concrete anchoring

concrete anchoring engineered to deliver consistent, high-quality results. Ideal for a wide range of uses requiring strength and consistency.

  • AT3G10AT-3G

    Simpson Strong-Tie AT3G10 High-Strength Hybrid Acrylic Adhesive

    $18.00

    Features

    • AT3G10 offers excellent for use in cold weather conditions or applications where fast cure is required
    • Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
    • Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
    • Base material installation temperatures down to 0°F (-18°C)
    • Use in grout-filled CMU construction
    Add To CartDone
  • AT-XP Acrylic AT-XP10 10ozSimpson Strong-Tie CDT10S Manual Dispensing Tool for 10 oz. Single-Cartridge Adhesives product image

    Simpson Strong-Tie AT-XP10 AT-XP 9.4 oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    This item has been DISCONTINUED.

    • SEE AT3G10 FOR UPDATED MODEL
    Request QuoteDone
  • XP30

    Simpson Strong-Tie AT-XP30 30-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    This item has been DISCONTINUED.

    • SEE AT3G30 FOR UPDATED MODEL
    Request QuoteDone
  • SET3G22-NSimpson Strong-Tie SET3G22-N 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension product image

    Simpson Strong-Tie SET3G22-N 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension

    $52.79

    Features

    • SET3G22-N is ICC-ES ESR-4057 approved for post-installed anchoring and rebar splice design
    • Includes mixing nozzle and extension for simplified installation
    • Low-odor formula, approved for potable water applications
    • Compatible with wire brush cleaning or vacuum-drill systems without extra hole cleaning
    Add To CartDone
  • DIAB50 Simpson drop-in anchor

    Simpson Strong-Tie DIAB50 DIAB Drop-In Internally Threaded Anchor for 1/2-in. Rod

    $0.43

    Features:

    • Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
    • Positive-set marking system indicates when anchor is properly set
    • Zinc-plated carbon steel
    • Length: 2 in.
    • Drill bit diameter: 5/8 in.
    Simpson Strong-tie DIAB50 Product Page
    Minimum order quantity: 50
    Order in multiples of: 50
    Add To CartDone
  • APVB88RSimpson Strong-Tie APVB88R Adjustable Post Base for 8x8 posts with Z-MAX Powder Coating product image

    Simpson Strong-Tie APVB88R Adjustable Post Base for 8×8 posts with Z-MAX Powder Coating

    Original price was: $101.59.Current price is: $96.51.

    Features

    • APVB88R is designed to meet stringent building codes for seismic or high-wind events
    • Features 1″ standoff to help prevent rot at post end
    • Outdoor Accents side plates available (see APVBDSP)
    • Fastener holes are slightly offset to help prevent fastener interference
    Add To CartDone
  • THDB25178HC20THDB25178HC20

    [20 Pack] Simpson Strong-Tie THDB25178HC20 Titen HD 1/4 in. x 1-7/8 in. Heavy-Duty Screw Anchor

    $15.18

    Features

    • THDB25178HC20 is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • ET3G22-NET3G22-N

    [Pack of 8] Simpson Strong-Tie ET3G22-N 22-oz. Epoxy Adhesive Cartridge w/ Nozzle and Extension

    Original price was: $210.39.Current price is: $189.35.

    Features

    • ET3G22-N is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    • Ideal for general doweling and threaded rod applications
    • Multiple DOT (Department of Transportation) listings for infrastructure projects

    Anchor Technical Notes

    Add To CartDone
  • Simpson Strong-Tie ET-HP22-N ET-HP 22-oz. Epoxy Adhesive Cartridge with Nozzle product imageSimpson Strong-Tie ET-HP22-N ET-HP 22-oz. Epoxy Adhesive Cartridge with Nozzle product image

    Simpson Strong-Tie ET-HP22-N ET-HP 22-oz. Epoxy Adhesive Cartridge with Nozzle

    • This item has been DISCONTINUED.- SEE ET3G22-N FOR UPDATED MODEL
    Request QuoteDone
  • THD50612HTHD50612H

    [20 Pack] Simpson Strong-Tie THD50612H Titen HD 1/2 in. x 6-1/2 in. Heavy-Duty Screw Anchor

    $65.99

    Features

    • THD50612H provides reliable anchoring
    • Optimized thread design
    • Hardened tip
    • Hex washer head
    • Fully removable
    Add To CartDone
  • ET3G22-NET3G22-N

    Simpson Strong-Tie ET3G22-N 22-oz. Epoxy Adhesive Cartridge w/ Nozzle and Extension

    $28.39

    Features

    • ET3G22-Nis suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    • Ideal for general doweling and threaded rod applications
    • Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)

    Anchor Technical Notes

    Add To CartDone
  • THD37400CS6SSTHD37400CS6SS

    [25 Pack] Simpson Strong-Tie THD37400CS6SS Titen HD 3/8 in. x 4 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor

    $158.45

    Features

    • THD37400CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
    • Countersunk head allows screw anchor applications incompatible with a hex head
    • Available in 1/4″ and 3/8″ diameters
    Add To CartDone
  • THD75500HTHD75500H

    [5 Pack] Simpson Strong-Tie THD75500H Titen HD 3/4 in. x 5 in. Heavy-Duty Screw Anchor

    $38.93

    Features

    • THD75500H is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 25] DeWalt 7426SD1-PWR 1/2 X 7 Power-Stud Plus SD1 Wedge Expansion Anchor

    $34.49

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • THD50600WH[15 Pack] Simpson Strong-Tie THD50600WH Titen HD 1/2 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor product image

    [15 Pack] Simpson Strong-Tie THD50600WH Titen HD 1/2 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor

    $43.92

    Features

    • THD50600WH is tested in accordance with ACI 355.2 and AC193
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB25234H[50 Pack] Simpson Strong-Tie THDB25234H Titen HD 1/4 in. x 2-3/4 in. Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THDB25234H Titen HD 1/4 in. x 2-3/4 in. Heavy-Duty Screw Anchor

    $39.00

    Features

    • Efficient load transfer
    • Clean finish
    • THDB25234H is code compliant with (ACI355.2, AC193, and AC106)
    Add To CartDone
  • EDT22SEDT22S

    Simpson Strong-Tie EDT22S Steel Dispensing Tool for 22 oz. Adhesive Cartridges

    $99.99

    Features:

    • Manual dispensing tool
    • EDT22S features a steel carriage and is engineered for high-volume, continuous use
    • The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridge
    • For 22 oz. adhesive cartridges

     

    Simpson Strong-tie EDT22S Product Page
    Add To CartDone
  • SET3G10SET3G10

    Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension

    $29.39

    Features

    • SET3G10 REPLACES SET-XP10
    • Sustained load performance at elevated temperature.
    • For all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).

    Anchor Technical Notes

    Add To CartDone
  • THDB62100WH[10 Pack] Simpson Strong-Tie THDB62100WH Titen HD 5/8 in. x 10 in. Washer-Head Heavy-Duty Screw Anchor product image

    [10 Pack] Simpson Strong-Tie THDB62100WH Titen HD 5/8 in. x 10 in. Washer-Head Heavy-Duty Screw Anchor

    $87.26

    Features

    • THDB62100WH is tested in accordance with ACI 355.2 and AC193
    • For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • Simpson Strong-Tie STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor product imageSTB2-75812

    Simpson Strong-Tie STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor

    $5.53

    Features:

    • STB2-75812 offers a chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
    • Tested per ACI355.2 and AC193
    Add To CartDone
  • THDB62612HTHDB62612H

    [10 Pack] Simpson Strong-Tie THDB62612H Titen HD 5/8 in. x 6-1/2 in. Heavy-Duty Screw Anchor

    $37.23

    Features

    • THDB62612H is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDC25200H6SS[50 Pack] Simpson Strong-Tie THDC25200H6SS Titen HD 1/4 in. x 2 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THDC25200H6SS Titen HD 1/4 in. x 2 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $179.09

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDC25200H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD50234RHTHD50234RH

    [50 Pack] Simpson Strong-Tie THD50234RH Titen HD 3/8 in. x 2-3/4 in. Threaded Rod Hanger for 1/2-in. Rod

    $93.08

    Features

    • Installs with standard-sized sockets
    • THD50234RH is code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
    • FM listed
    Add To CartDone
  • THD37400CSTHD37400CS

    [50 Pack] Simpson Strong-Tie THD37400CS Titen HD 3/8 in. x 4 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $81.55

    Features

    • THD37400CS offers superior performance
    • Removable design
    • Reduced cam-out
    • Countersunk head profile
    Add To CartDone
  • THDB62600HTHDB62600H

    [10 Pack] Simpson Strong-Tie THDB62600H Titen HD 5/8 in. x 6 in. Heavy-Duty Screw Anchor

    $69.10

    Features

    • THDB62600H is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • STHD10STHD10

    Simpson Strong-Tie STHD10 STHD 24-5/8 in. 12-Gauge Galvanized Strap-Tie Holdown

    $20.79

    Features:

    • The nailing pattern on STHD10 allows for nailing to the edges of double 2x’s
    • Strap nail slots are countersunk to provide a lower nail head profile
    • The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
    • Standard strap length: 24-5/8 in.
    • Made from 12-gauge steel
    Add To CartDone
  • THDB25178HTHDB25178H

    [100 Pack] Simpson Strong-Tie THDB25178H Titen HD 1/4 in. x 1-7/8 in. Heavy-Duty Screw Anchor

    $68.00

    Features

    • THDB25178H is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDB62600WHTHDB62600WH

    [10 Pack] Simpson Strong-Tie THDB62600WH Titen HD 5/8 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor

    $49.43

    Features

    • THDB62600WH is tested in accordance with ACI 355.2 and AC193
    • Qualified for static, wind and seismic loading conditions
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB62800WHTHDB62800WH

    [10 Pack] Simpson Strong-Tie THDB62800WH Titen HD 5/8 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor

    $83.08

    Features

    • THDB62800WH is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB62800HMGTHDB62800HMG

    [10 Pack] Simpson Strong-Tie THDB62800HMG Titen HD 5/8 in. x 8 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $118.46

    Features

    • THDB62800HMG is tested in accordance with ACI 355.2, AC193 and AC106
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37400H4SSTHD37400H4SS

    [50 Pack] Simpson Strong-Tie THD37400H4SS Titen HD 3/8 in. x 4 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $244.62

    Features

    • THD37400H4SS is ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • Simpson Strong-Tie ABA44Z ABA ZMAX Galvanized Adjustable Standoff Post Base for 4x4 product imageSimpson Strong-Tie ABA44Z ABA ZMAX Galvanized Adjustable Standoff Post Base for 4x4 product image

    Simpson Strong-Tie ABA44Z ABA ZMAX Galvanized Adjustable Standoff Post Base for 4×4

    $10.71

    Features:

    • Attaches a post to existing concrete for decks, patio covers and other top-supported structures
    • Features 1-in. standoff to help prevent rot at post end
    • Slotted for adjustability
    • Designed for versatility, cost-effectiveness and maximum uplift performance
    • Nominal post size: 4×4
    Simpson Strong-tie ABA44Z Product Page
    Add To CartDone
  • 7446SD1-PWR concrete wedge anchor

    [Pack of 50] DeWalt 7414SD1-PWR 3/8 X 3-1/2 Power-Stud Plus SD1 Wedge Expansion Anchor

    $24.50

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • THDB62600HMGTHDB62600HMG

    [10 Pack] Simpson Strong-Tie THDB62600HMG Titen HD 5/8 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $74.46

    Features

    • THDB62600HMG is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • EMN22I-RP5

    Simpson Strong-Tie EMN22I-RP5 EMN22i Epoxy Mixing Nozzle 5-Qty

    $26.60

    Features:

    • An 18-element mixing nozzle for use with 22 oz. and 56 oz. epoxy adhesive cartridges
    • EMN22I-RP5 is a one-piece nozzle with integrated nut (separate retaining nut not required)
    • Once the epoxy hardens in the nozzle it can be used as a cap to keep the product fresh
    • Each nozzle is 14 in. long for use in all depths of holes
    • Quantity: 5
    Add To CartDone
  • THD37212CSTHD37212CS

    [50 Pack] Simpson Strong-Tie THD37212CS Titen HD 3/8 in. x 2-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $62.17

    Features

    • THD37212CS is tested in accordance with ACI 355.2, AC193 and AC106
    • Standard fractional sizes, hole size same as anchor size
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    Add To CartDone
  • THDC25238H6SSTHDC25238H6SS

    [50 Pack] Simpson Strong-Tie THDC25238H6SS Titen HD 1/4 in. x 2-3/8 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $183.25

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDC25238H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37300CS[50 Pack] Simpson Strong-Tie THD37300CS Titen HD 3/8 in. x 3 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THD37300CS Titen HD 3/8 in. x 3 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $72.26

    Features

    • THD37300CS is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB37158RHTHDB37158RH

    [50 Pack] Simpson Strong-Tie THDB37158RH Titen HD 1/4 in. x 1-5/8 in. Threaded Rod Hanger for 3/8-in. Rod

    Original price was: $64.92.Current price is: $61.02.

    Features

    • Designed to install using a rotary hammer or hammer drill with standard ANSI drill bits — no special tools required
    • THDB37158RH is code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
    • FM listed
    Add To CartDone
  • THDB62612HMGF1Simpson Strong-Tie THDB62612HMGF1 Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor product image

    Simpson Strong-Tie THDB62612HMGF1 Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $11.54

    Features

    • THDB62612HMGF1 is code-listed for exterior use
    • Fully removable
    • Hex washer head
    • Optimized thread design
    Add To CartDone