concrete anchors engineered to deliver consistent, high-quality results. Ideal for a wide range of uses requiring strength and consistency.
Showing all 14 resultsSorted by popularity
-
Simpson Strong-Tie THD50500HMG Titen HD 1/2 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$5.31Features:
- THD50500HMG is qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
[Pack of 50] DeWalt 7415SD1-PWR 3/8 X 3-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor
$23.35Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 100] Dewalt DFM12724 DEWALT Ultracon+ Hwh 1/4 X 2-1/4
$12.99Features
- DFM12724 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
[Pack of 50] DeWalt 7422SD1-PWR 1/2 X 3-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor
$34.49Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![[10 Pack] Simpson Strong-Tie THDB62800H Titen HD 5/8 in. x 8 in. Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/02/10-Pack-Simpson-Strong-Tie-THDB62800H-Titen-HD-58-in.-x-8-in.-Heavy-Duty-Screw-Anchor-8-600x600.jpg "[10-Pack]-Simpson-Strong-Tie-THDB62800H-Titen-HD-58-in.-x-8-in.-Heavy-Duty-Screw-Anchor-(8)")
[10 Pack] Simpson Strong-Tie THDB62800H Titen HD 5/8 in. x 8 in. Heavy-Duty Screw Anchor
$63.19Features
- THDB62800H has been tested for seismic-rated applications
- Corrosion-resistant
- Durable
- Removable
-
Dewalt 03797-PWR Spike Forming 3/16 X 2 3/4
$47.96Features
- 03797-PWR offer a Pre-expanded anchor design which allows for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
DEWALT 03794-PWR Spike Forming 1/4 X 2-3/4
$59.99Features
- 03794-PWR offers a pre-expanded anchor design, which allows for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
[15 Pack] Simpson Strong-Tie THD50800WH Titen HD 1/2 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor
$87.26Features
- THD50800WH is tested in accordance with ACI 355.2 and AC193
- Qualified for static, wind and seismic loading conditions
- Washer head allows screw anchor applications incompatible with a hex head
-
[50 Pack] Simpson Strong-Tie THD37400H6SS Titen HD 3/8 in. x 4 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor
$316.92Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD37400H6SS is tested in accordance with ACI355.2, AC193 and AC106
-
[25 Pack] Simpson Strong-Tie THDC25400CS6SS Titen HD 1/4 in. x 4 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor
$126.75Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THDC25400CS6SS is tested in accordance with ACI355.2, AC193 and AC106
-
Simpson Strong-Tie THD50300H Titen HD 1/2 in. x 3 in. Heavy-Duty Screw Anchor
$2.24Features:
- THD50300H is qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Simpson Strong-Tie THDB62400H Titen HD 5/8 in. x 4 in. Heavy-Duty Screw Anchor
$4.20Features:
- THDB62400H is qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Simpson Strong-Tie WA62812MG Wedge-All 5/8 in. x 8-1/2 in. Mechanically Galvanized Expansion Anchor
$6.68Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 5/8 in.
- Length: 8-1/2 in.
- Made from mechanically galvanized carbon steel
-
Simpson Strong-Tie WA62100MG Wedge-All 5/8 in. x 10 in. Mechanically Galvanized Expansion Anchor
$9.51Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 5/8 in.
- Length: 10 in.
- Made from mechanically galvanized carbon steel
