building hardware crafted for durability and steady performance across tough jobs. Ideal for a wide range of uses requiring strength and consistency.
Showing all 18 resultsSorted by popularity
-
Simpsons Strong-Tie H10A 18-Gauge Galvanized Hurricane Tie
$2.74Features
- Enhanced Stiffness
- Easy Installation
- H10A is made from 18-gauge steel for reliable strength
-
Simpson Strong-Tie MP24 MP 2 in. x 4 in. 20-Gauge Galvanized Mending Plate
$0.74Features:
- MP24 is versatile and easy-to-use mending plate for wood-to-wood connections
- These non-structural connectors are ideal for general fix-up work
- Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
- Used for non-structural applications only (not for truss applications)
- Width: 2 in.
-
Simpson Strong-Tie APLH210 Concealed-Flange Light Joist Hanger
$5.59Features
- APLH210 offers a strong & reliable connection to beams
- Durable construction
- Corrosion resistant finish
-
Simpson Strong-Tie LUS26Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×6
$1.45Features
- LUS26Z cannot be modified
- Works for a wide range of applications
- LUS-series hangers are tested, load rated and code compliant
-
Simpson Strong-Tie LUS210Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×10
$2.41Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- LUS210Z offers speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×10, 2×12, 2×14
-
Simpson Strong-Tie PA51 PA 51 in. 12-Gauge Galvanized Purlin Anchor
$21.83Features:
- Minimum concrete edge distance is 5 in.
- Minimum concrete block left-to-right edge distance is 20 in.
- PA51 Length: 51 in.
- For additional length, an MST strap can be attached using 1/2- bolts through existing holes
- Made from 12-gauge steel
-
Simpson Strong-Tie MASA MASA 16-Gauge Galvanized Mudsill Anchor
$1.85Features:
- Attaches easily to the concrete form for quick installation
- Lays flat on the form board so there is no anchor bolt to finish around
- No labor costs involved in drilling plates and aligning holes
- Flat design eliminates chances of modification in prefabricated walls
- Eliminates the need to notch studs due the anchor bolts being placed where it will interfere
-
Simpson Strong-Tie APVDJT2-6 Deck Joist Tie
$9.49Features
- The APVDJT2-6, part of the Avant Collection, boasts straight edges and chamfered corners for a clean, timeless look.
-
Dewalt DFM12720 Ultracon+ Hwh 1/4 x 1-1/4
$10.99Features
- DFM12720 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Simpson Strong-Tie HHUS48 HHUS Galvanized Face-Mount Joist Hanger for 4×8
$7.69Features:
- Features double-shear nailing which distributes the load through two points on each joist nail for greater strength
- Allows for the use of fewer nails, faster installation, and the use of standard nails for all connections
- Do not bend or remove tabs
- Nominal joist size: 4×8
- HHUS48 is made from 14-gauge steel
-
Simpson Strong-Tie CC5 1/4-6 CC Column Cap for 5-1/8 in. Beam, 6x Post
$124.29Features
- CC5 1/4-6 is rigorously tested for high-strength welds
- Seismic rated
- Code-compliant
- Temporary fastening
-
16% OFF
Simpson Strong-Tie CC7 1/8-6 CC Column Cap for 7 in. Beam, 6x Posts
Original price was: $161.69.$135.36Current price is: $135.36.Features
- Certified welds for confidence in strength and loading
- CC7 1/8-6 uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements
- Diamond holes to provide temporary fastening
-
Simpson Strong-Tie MP36 MP 3 in. x 6 in. 20-Gauge Galvanized Mending Plate
$1.29Features:
- A versatile and easy-to-use mending plate for wood-to-wood connections
- These non-structural connectors are ideal for general fix-up work
- Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
- Used for non-structural applications only (not for truss applications)
- Width: 3 in.
-
Werner AH2510C Aluminum Attic Ladder, 25 in x 54 in Opening, 8 ft?10 ft Ceiling, 375 lb Load
Features:
- Universal aluminum attic ladder with 375 lb Type IAA duty rating
- Gas strut design for smooth, quiet operation and wide access opening
- Wide, slip-resistant steps and non-marring feet
- Fits ceiling heights from 8 ft to 10 ft; recessed opening 25 in x 54 in
-
Simpson Strong-Tie H1Z H1 18-Gauge ZMAX Galvanized Hurricane Tie
Features:
- H1Z holds the rafter or truss on both sides for high lateral load resistance
- Used for a variety of connections where one member crosses another
- Can be installed on inside or outside of wall, or both sides
- Can be installed with flanges facing either inward or outward
- Made from 18-gauge steel
-
Simpson Strong-Tie LTT20B LTT 19-3/4 in. 12-Gauge Light Tension Tie – DISCONTINUED
Features:
- Discontinued
- Designed for nail- or bolt-on applications
- For use in vertical or horizontal applications
- 5/16 in. seat thickness
- Length: 19-3/4 in.
- Made from 12-gauge steel
-
Simpson Strong-Tie HTS20 HTS 20 in. 14-Gauge Galvanized Heavy Twist Strap
$3.02Features:
- Available with the bend reversed; specify –REV- after the model number, such as HTS20-REV
- Versatile with many lengths offered to fit the specific application
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Length: 20 in.
- Made from 14-gauge steel
-
Simpson Strong-Tie N10D5HDG-R Strong-Drive SCN SMOOTH-SHANK CONNECTOR Nail 1-1/2 in. x 0.148 in. HDG 600-Qty
$25.46Features:
- Simpson Strong-Tie Connector nails are the best choice for Simpson Strong-Tie connectors
- Head ID stamp for easy identification
- Smooth shank
- Smooth head
- Length: 1-1/2 in.
