ON SALE NOW

CYBER MONDAY DEALS ALL WEEK

CLICK HERE TO SHOP SAVINGS

SALE EXTENDED

CYBER MONDAY DEALS ALL WEEK

CLICK HERE

Construction Hardware

Construction Hardware crafted for durability and steady performance across tough jobs. Ideal for a wide range of uses requiring strength and consisten

  • BP 3/8-2BP 3/8-2

    Simpson Strong-Tie BP 3/8-2 BP 2 in. x 2 in. Bearing Plate with 3/8 in. Bolt Dia.

    $0.96

    Features:

    • Bolt diameter: 3/8 in.
    • Dimensions: 2 in. x 2 in.
    • BP 3/8-2 is made from 3/16 in. steel
    • Uncoated steel construction

     

    Add To CartDone
  • Simpson Strong-Tie MSTA24 MSTA 24-in. 18-Gauge Galvanized Medium Strap Tie product imageSimpson Strong-Tie MSTA24 MSTA 24-in. 18-Gauge Galvanized Medium Strap Tie product image

    Simpson Strong-Tie MSTA24 MSTA 24-in. 18-Gauge Galvanized Medium Strap Tie

    $2.13

    Features:

    • Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
    • Loads have been increased for wind and seismic forces
    • Floor-to-floor clear span application
    • For use on the edge of 2x members
    • Length: 24 in.
    Simpson Strong-tie MSTA24 Product Page
    Add To CartDone
  • PFM1411800

    [Pack of 100] DeWalt PFM1411020 1/4″ x 1-3/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    $29.95

    Features

    • PFM1411020 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 25] DeWalt 7426SD1-PWR 1/2 X 7 Power-Stud Plus SD1 Wedge Expansion Anchor

    $34.49

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • SD9112R100Simpson Strong-Tie SD9112R100 #9 x 1-1/2 In. Strong-Drive SD Connector Screw 100 count product image

    Simpson Strong-Tie SD9112R100 #9 x 1-1/2 In. Strong-Drive SD Connector Screw 100 count

    $11.99

    Features

    • SD9112R100 is approved for use in Simpson Strong-Tie connectors
    • Load-tested for reliability
    • Mechanically galvanized coating

    Technical and Installation Notes

    Add To CartDone
  • PFM1411800

    [Pack of 100] DeWalt PFM1411100 1/4″ x 3″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    $39.90

    Features

    • PFM1411100 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartDone
  • THDC25200H6SS[50 Pack] Simpson Strong-Tie THDC25200H6SS Titen HD 1/4 in. x 2 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THDC25200H6SS Titen HD 1/4 in. x 2 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $179.09

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDC25200H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • APA21APA21

    Simpson Strong-Tie APA21 [90° Angle]

    $1.99

    Features

    • Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
    • APA21 is stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
    Add To CartDone
  • SD10112R100SD10112R100

    Simpson Strong-Tie SD10112R100 #10 x 1-1/2 In. Strong-Drive SD Connector Screw

    $13.99

    Features

    • SD10112R100 is approved for use in Simpson Strong-Tie connectors
    • Load-tested for reliability
    • Mechanically galvanized coating

    Technical and Installation Notes

    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7422SD1-PWR 1/2 X 3-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    $34.49

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • SD10212R100-RSimpson Strong-Tie SD10212R100-R #10 x 2-1/2 In. Strong-Drive SD Connector Screw product image

    Simpson Strong-Tie SD10212R100-R #10 x 2-1/2 In. Strong-Drive SD Connector Screw

    $18.99

    Features

    • SD10212R100-R is approved for use in Simpson Strong-Tie connectors
    • Load-tested for reliability
    • Mechanically galvanized coating

    Technical and Installation Notes

    Add To CartDone
  • THDB62400H4SSTHDB62400H4SS

    [10 Pack] Simpson Strong-Tie THDB62400H4SS Titen HD 5/8 in. x 4 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $93.23

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDB62400H4SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • sdwc-scaled - Simpson Strong-Tie SDWC15600B-KT Strong-Drive SDWC TRUSS Screw .152 in. x 6 in. T30 Clear-Zinc Coat Orange 500-QtySimpson Strong-Tie SDWC15600B-KT Strong-Drive SDWC TRUSS Screw .152 in. x 6 in. T30 Clear-Zinc Coat Orange 500-Qty

    Simpson Strong-Tie SDWC15600B-KT Strong-Drive SDWC TRUSS Screw .152 in. x 6 in. T30 Clear-Zinc Coat Orange 500-Qty

    $349.99

    Features:

    • Cap-style head countersinks fully into the double top plate to avoid interference with drywall or finish trades
    • Wide tolerance on installation angle makes it easy to install the SDWC correctly
    • Can be installed from inside the structure, eliminating exterior work on the upper stories and enhancing job safety
    • Fastening can be performed before or after exterior sheathing is applied for added flexibility
    • Type-17 point for faster starts and easier driving
    Simpson Strong-tie SDWC15600B-KT Product Page
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 25] DeWalt 7427SD1-PWR 1/2 in x 8-1/2 in Power-Stud+ SD1 Wedge Expansion Anchor

    $33.75

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • product image

    Werner NSRP-72-6 Scaffold Caster Locking Pins, 5 in, Set of 4

    Features:

    • Scaffold caster locking pins for Werner NSRS-72, NSRS-72T, NSRS-72MP, SRS-72
    • Chrome/silver finish steel construction
    • Sold as a 4-pack
    Request QuoteDone
  • SD10212R500SD10212R500

    Simpson Strong-Tie SD10212R500 #10 x 2-1/2 In. Strong-Drive SD Connector Screw

    $85.99

    Features

    • SD10212R500 is approved for use in Simpson Strong-Tie connectors
    • Load-tested for reliability
    • Mechanically galvanized coating

    Technical and Installation Notes

    Add To CartDone
  • SD10112R500SD10112R500

    Simpson Strong-Tie SD10112R500 #10 x 1-1/2 In. Strong-Drive SD Connector Screw

    $61.99

    Features

    • SD10112R500 is approved for use in Simpson Strong-Tie connectors
    • Load-tested for reliability
    • Mechanically galvanized coating

    Technical and Installation Notes

    Add To CartDone
  • SD10112MBSD10112MB

    Simpson Strong-Tie SD10112MB #10 x 1-1/2 In. Strong-Drive SD Connector Screw

    $333.99

    Features

    • SD10112MB is approved for use in Simpson Strong-Tie connectors
    • Load-tested for reliability
    • Mechanically galvanized coating

    Technical and Installation Notes

    Add To CartDone
  • 14% OFF DSVT2SDSVT2S

    Simpson Strong-Tie DSVT2S #10 x 2 In. Quick Guard Coating DSV Collated Wood Screw

    Original price was: $148.99.Current price is: $127.99.

    Features

    • DSVT2S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
    • Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
    • T25 6-lobe driver bit: BITTX25
    • High-low threads with Type-17 point provides fast starts
    Add To CartDone
  • 14% OFF DSVT212SDSVT212S

    Simpson Strong-Tie DSVT212S #10 x 2-1/2 In. Quik Guard Coating DSV Collated Wood Screw

    Original price was: $128.99.Current price is: $110.99.

    Features

    • DSVT212S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
    • Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
    • T25 6-lobe driver bit: BITTX25
    • High-low threads with Type-17 point provides fast starts
    Add To CartDone
  • 14% OFF WSV2SWSV2S

    Simpson Strong-Tie WSV2S #9 x 2 In. Yellow-Zinc Coated Collated WSV Subfloor Screw

    Original price was: $147.99.Current price is: $126.99.

    Features

    • Dual-evaluated under ICC-ES AC233 and AC120 for wood-frame subfloor fastening
    • Yellow zinc coatings are applied in accordance with ASTM F1941
    • WSV2S features less wear on tools and more screws driven per battery charge
    • Deep 6-lobe recessed ribbed head provides clean countersinking
    Add To CartDone
  • STB2-37334STB2-37334

    [50 Pack] Simpson Strong-Tie STB2-37334 Strong-Bolt 2 — 3/8 in. x 3-3/4 in. Wedge Anchor

    $28.49

    Features

    • STB2-37334 has a chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck thickness of 2 1/2″ and 3 1/4″
    • Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
    Add To CartDone
  • STB2-50512STB2-50512

    [25 Pack] Simpson Strong-Tie STB2-50512 Strong-Bolt 2 — 1/2 in. x 5-1/2 in. Wedge Anchor

    Features

    • Chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck thickness of 2 1/2″ and 3 1/4″
    • Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
    Request QuoteDone
  • 7422SD1-PWR7422SD1-PWR

    [Pack of 50] DeWalt 7422SD1-PWR 1/2 in. X 3-3/4 in. Power-Stud Carbon Steel Wedge Expansion Anchor

    $45.58

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 7413SD1-PWR7413SD1-PWR

    [Pack of 50] DeWalt 7413SD1-PWR 3/8 In. x 3 In. Power Stud Carbon Steel Wedge Expansion Anchor

    $17.29

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7420SD1-PWR 1/2 X 2-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    $36.99

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7416SD1-PWR 3/8 X 5 Power-Stud Plus SD1 Wedge Expansion Anchor

    $26.65

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7412SD1-PWR 3/8 X 2-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    $17.79

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 03797-PWR

    Dewalt 03797-PWR Spike Forming 3/16 X 2 3/4

    $47.96

    Features

    • 03797-PWR offer a Pre-expanded anchor design which allows for easy installation
    • Mushroom and flat head Spike anchors are tamper-proof
    • Forming Spike, which is removable, can be used for temporary installations
    • Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
    Add To CartDone
  • 3GWS503P3GWS503P

    [Pack of 100] Simpson Strong-Tie 3GWS503P Opti-Mesh 3-1/2 in. Epoxy Adhesive Plastic Screen Tube for 1/2 in. Rod for SET-3G

    $356.79

    Features

    • 3GWS503P features an integral Cap
    • Flanges
    • Open-Mesh Collar
    • Color-Coded, Formula-Specific Mesh

    3GWS503P Tech Sheet

    Add To CartDone
  • THD50400H6SSTHD50400H6SS

    [20 Pack] Simpson Strong-Tie THD50400H6SS Titen HD 1/2 in. x 4 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $182.46

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THD50400H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37300HC30[30 Pack] Simpson Strong-Tie THD37300HC30 Titen HD 3/8 in. x 3 in. Heavy-Duty Screw Anchor product image

    [30 Pack] Simpson Strong-Tie THD37300HC30 Titen HD 3/8 in. x 3 in. Heavy-Duty Screw Anchor

    $46.52

    Features

    • THD37300HC30 is tested in accordance with ACI 355.2, AC193 and AC106
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD501500HTHD501500H

    [5 Pack] Simpson Strong-Tie THD501500H Titen HD 1/2 in. x 15 in. Heavy-Duty Screw Anchor

    $65.15

    Features

    • THD501500H is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDC25300H6SSTHDC25300H6SS

    [50 Pack] Simpson Strong-Tie THDC25300H6SS Titen HD 1/4 in. x 3 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $190.14

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDC25300H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD501300H[5 Pack] Simpson Strong-Tie THD501300H Titen HD 1/2 in. x 13 in. Heavy-Duty Screw Anchor product image

    [5 Pack] Simpson Strong-Tie THD501300H Titen HD 1/2 in. x 13 in. Heavy-Duty Screw Anchor

    $63.31

    Features

    • THD501300H is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD50300HC25THD50300HC25

    [25 Pack] Simpson Strong-Tie THD50300HC25 Titen HD 1/2 in. x 3 in. Heavy-Duty Screw Anchor

    $50.95

    Features

    • THD50300HC25 is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37300HMGTHD37300HMG

    [50 Pack] Simpson Strong-Tie THD37300HMG Titen HD 3/8 in. x 3 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $72.85

    Features

    • THD37300HMG is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD75812HMGTHD75812HMG

    [5 Pack] Simpson Strong-Tie THD75812HMG Titen HD 3/4 in. x 8-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $73.54

    Features

    • Code compliant
    • Fully removable
    • THD75812HMG undercutting thread design offers superior load transfer
    Add To CartDone
  • HDQ8-SDS3Simpson Strong-Tie HDQ8-SDS3 HDQ 14-in. Galvanized Holdown w/ Strong-Drive SDS Screws product image

    Simpson Strong-Tie HDQ8-SDS3 HDQ 14-in. Galvanized Holdown w/ Strong-Drive SDS Screws

    $77.26

    Features:

    • SDS screws are supplied with the holdowns to ensure proper fasteners are used
    • No stud bolts to countersink at openings
    • HDQ8-SDS3 Height: 14 in.
    • Made from 7-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Add To CartDone
  • THD50300HTHD50300H

    Simpson Strong-Tie THD50300H Titen HD 1/2 in. x 3 in. Heavy-Duty Screw Anchor

    $2.24

    Features:

    • THD50300H is qualified for static and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
    • Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
    • Hex-washer head requires no separate washer and provides a clean installed appearance
    Add To CartDone