufacturing for increased strength and reduced breakage
-
$26.99
Features
- DWHT65201 features a magnetic tip
- precision-crafted, sand-blasted tip
- comfortable grip and high torque with ergonomically designed performance handle
- Tip ID on handle
-
$11.99
Features
- DWHT65200 features a magnetic tip
- Sand-blasted tips fit tightly within fasteners
- bi-material handle
- Tip ID on handles
-
$23.99
Features
- DWHT65202 offers a magnetic tip
- Sand-blasted tips fit tightly within fasteners
- bi-material handle
- Tip ID on handles
-
$154.99
Features
- 72 teeth providing 5 degree arc swing
- DWMT19232 has a full Polish Chrome
- Stamped hashmark pattern on wrench handle provides added grip points
- Sizes stamped twice on both sides of wrench handle for easier size identification
- 15 degree offset open end allows an increased range of arc swing in tight spaces
-
$202.99
Features
- Heat treated CR-440 steel
- Direct Torque Technology
- High visibility laser etched markings
- Black oxide coating
- O-ring and retaining pin compatible
-
Features
- Greater speed than DW272 corded screwgun with up to 4,400 RPM
- DEWALT built brushless motor for efficient performance and runtime
- Nosecone locks on securely and is easily removed while maintaining consistent screw depth
- Compatible with the DCF6201 Collated Magazine Attachment
- Illuminate dark work areas and increase visibility with the LED
-
$400.99
Features
- Drives a range of 18 gauge brad nails from 5/8″ to 2″; magazine capacity up to 100 nails
- Drives up to 1,660 finish nails using a 5.0Ah 18V LXT® Battery (battery not included)*
- 2-mode selector switch for control of nailing operation
- “Tool-less” depth adjustment for precise flush and countersink finish
- Anti-dry fire mechanism engineered to prevent driving blanks and damage to work surface
-
$387.99
Features
- DEWALT built brushless motor and XR Li-ion batteries deliver more run time and capacity over standard units
- DCF887M2 features a 3-speed settings for optimized application versatility
- Precision drive in speed 1 for precision applications and added control
- 3 LED lights with 20 second delay after trigger release, provide visibility without shadows
- 1-handed loading 1/4-in hex chuck with easy grip sleeve, accepts 1-in bit tips
- Compact and lightweight design to fit into tight areas (6 mm shorter than the previous DCF886)
- Includes 1 DCF887 20-volt MAX XR 1/4-in 3-speed impact driver, two 4.0-Ah 20-volt MAX XR batteries, 1 fast charger, 1 belt hook
-
$142.70
The TA116/21-13 from MAX is a 21 gauge safety equipped pneumatic fine wire stapler to bring that creative finish on your decorative projects. With is ultra-lightweight handling at 2.2 lbs, you?ll find this tool is extremely easy to use in your hands when you?re stapling interior trim or furniture and cabinet assembly. The TA116/21-13 is…
