construction fasteners built to support professional and DIY tasks with dependable power. Ideal for a wide range of uses requiring strength and consis
Showing 1–40 of 59 resultsSorted by popularity
-
[20 Pack] Simpson Strong-Tie THDB25178HC20 Titen HD 1/4 in. x 1-7/8 in. Heavy-Duty Screw Anchor
$15.18Features
- THDB25178HC20 is tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Simpson Strong-Tie THD50500HMG Titen HD 1/2 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$5.31Features:
- THD50500HMG is qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
27% OFF
Max CP-C838W7-SF 1-1/2×0.145in PowerLite High Pressure Smooth Shank Concrete Pin
Original price was: $102.77.$75.00Current price is: $75.00.- CLOSEOUT SALE WHILE STOCK LASTS
- 1-1/2×0.145in Smooth Shank Concrete Pin
- Max Powerlite Fasteners
- Plywood To Concrete
- Fiber Cement Siding To Concrete
- Mechanically Galvanized Carbon Steel
-
[Pack of 50] DeWalt PFM1411380 1/2″ x 3″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc
$65.99Features
- PFM1411380 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
Simpson Strong-Tie PDPAWL-287 .157 in. x 2-7/8 in. Powder-Actuated Pin w/ 1 in. Washer
$16.04Features:
- The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
- Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
- Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
- .300-in. head diameter / .157-in. shank diameter
- 1-in. washer
-
[Pack of 100] DeWalt PFM1411060 1/4″ x 2-1/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc
$39.99Features
- PFM1411060 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
Simpson Strong-Tie SSDWP3S305 Deck-Drive DWP WOOD SS Screw Collated 10 x 3 in. T25 6-Lobe Type 305 1000-Qty
$296.41Features:
- Flat head
- SSDWP3S305 has a unique box thread design with raised-ridge technology greatly reduces driving torque
- Specially designed sharp point penetrates hard wood products with ease
- 6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
- Length: 3 in.
-
Simpson Strong-Tie STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor
$5.53Features:
- STB2-75812 offers a chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
- Tested per ACI355.2 and AC193
-
[10 Pack] Simpson Strong-Tie THDB62612H Titen HD 5/8 in. x 6-1/2 in. Heavy-Duty Screw Anchor
$37.23Features
- THDB62612H is tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Dewalt DFM12720 Ultracon+ Hwh 1/4 x 1-1/4
$10.99Features
- DFM12720 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
[50 Pack] Simpson Strong-Tie THD50234RH Titen HD 3/8 in. x 2-3/4 in. Threaded Rod Hanger for 1/2-in. Rod
$93.08Features
- Installs with standard-sized sockets
- THD50234RH is code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
- FM listed
-
[Pack of 100] Dewalt DFM12724 DEWALT Ultracon+ Hwh 1/4 X 2-1/4
$12.99Features
- DFM12724 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Simpson Strong-Tie SD9112R500 #9 x 1-1/2 In. Strong-Drive SD Connector Screw
$53.99Features
- SD9112R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
-
[Pack of 50] DeWalt 7424SD1-PWR 1/2 in x 5-1/2 in Power-Stud Plus SD1 Wedge Expansion Anchor, Carbon Steel
$42.35Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 100] DeWalt 7404SD1-PWR 1/4 X 3-1/4 Power-Stud Plus SD1 Wedge Expansion Anchor
$24.49Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 100] Dewalt DFM12726 Ultracon+ Hwh 1/4 X 2-3/4
$14.99Features
- DFM12726 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
[25 Pack] SImpson Strong-Tie THDC25238CS6SS Titen HD 1/4 in. x 2-3/8 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor
$102.31Features
- THDC25238CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
-
[50 Pack] Simpson Strong-Tie THD37600HMG Titen HD 3/8 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$188.46Features
- THD37600HMG is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[50 Pack] Simpson Strong-Tie THD37300H4SS Titen HD 3/8 in. x 3 in. Type 304 Stainless-Steel Heavy-Duty Screw Anchor
$223.08Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD37300H4SS is tested in accordance with ACI355.2, AC193 and AC106
-
[50 Pack] Simpson Strong-Tie THDB25300H Titen HD 1/4 in. x 3 in. Heavy-Duty Screw Anchor
$34.79Features
- THDB25300H is created with an efficient thread design
- Seismic-rated
- Fast installation
- Durable & strong
-
-
Simpson Strong-Tie SD9212MB #9 x 2-1/2 In. Strong-Drive SD Connector Screw
$269.99Features
- SD9212MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
-
Simpson Strong-Tie SD9112MB #9 x 1-1/2 In. Strong-Drive SD Connector Screw
$293.99Features
- SD9112MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
-
14% OFF
Simpson Strong-Tie HCKDSVT2S #10 x 2 In. Quick Guard Coating DSV Collated Wood Screw
Original price was: $73.99.$63.99Current price is: $63.99.Features
- HCKDSVT2S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
-
14% OFF
Simpson Strong-Tie DSVR158S #8 x 1-5/8 In. Quick Guard DSV Collated Wood Screw
Original price was: $166.99.$142.99Current price is: $142.99.Features
- DSVR158S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
-
14% OFF
Simpson Strong-Tie DSVG212S #10 x 2-1/2 In. DSV Collated Wood Screw
Original price was: $128.99.$110.99Current price is: $110.99.Features
- DSVG212S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
-
14% OFF
Simpson Strong-Tie WSVF2S #9 x 2 In. Quik Guard Coating Collated WSV Subfloor Screw
Original price was: $221.99.$190.99Current price is: $190.99.Features
- Dual-evaluated under ICC-ES AC233 and AC120 for wood-frame subfloor fastening
- Yellow zinc coatings are applied in accordance with ASTM F1941
- WSVF2S features less wear on tools and more screws driven per battery charge
- Deep 6-lobe recessed ribbed head provides clean countersinking
-
[Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer
$15.49[Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
[Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer
$13.39[Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer Drive pins with a .300″ head by Powers Fasteners have a specially designed point that allows it to properly penetrate into typical base materials for the purpose of permanently fastening a fixture to concrete, concrete block and structural steel. A plastic flute…
-
[Pack of 100] DeWalt 50096-PWR .300 Head Drive Pin 2In w-7/8In Washer
$13.79[Pack of 100] DeWalt .300 Head Drive Pin 2In w-7/8In Washer 50096-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
[Pack of 100] DeWalt 50034-PWR .300 Head Drive Pin 1 1/2 In
$6.79[Pack of 100] DeWalt .300 Head Drive Pin 1 1/2 In 50034-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
[Pack of 100] DeWalt 50032-PWR Powers .300 Head Pin 1 1/4 In.
$12.75Features
- Drive pins with a 0.300″ diameter head
- Plastic flute is mounted on the pin shank
- Fastening a fixture to concrete, concrete over steel deck, concrete masonry walls
- The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
-
[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In.
$11.50h3>[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In. Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to increase performance in…
-
[Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head
$12.50[Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to…
-
[Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head
$12.50[Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
[Pack of 50] DeWalt 7414SD1-PWR 3/8 X 3-1/2 Power-Stud Plus SD1 Wedge Expansion Anchor
$24.50Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 50] DeWalt 7410SD1-PWR 3/8 X 2-1/4 Power-Stud Plus SD1 Wedge Expansion Anchor
$16.99Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 100] Dewalt 7402SD1-PWR 1/4 X 2-1/4 Power-Stud Plus SD1 Wedge Expansion Anchor
$22.35Features
- Structural connections, i.e., bean and column anchorage
- Safety related attachments
- Interior applications / low level corrosion environment
- Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers
- Seismic and wind loading
-
-
Dewalt DFM12724B Ultracon+ Hwh 1/4 X 2-1/4
$19.15Features
- DFM12724B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
