corded power tools engineered to deliver consistent, high-quality results. Ideal for a wide range of uses requiring strength and consistency.
Showing all 11 resultsSorted by popularity
-
HR2475 1″ SDS‑PLUS Rotary Hammer (D‑Handle)
Features
- Powerful 7 amp motor
- Torque limiting clutch engineered to prevent gear damage
- Variable speed trigger
- 40 bit angle settings
- One-touch sliding chuck for quick bit changes
-
5007MGA 7‑1/4″ Magnesium Circular Saw, with Electric Brake
$256.99Features
- Electric brake for maximum productivity
- Magnesium components create a lightweight saw (10.6 lbs.) that’s well-balanced and job site tough
- Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and job site durability
- Large cutting capacity (2-1/2″ at 90°) and bevel capacity (0°-56°) with positive stops at 22.5°, 45°, and 56°
- Large rubberized levers for quick and easy one-handed adjustments
-
Bosch RH745 SDS-max 1-3/4 in. Rotary Hammer, 13.5A, 8.2 Ft.-Lbs. EPTA, 120V
$769.00Features:
- 8.2 ft-lbs EPTA impact energy for top drilling and chiseling performance
- SDS-max bit system with tool-free bit changes and automatic bit-locking
- Vario-Lock rotates chisel into 12 positions for optimal working angle
- Variable speed dial for controlled drilling and chipping
- Service Minder light indicates when maintenance is required
- Soft-grip rear handle and 360° auxiliary handle for comfort
-
Bosch RH850VC SDS-max 1-7/8 in. Combination Rotary Hammer, 14.5A, 9.3 ft-lbs, 120V
$929.00Features:
- Powerful 14.5-amp motor delivers 9.3 ft.-lbs. of impact energy
- Vibration Control for maximum user comfort on all-day jobs
- Dual-mode selector switches between rotary hammer and hammer-only
- Constant Response circuitry for soft-start, constant speed under load, and overload protection
- Turbo Power provides a 20% power boost in hammer-only mode
- SDS-max bit system enables tool-free bit changes and strong impact energy transfer
-
Bosch RH328VC SDS-plus 1-1/8 in Rotary Hammer, 8.0-Amp, 2.4 Ft.-Lbs Impact Energy, 120V
$299.00Features:
- Powerful 8.0-amp motor delivers 2.4 Ft.-Lbs. of impact energy
- Vibration Control in mechanism and grip for comfort during extended use
- Three modes: rotary hammer, rotation-only, and hammer-only
- Keyless SDS-plus shank accepts bits up to 1-1/8 in. diameter
- Integral clutch reduces torque reaction in bind-up
- Variable-speed trigger with reverse for accurate starts and removing fasteners
- Compact and lightweight at 12.5 in. long and 7.7 lb
-
Bosch GWS8-45 4-1/2 in. Angle Grinder, 7.5 Amp, 11,000 RPM, 5/8-11 Spindle, 120V
$69.00Features:
- Powerful 7.5 Amp motor delivers 11,000 no-load RPM
- Slim-grip design for comfortable extended use
- Durable carbon brushes for extended tool life
- Two-position side handle for better control
- Directed air flow helps divert dust from vital components
- Burst-protection guard with quick adjustment
- Service Minder brushes indicate when maintenance is required
- Large spindle lock for easy disc changes
-
Bosch 11255VSR SDS-plus Bulldog Xtreme 1 in. Rotary Hammer, 8.0 Amp, 2.0 Ft.-Lbs., 0-1,300 RPM, 0-5,800 BPM
$219.00Features:
- 8.0 Amp motor delivers 2.0 Ft.-Lbs. of impact energy
- 3 operation modes: rotary hammer, rotation only, hammer only
- Vario-Lock rotates and locks chisel in 36 positions
- Integral clutch helps protect against bind-up
- Variable-speed trigger with reverse for accurate starts
- D-handle design for comfortable overhead/downward drilling
- SDS-plus bit system enables tool-free bit changes
-
DS4012 1/2″ Spade Handle Drill
$292.99Features
- Variable speed (0 – 600 RPM) for mixing and drilling in a wide variety of materials
- Forward and reverse lever for operator convenience
- Well-balanced design at only 6.2 lbs. for reduced operator fatigue
- D-handle rotates 360° with 24 detent stops for multi-position operation
- Rubberized grip for increased operator comfort
-
5007MG Magnesium Circular Saw
$195.00Features
- Magnesium components create a lightweight saw (10.6 lbs.) that is well balanced and jobsite tough
- Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and job site durability
- Large cutting capacity (2-1/2″ at 90°) and bevel capacity (0°-56°) with positive stops at 22.5°, 45°, and 56°
- Large rubberized levers for quick and easy one-handed adjustments
- Ergonomically designed rubberized handle for better fit and added comfort
-
PC5001C 5″ Concrete Planer
$1,071.99Features
- Powerful 10.0 AMP motor delivers more output and 10,500 RPM
- Constant Speed Control automatically applies additional power to the motor to maintain speed under load
- Soft start suppresses start-up reaction for more precision and longer tool life
- Electronic current limiter helps protect the motor from overload
- Anti-restart prevents accidental start up after power loss
- Large two-finger trigger switch with lock-on for continuous operation
-
BN Products BNCE-20 #6 [20mm] Cutting Edge Saw
$345.75Features
- The BNCE-20 rotary rebar cutting saw is designed to cleanly cut the material FLUSH with the surface, ideal for cutting tails off of block wall construction
- Tool features a unique flush-cutting blade guard that greatly reduces blade exposure
- Also has a double insulated power harness and is ETL/UL certified and listed
- Tool is designed to emit minimal cutting sparks
- Cut material is virtually burr-free and cool to the touch
- Proprietary cutting blades are inexpensive and an extra blade comes with every tool
