construction tool accessory engineered to deliver consistent, high-quality results. Ideal for a wide range of uses requiring strength and consistency.
Showing all 26 resultsSorted by popularity
-
Max JE400 RB Tool Extension Arm – For Max USA hand held Rebar Tiers Only – Allows for standing operation to reduce back strain
$218.72- JE400 Extension Arm is designed for adjustable height tying
- Compatible with RB441T, RB443T, RB611T, RB398S, RB518, RB218, RB655
-
Bosch 18SG-7 7 in. Angle Grinder Concrete Surfacing Attachment, Dust Collection Guard, Tool-Free, Replaceable Brush Ring
$129.00Features:
- Dust collection reduces cleanup and improves air quality
- Removable nose piece for quick flush surfacing
- Replaceable brush ring for low-cost maintenance
- Tool-free attachment to compatible Bosch grinders
- Rugged construction for jobsite durability
-
GG311 Kraft Aluminum Tie Wire Reel
$47.60Features:
- Made of strong lightweight aluminum
- Will not chip, crack or break, easy turn handle, fits any standard belt
- Made in the USA
-
DeWalt DW5952 3x12x3/4 Scaling Chisel
$20.99Features
- DW5952 features a fully hardened steel body delivers increased life and durability
- For light chipping and chiseling of tile, mortar, glazing compounds, and other masonry products
- Scaling chisel (wide chisel) is used for removing tile, concrete splatter, and other excess material
- Manufactured by DEWALT
-
Diablo DMAMXCH1070 1 in. x 16 in. SDS-Max Twist Point Chisel
$18.99Features:
- Extreme durability and longer life in general demolition and clearing reinforcements
- Reflective energy collar generates new energy for maximum material removal
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Twist Point design resists jamming for faster chipping and material evacuation
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers
-
Diablo DMAMXCH1060 1 in. x 16 in. SDS-Max Flat Chisel
$10.83Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Maximum performance in cordless and corded SDS-Max rotary hammers
-
Northrock 25J2 2 in Concrete Consolidation Head
$310.15Features:
- 2 in diameter head for concrete vibration and consolidation
- Compatible with Northrock flexible shafts and power units
- Ideal for slabs, footings, and walls
- Durable construction for jobsite use
-
Werner X300003 Ladder Stability Strap Replacement Kit, Blue, 40 in Length x 1.8 in Width
Features:
- Replacement strap for Werner X300002 Ladder Stability Anchor Clamp and Strap
- Strap measures 40 in long by 1.8 in wide (1016 mm x 46 mm)
- Securely attaches to a ladder rung to help stabilize extension ladders
- Durable polyester webbing construction
- California Prop 65 free
-
Werner AC96 Universal Stabilizer, 47 in Span, 10 in Standoff, Aluminum, Silver
Features:
- Universal aluminum stabilizer for aluminum ladders of all duty ratings
- 47 in span with 10 in standoff for added reach and stability
- Mar-resistant rubber end caps protect work surfaces
- Paint can hook included; attaches in minutes with hardware
- Ideal for stabilizing M1 multi-ladders in scaffold or stairway positions
-
Werner AC63 Podium Gate Step Ladder Accessory, Yellow, 28 in Length
Features:
- Easily retrofitted to Werner Podium ladders
- Fully surrounds the user for 360? contact on the top platform
- Gate swings open and locks closed for safer ascent/descent
- Work facing any direction within ladder footprint
- Folds neatly for easy access and storage
-
Werner 97P Adjustable True Grip Stabilizer, Silver, 15.96 in L x 12.72 in W x 31.2 in H, 9.5 lb
Features:
- Span adjustment to 49, 57, or 65 inches
- Stand-off distance options: 12 inches or 29.5 inches
- Rectangular stabilizer spans double windows; protects surfaces
- Fits ladder rails up to 3 in x 1.188 in
- Mounts quickly; includes stabilizer, rubber pads, fleece bonnets, hardware, and instructions
-
Werner 91-2 Adjustable Pole Lash with Angle Brackets, Aluminum
Features:
- Adjustable pole lash fits all diameter poles
- Designed to wrap around a pole for secure stabilization
- Includes two angle brackets, mounting hardware, and instructions
- For use with select Werner fiberglass extension ladder series
-
Werner 74-2 Cable Hook Kit, Aluminum, 3.96 in L x 6 in W x 10 in H
Features:
- Easily folds within side rails for storage
- Mount above or below top rung
- Includes mounting hardware and instructions
-
Werner 71-4 Padded Fixed V-Rung Extension Accessory, Aluminum, 24 in x 4.8 in x 2.52 in
Features:
- Slip-resistant rubber grip on steel V-rung for wood, metal or concrete poles
- Pre-pierced holes in fiberglass top rails for easy installation
- Includes mounting hardware and instructions
-
Werner 71-1 Padded Fixed V-Rung Extension Accessory, Aluminum
Features:
- Slip-resistant rubber grip on steel V-rung for wood, metal or concrete poles
- Fits Werner fiberglass extension ladders with pre-pierced top rails
- Includes mounting hardware and instructions
-
Bosch HS1418 SDS-plus Bulldog Floor Scraper, 5 in x 11 in, 1-Piece
$56.99Features:
- 5 in. wide scraping blade with SDS-plus shank
- Designed for concrete and masonry demolition
- Proprietary heat-treated steel for durability
- Sharp edge for efficient material removal
- Compatible with rotary hammers and demolition hammers
-
Bosch HCFC2064 SDS-plus Bulldog Xtreme Carbide Rotary Hammer Drill Bit, 3/8 in x 10 in x 12 in, 1 Pack
$10.65Features:
- Four-cutter full-head carbide for up to 4X life in concrete with rebar
- Centered tip for accurate anchoring-hole placement
- Integrated wear mark indicates end of life
- Variable 4-2-2 flute design pulls dust away to reduce heat and improve efficiency
- SDS-plus shank fits SDS-plus rotary hammers
-
Bosch HCFC2061 SDS-plus Bulldog Xtreme Carbide Rotary Hammer Drill Bit, 3/8 in x 6 in, 4 in Working Length
$6.85Features:
- Four-cutter full-head carbide for up to 4X life in concrete with rebar
- Centering tip for precise anchoring-hole placement
- Integrated wear mark indicates end-of-life
- Variable (4-2-2) flute design pulls dust away to reduce heat and boost productivity
- Bosch-made carbide for durability
- SDS-plus shank for use with SDS-plus rotary hammers
-
DeWalt DW5809 Elite Series 5/8 in. x 16 in. x 21-1/2 in. 4-Cutter SDS Max Rotary Hammer Bit
$37.99Features
- Extreme durability
- 2X longer life
- Stands up to rebar strikes
- Wear mark indicator
- High Impact tip
-
DeWalt 08287-PWR Wire Brush for 7/8 In. Ansi Hole No. 6 Rebar
$22.99DeWalt 08287-PWR Wire Brush for 7/8 In. Ansi Hole No. 6 Rebar
-
-
Diablo DMAPL2320 SDS-Plus 2-Cutter 1/2x10x12 Rebar Demon Hammer Drill Bit
$12.89Features:
- Diablo SDS-Plus 2-Cutter
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Peak Point Tip design for aggressive starts that produce clean, fast holes
- Optimized brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized four-flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
-
Dewalt DW5440 1/2in x 16in x 18in Rock Carbide SDS Plus Hammer Bit
$15.83Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
-
23% OFF
Diablo DMADST0450 4-1/2 in. Diamond Segmented Turbo Cut-Off Discs for Masonry
Original price was: $31.99.$24.79Current price is: $24.79.Features
- Diamond segmented SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs.
- 60%taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardned materials
-
-
Diablo DMAPLCH2010 3/4 in. x 10 in. SDS-Plus Dual-Tooth Flat Chisel
$15.59Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition work, adjustment work, restoring joints and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Unique Dual-Tooth jam-free design creates multi-directional fractures for faster rate of material removal
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers
