Building materials from dimensional lumbers, to fasteners, vapor barrier, and more.
Showing 241–280 of 946 resultsSorted by popularity
-
Simpson Strong-Tie SD9112R500 #9 x 1-1/2 In. Strong-Drive SD Connector Screw
$53.99Features
- SD9112R500 is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
-
Simpson Strong-Tie SD9112MB #9 x 1-1/2 In. Strong-Drive SD Connector Screw
$293.99Features
- SD9112MB is approved for use in Simpson Strong-Tie connectors
- Load-tested for reliability
- Mechanically galvanized coating
-
Simpson Strong-Tie EIF-EZ Epoxy E-Z Click Injection Port Fitting
$18.99Features
- EIF-EZ positive connection eliminates messy leakage, minimizing waste and clean-up
- No drilling of ports
- Disconnect fitting from the E-Z-Click port and the epoxy stops flowing, no leaky mess.
-
[Bucket] Grip-Rite LP212STBK PrimeGuard Plus #9 x 2-1/2 in. Green Star Bugle-Head Deck Screws
$98.99Features
- Type 17 point to reduce pre-drilling while engaging rapidly with the project material, helping to prevent splitting
- Countersinking bugle head prevents heads from popping out, leaves smooth finish
- Feature a proprietary polymer coating that protects the fastener against corrosive elements
- LP212STBK comes in a 25 lb bucket
-
![TW1061T-USA [Roll]](https://www.heydensupply.com/wp-content/uploads/2020/11/TW1061T-1000x1000-1-600x600.jpg "TW1061T-USA [Roll]")
[48 CASE PALLET] TW1061T | MAX TwinTier 19Ga Black Annealed Steel Rebar Tie Wire
Features:
- Full pallet 48 Cases Tie Wire
- Buy from an authorized Max USA Master Distributor
- Annealed steel wire – diameter 1.0mm
- For use with MAX RB441T, RB443T TwinTier, RB611T, and RB401T-E TwinTier
-
[Pack of 800] DeWalt 55325-PWR Hd-Steel C5 Pin .120 Taper X 1/2 MZ
$69.99Features
- International Code Council, Evaluation Service (ICC-ES), ESR-3275
- Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
- Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
- Manufactured by DEWALT
-
[Pack of 25] DeWalt 7427SD1-PWR 1/2 in x 8-1/2 in Power-Stud+ SD1 Wedge Expansion Anchor
$33.75Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 50] DeWalt 7424SD1-PWR 1/2 in x 5-1/2 in Power-Stud Plus SD1 Wedge Expansion Anchor, Carbon Steel
$42.35Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 100] DeWalt 7404SD1-PWR 1/4 X 3-1/4 Power-Stud Plus SD1 Wedge Expansion Anchor
$24.49Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 100] Dewalt DFM12726 Ultracon+ Hwh 1/4 X 2-3/4
$14.99Features
- DFM12726 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
[Pack of 100] Simpson Strong-Tie 3GWS506P Opti-Mesh 6 in. Epoxy Adhesive Plastic Screen Tube for 1/2 in. Rod for SET-3G
$373.69Features
- 3GWS506P features an integral Cap
- Flanges
- Open-Mesh Collar
- Color-Coded, Formula-Specific Mesh
-
![[Pack of 12] Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension product image](https://www.heydensupply.com/wp-content/uploads/2024/01/Simpson-Strong-Tie-SET3G10-8.5-oz-600x600.jpg)
[Pack of 12] Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension
$316.84Features
- SET3G10 REPLACES SET-XP10
- Improved sustained load performance at elevated temperature.
-
Dewalt DFD270SK Fully-Automatic .27 Caliber Powder-Actuated Tool [Single Shot Kit]
$1,033.99Features
- Drives into concrete and steel substrates for application versatility
- Adjustable power settings for application versatility
- Automatic piston return and load advancement for fast application speed
- Tool-free disassembly for easy, onsite cleaning and serviceability
-
![[50 Pack] Simpson Strong-Tie THDB25412CS Titen HD 1/4 in. x 4-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/01/50-Pack-Simpson-Strong-Tie-THDB25412CS-Titen-HD-14-in.-x-4-12-in.-Zinc-Plated-Countersunk-Head-Heavy-Duty-Screw-Anchor-7-600x600.jpg "[50-Pack]-Simpson-Strong-Tie-THDB25412CS-Titen-HD-14-in.-x-4-12-in.-Zinc-Plated-Countersunk-Head-Heavy-Duty-Screw-Anchor-(7)")
[50 Pack] Simpson Strong-Tie THDB25412CS Titen HD 1/4 in. x 4-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor
$56.28Features
- THDB25412CS is tested in accordance with ACI 355.2, AC193 and AC106
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
-
![[20 Pack] Simpson Strong-Tie THD50400H Titen HD 1/2 in. x 4 in. Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/02/20-Pack-Simpson-Strong-Tie-THD50400H-Titen-HD-12-in.-x-4-in.-Heavy-Duty-Screw-Anchor-8-600x600.jpg "[20-Pack]-Simpson-Strong-Tie-THD50400H-Titen-HD-12-in.-x-4-in.-Heavy-Duty-Screw-Anchor-(8)")
[20 Pack] Simpson Strong-Tie THD50400H Titen HD 1/2 in. x 4 in. Heavy-Duty Screw Anchor
$44.99Features
- THD50400H has been tested for seismic-rated applications
- Strong grip
- Durable build
- Effortless installation
-
[25 Pack] SImpson Strong-Tie THDC25238CS6SS Titen HD 1/4 in. x 2-3/8 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor
$102.31Features
- THDC25238CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
-
[50 Pack] Simpson Strong-Tie THDB25312CS Titen HD 1/4 in. x 3-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor
$53.42Features
- THDB25312CS is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
-
[50 Pack] Simpson Strong-Tie THD37600HMG Titen HD 3/8 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor
$188.46Features
- THD37600HMG is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[10 Pack] Simpson Strong-Tie THDB62800H6SS Titen HD 5/8 in. x 8 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor
$177.69Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THDB62800H6SS is tested in accordance with ACI355.2, AC193 and AC106
-
![[20 Pack] Simpson Strong-Tie THD50600H6SS Titen HD 1/2 in. x 6 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/01/20-Pack-Simpson-Strong-Tie-THD50600H6SS-Titen-HD-12-in.-x-6-in.-Type-316-Stainless-Steel-Heavy-Duty-Screw-Anchor-11-600x600.jpg "[20 Pack] Simpson Strong-Tie THD50600H6SS Titen HD 12 in. x 6 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor (11)")
[20 Pack] Simpson Strong-Tie THD50600H6SS Titen HD 1/2 in. x 6 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor
$231.08Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD50600H6SS is tested in accordance with ACI355.2, AC193 and AC106
-
[50 Pack] Simpson Strong-Tie THD37500H Titen HD 3/8 in. x 5 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor
$346.15Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD37500H is tested in accordance with ACI355.2, AC193 and AC106
-
[50 Pack] Simpson Strong-Tie THD37300H4SS Titen HD 3/8 in. x 3 in. Type 304 Stainless-Steel Heavy-Duty Screw Anchor
$223.08Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD37300H4SS is tested in accordance with ACI355.2, AC193 and AC106
-
[50 Pack] Simpson Strong-Tie THD37500H Titen HD 3/8 in. x 5 in. Heavy-Duty Screw Anchor
$95.38Features
- THD37500H is tested in accordance with ACI 355.2, AC193 and AC106
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- Reuse of the anchor will not achieve listed loads and is not recommended
-
[100 Pack] Simpson Strong-Tie THDB25178CS Titen HD 1/4 in. x 1-7/8 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor
$85.18Features
- THDB25178CS is tested in accordance with ACI 355.2, AC193 and AC106
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
-
[10 Pack] Simpson Strong-Tie THDB62500H Titen HD 5/8 in. x 5 in. Heavy-Duty Screw Anchor
$41.85Features
- High Performance
- Efficient load transfer
- Fast installation
- THDB62500H is heat treated at the tip to ensure optimal hardness
-
![[50 Pack] Simpson Strong-Tie THDC25400H6SS Titen HD 1/4 in. x 4 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/01/50-Pack-Simpson-Strong-Tie-THDC25400H6SS-Titen-HD-14-in.-x-4-in.-Type-316-Stainless-Steel-Heavy-Duty-Screw-Anchor-8-600x600.jpg "[50-Pack]-Simpson-Strong-Tie-THDC25400H6SS-Titen-HD-14-in.-x-4-in.-Type-316-Stainless-Steel-Heavy-Duty-Screw-Anchor-(8)")
[50 Pack] Simpson Strong-Tie THDC25400H6SS Titen HD 1/4 in. x 4 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor
$202.26Features
- THDC25400H6SS is ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Tested in accordance with ACI355.2, AC193 and AC106
-
[50 Pack] Simpson Strong-Tie THDB25300H Titen HD 1/4 in. x 3 in. Heavy-Duty Screw Anchor
$34.79Features
- THDB25300H is created with an efficient thread design
- Seismic-rated
- Fast installation
- Durable & strong
-
![FPBS44[4PCK]](https://www.heydensupply.com/wp-content/uploads/2023/01/4-Pack-Simpson-Strong-Tie-FPBS444PCK-E-Z-Spike-Black-Powder-Coated-Post-Base-Spike-for-4x4-4-600x600.jpg)
![[4 Pack] Simpson Strong-Tie FPBS44[4PCK] E-Z Spike Black Powder-Coated Post-Base Spike for 4x4 product image](https://www.heydensupply.com/wp-content/uploads/2023/01/4-Pack-Simpson-Strong-Tie-FPBS444PCK-E-Z-Spike-Black-Powder-Coated-Post-Base-Spike-for-4x4-2-600x600.jpg "[4-Pack]-Simpson-Strong-Tie-FPBS44[4PCK]-E-Z-Spike-Black-Powder-Coated-Post-Base-Spike-for-4×4-(2)")
[4 Pack] Simpson Strong-Tie FPBS44[4PCK] E-Z Spike Black Powder-Coated Post-Base Spike for 4×4
$139.08Features:
- FPBS44[4PCK] can be used where quick-to-install posts are needed, including fencing and mailbox applications
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive SDS Connector screw
-
-
-
-
-
-
-
ESKona4 Marshalltown Elements Stain Kona Brown
$30.04Features
- ESKona4item has a 15 day lead-time before shipping
- Latest nanopigment technology
ELEMENTS STAIN, KONA BROWN
-
-
ESTannin4 Marshalltown Elements Stain Tannin
$30.04Features
- This item has a 15 day lead-time before shipping
- Features the latest in nanopigment technology
-
-
-
