concrete fastening

concrete fastening built to support professional and DIY tasks with dependable power. Ideal for a wide range of uses requiring strength and consistenc

  • 02820-PWR

    [Pack of 100] Dewalt 02820-PWR 1/4″ X 1-1/2″ Zamac Nailin Hammer Drive Anchor, Mushroom Head

    $16.00

    Features

    • General purpose anchoring
    • 02820-PWR installs in a variety of base materials
    • Roof Flashing
    • Mechanical Attachments
    Add To CartDone
  • 08321SD-PWR08321SD-PWR

    DeWalt 08321SD-PWR Pure110+ 20.5 Oz [610Ml] 1-1

    $36.69

    Features

    • Designed for use with threaded rod and reinforcing bar hardware elements
    • Evaluated and recognized for freeze/thaw performance
    • Cartridge design allows for multiple uses using extra mixing nozzles
    • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
    • Evaluated and recognized for long term and short term loading (see performance tables)
    Add To CartDone
  • Max CP-C838W7-SF 1-1/2x0.145in PowerLite High Pressure Smooth Shank Concrete Pin product imageMax CP-C838W7-SF 1-1/2x0.145in PowerLite High Pressure Smooth Shank Concrete Pin product image

    Max CP-C838W7-SF 1-1/2×0.145in PowerLite High Pressure Smooth Shank Concrete Pin

    Original price was: $102.77.Current price is: $75.00.
    • CLOSEOUT SALE WHILE STOCK LASTS
    • 1-1/2×0.145in Smooth Shank Concrete Pin
    • Max Powerlite Fasteners
    • Plywood To Concrete
    • Fiber Cement Siding To Concrete
    • Mechanically Galvanized Carbon Steel
    Add To CartDone
  • PFM1411800

    [Pack of 100] DeWalt PFM1411020 1/4″ x 1-3/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    $29.95

    Features

    • PFM1411020 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartDone
  • CP-W833W4SP

    Max CP-W833W4SP 1-1/4x.133in PowerLite High Pressure Step Shank Concrete/ Steel Pin


    Request QuoteDone
  • Powder actuated fasteners

    Simpson Strong-Tie PDPAWL-287 .157 in. x 2-7/8 in. Powder-Actuated Pin w/ 1 in. Washer

    $16.04

    Features:

    • The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
    • Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
    • Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
    • .300-in. head diameter / .157-in. shank diameter
    • 1-in. washer
    Simpson Strong-tie PDPAWL-287 Product Page
    Add To CartDone
  • APB66RAPB66R

    Simpson Strong-Tie APB66R Adjustable Post Base

    $46.29

    Features

    • Designed to meet stringent building codes for seismic or high-wind events
    • Features 1″ standoff to help prevent rot at post end
    • Outdoor Accents side plates available (see APBDSP)
    Add To CartDone
  • 02820-PWR

    [Pack of 100] Dewalt 02814-PWR 1/4″ X 1-1/4″ Zamac Nailin Hammer Drive Anchor, Mushroom Head

    $10.99

    Features

    • General purpose anchoring
    • 02814-PWR installs in a variety of base materials
    • Roof Flashing
    • Mechanical Attachments
    Add To CartDone
  • HN 120HN120

    Max HN120 Powerlite High Pressure Concrete Pinner to 2-1/2in 500psi

    $1,155.81

    Features

    • Safer than conventional concrete pinn
    • Drives .307″ head pins into concrete or steel with 2,231 inch lbs. driving force.
    • Only 6.4lbs-this lightweight tool has less recoil than P.A.T tools.
    • Self-cleaning filter for reliable operations
    Add To CartDone
  • THD50500H4SSTHD50500H4SS

    [20 Pack] Simpson Strong-Tie THD50500H4SS Titen HD 1/2 in. x 5 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $160.00

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THD50500H4SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • DFM12724

    [Pack of 100] Dewalt DFM12726 Ultracon+ Hwh 1/4 X 2-3/4

    $14.99

    Features

    • DFM12726 is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
    • Does not exert expansion forces
    Add To CartDone
  • DFD270SKDFD270SK

    Dewalt DFD270SK Fully-Automatic .27 Caliber Powder-Actuated Tool [Single Shot Kit]

    $1,033.99

    Features

    • Drives into concrete and steel substrates for application versatility
    • Adjustable power settings for application versatility
    • Automatic piston return and load advancement for fast application speed
    • Tool-free disassembly for easy, onsite cleaning and serviceability
    Add To CartDone
  • THDC25238CS6SSTHDC25238CS6SS

    [25 Pack] SImpson Strong-Tie THDC25238CS6SS Titen HD 1/4 in. x 2-3/8 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor

    $102.31

    Features

    • THDC25238CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB25178CSTHDB25178CS

    [100 Pack] Simpson Strong-Tie THDB25178CS Titen HD 1/4 in. x 1-7/8 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $85.18

    Features

    • THDB25178CS is tested in accordance with ACI 355.2, AC193 and AC106
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • Max CP-C832W7-SF 1-1/4x0.142in PowerLite High Pressure Smooth Shank Concrete Pin product imageMax CP-C832W7-SF 1-1/4x0.142in PowerLite High Pressure Smooth Shank Concrete Pin product image

    Max CP-C832W7-SF 1-1/4×0.142in PowerLite High Pressure Smooth Shank Concrete Pin

    $98.26
    Add To CartDone
  • DGN845BDGN845B

    [Tool Only] DeWalt DGN845B 20V Max XR Trak-It C6 Gas Nailer

    Original price was: $928.99.Current price is: $836.09.

    Features

    • DGN845B includes a standard contact trip. Also compatible with the magnetic and Stick-E interchangeable contact trips (sold separately).
    • Shared Pin Collation – Tool design allows for fasteners to be used in the Trak-It C6 as well as the DCN890 and DCN891.
    • Improved Fuel Cell – Fastens up to 443 Linear Feet of Drywall track
    • Innovative power tools designed to deliver certainty for the world’s toughest pros
    • Track and manage this TOOL CONNECT CHIP-READY product (chip sold separately) in the TOOL CONNECT system
    Add To CartDone
  • STB2-37334STB2-37334

    [50 Pack] Simpson Strong-Tie STB2-37334 Strong-Bolt 2 — 3/8 in. x 3-3/4 in. Wedge Anchor

    $28.49

    Features

    • STB2-37334 has a chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck thickness of 2 1/2″ and 3 1/4″
    • Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
    Add To CartDone
  • 55310-PWR

    [800 Pack] DeWalt 55310-PWR 5 Pin St. .102×3/4 ZP

    $62.80

    Features

    • Pins for Concrete and Concrete Masonry (CMU)
    • Gas Fasteners
    • Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
    • Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
    Add To CartDone
  • 08288-PWR

    DeWalt 08288-PWR 1 In. Wire Brush for Ansi Hole No. 7 Rebar

    $13.99

    DeWalt 08288-PWR 1 In. Wire Brush for Ansi Hole No. 7 Rebar

    Add To CartDone
  • 08288-PWR

    DeWalt 08287-PWR Wire Brush for 7/8 In. Ansi Hole No. 6 Rebar

    $22.99

    DeWalt 08287-PWR Wire Brush for 7/8 In. Ansi Hole No. 6 Rebar

    Add To CartDone
  • 08288-PWR

    DeWalt 08278-PWR Threaded Hole Cleaning Wire Brush – 7-7/8 In, 3/4 In [5/8 In Rod or No. 5 Rebar]

    $21.99

    DeWalt 08278-PWR Threaded Hole Cleaning Wire Brush – 7-7/8 In, 3/4 In [5/8 In Rod or No. 5 Rebar]

    Add To CartDone
  • 50100-PWR50100-PWR

    [Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer

    $15.49

    [Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…

    Add To CartDone
  • 50100-PWR50100-PWR

    [Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer

    $13.39

    [Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer Drive pins with a .300″ head by Powers Fasteners have a specially designed point that allows it to properly penetrate into typical base materials for the purpose of permanently fastening a fixture to concrete, concrete block and structural steel. A plastic flute…

    Add To CartDone
  • 50100-PWR

    [Pack of 100] DeWalt 50096-PWR .300 Head Drive Pin 2In w-7/8In Washer

    $13.79

    [Pack of 100] DeWalt .300 Head Drive Pin 2In w-7/8In Washer 50096-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….

    Add To CartDone
  • 50034-PWR

    [Pack of 100] DeWalt 50034-PWR .300 Head Drive Pin 1 1/2 In

    $6.79

    [Pack of 100] DeWalt .300 Head Drive Pin 1 1/2 In 50034-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….

    Add To CartDone
  • 50032-PWR50034-PWR

    [Pack of 100] DeWalt 50032-PWR Powers .300 Head Pin 1 1/4 In.

    $12.75

    Features

    • Drive pins with a 0.300″ diameter head
    • Plastic flute is mounted on the pin shank
    • Fastening a fixture to concrete, concrete over steel deck, concrete masonry walls
    • The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
    Add To CartDone
  • 50026-PWR

    [Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In.

    $11.50

    h3>[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In. Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to increase performance in…

    Add To CartDone
  • 50022-PWR

    [Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head

    $12.50

    [Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to…

    Add To CartDone
  • 50012-PWR

    [Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head

    $12.50

    [Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…

    Add To CartDone
  • 7422SD1-PWR7422SD1-PWR

    [Pack of 50] DeWalt 7422SD1-PWR 1/2 in. X 3-3/4 in. Power-Stud Carbon Steel Wedge Expansion Anchor

    $45.58

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 7413SD1-PWR7413SD1-PWR

    [Pack of 50] DeWalt 7413SD1-PWR 3/8 In. x 3 In. Power Stud Carbon Steel Wedge Expansion Anchor

    $17.29

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • SET3G10[Pallet of 900] Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension product image

    [Pallet of 900] Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension

    $21,228.00

    Features

    • SET3G10 REPLACES SET-XP10
    • Sustained load performance at elevated temperature.
    • Can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
    • Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.

    Anchor Technical Notes

    Add To CartDone
  • DCN890P2DCN890P2

    Dewalt DCN890P2 20V MAX XR Cordless Concrete Nailer Kit – Professional Grade Power Tool

    $1,005.99

    Features

    • Gas-free operation eliminates the need for fuel cells and provides a consistent, powerful alternative that operates on the DEWALT 20V MAX battery platform
    • Variable power settings allow for pin depth adjustment and substrate versatility
    • Field-serviceable driver blade reduces downtime of tool
    • Comparable application speed to gas concrete nailers
    • Dual LED worklights help illuminate work surface and provide onboard diagnostics
    Add To CartDone
  • Dewalt DFD270MKDFD270MK

    Dewalt DFD270MK Fully-Automatic .27 Caliber Powder-Actuated Tool [Magazine and Single Shot Kit]

    $1,171.99

    Features

    • The Dewalt DFD270MK drives into concrete and steel substrates for application versatility
    • Adjustable power settings for application versatility
    • Automatic piston return and load advancement for fast application speed
    • Magazine for driving collated fasteners
    • Tool-free disassembly for easy, onsite cleaning and serviceability
    Add To CartDone
  • THD37500HC30THD37500HC30

    [30 Pack] Simpson Strong-Tie THD37500HC30 Titen HD 3/8 in. x 5 in. Heavy-Duty Screw Anchor

    $68.78

    Features

    • THD37500HC30 is tested in accordance with ACI 355.2, AC193 and AC106
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDC25300CS6SSTHDC25300CS6SS

    [25 Pack] Simpson Strong-Tie THDC25300CS6SS Titen HD 1/4 in. x 3 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor

    Features

    • THDC25300CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Request QuoteDone
  • THD50500HTHD50500H

    [20 Pack] Simpson Strong-Tie THD50500H Titen HD 1/2 in. x 5 in. Heavy-Duty Screw Anchor

    $45.49

    Features

    • THD50500H is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • PDPAWLSimpson Strong-Tie PDPAWL-250 .157 in. x 2-1/2 in. Powder-Actuated Pin w/ 1 in. Washer product image

    Simpson Strong-Tie PDPAWL-250 .157 in. x 2-1/2 in. Powder-Actuated Pin w/ 1 in. Washer

    $17.17

    Features:

    • The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
    • PDPAWL is code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
    • Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
    • .300-in. head diameter / .157-in. shank diameter
    • 1-in. washer
    Add To CartDone
  • Simpson Strong-Tie WA62100 Wedge-All 5/8 in. x 10 in. Expansion Anchor product imageSimpson Strong-Tie WA62100 Wedge-All 5/8 in. x 10 in. Expansion Anchor product image

    Simpson Strong-Tie WA75414 Wedge-All 3/4 in. x 4-1/4 in. Expansion Anchor

    $2.66

    Features:

    • One-piece, wrap-around clip ensures uniform holding capacity
    • Threaded end is chamfered for ease of starting nut
    • Diameter: 3/4 in.
    • Length: 4-1/4 in.
    • Made from zinc-plated carbon steel
    Simpson Strong-tie WA75414 Product Page
    Add To CartDone