Parts and accessories for scaffolding systems
Showing 1–40 of 53 resultsSorted by popularity
-
Werner TW4A-8U Wide Span 8 ft Scaffold Toeboard Assembly, Aluminum
Features:
- Aluminum toeboard assembly for Wide Span scaffolds
- Provides added edge protection on platforms
- Toeboards extend 3.5 in above platform surface
- Durable, lightweight construction
-
Werner TW4A-6U Wide Span 6ft Scaffold Toeboard Assembly, Aluminum
Features:
- Wide Span 6ft toeboard assembly for scaffold platforms
- Aluminum construction
- Provides added edge protection
- Toeboards extend 3.5 inches above platform surface
-
Werner TW4A-10U Wide Span 10 ft Scaffold Toeboard Assembly, Aluminum
Features:
- Aluminum construction for flexible, durable scaffold setups
- Adds edge protection; toeboards extend 3.5 in above platform
- Compatible with Wide Span scaffold systems
- Components available separately for easy configuration
-
Werner TN4A-10U Narrow Span 10ft Scaffold Toeboard Assembly, Aluminum
Features:
- Provides added protection on scaffolding
- Toeboards extend 3.5 inches above platform surface
- Durable aluminum construction
-
Werner T510045 60ft Material Hoist, 450 lb Capacity, Galvanized Steel Cable
Features:
- 60 ft of 3/16 in galvanized steel cable
- Raises and lowers loads up to 450 lb
- Hoist for materials only; personnel prohibited
- Requires T510080B and T100008B brackets to mount on T100108 tripod
- Meets ANSI A10.5 and OSHA standards
-
Werner STB-13 Toeboard 156 in x 3.5 in Cut Length, Aluminum
Features:
- 3.5-inch square aluminum toeboard with 156-inch cut length
- Works with Werner guardrails and end rails to build 1, 2, or 3-sided guardrail systems
- Designed for Werner stages; narrow span compatible
-
Werner STB-09 Toeboard 108 in x 3.5 in, Aluminum
Features:
- 3.5-inch square aluminum toeboard
- 108-inch cut length for Werner stages
- Works with guardrails and end rails to build 1, 2, or 3-sided systems
-
Werner SSP-47 Stanchion Post Assembly, Aluminum, 48 in Length
Features:
- Stanchion post assembly for Werner stage guardrail systems
- Allows installation of toeboards, guardrails, and end rails
- Supports creating 1?4 sided guardrail configurations
- Durable aluminum construction
- Approx. 48 in length; lightweight at 5 lb
-
Werner SRO-72-4 Outrigger Kit, 18 in Wide for SRS-72/SRS-72T Steel Rolling Scaffolds, Set of 4
Features:
- Fits Werner SRS-72 and SRS-72T steel rolling scaffolds
- Set of four outriggers widens scaffold footprint for stability
- Requires SRC-72-4 casters (sold separately)
- Required when working height reaches 10 ft
- Powder-coated steel construction; 1,000 lb load capacity (evenly distributed)
-
Werner SRG-72 Guardrail and Toeboard Kit for SRS-72 Steel Rolling Scaffold, Yellow
Features:
- Fits Werner 6 ft SRS-72 Steel Rolling Scaffold
- Guardrails required when working height reaches 10 ft
- Powder-coated steel resists weather and rust
- Rated 1,000 lb evenly distributed
-
Werner SRD-72 Plywood Deck for SRS-72 Steel Rolling Scaffold, 28.5 in W x 66.72 in H x 1 in
Features:
- Replacement deck for Werner SRS-72 steel rolling scaffold
- Plywood with powder-coated steel edges
- Fits scaffold with locking pin attachment
- Platform height adjustable in 2 in increments when used with scaffold
- Load capacity: 1,000 lb (evenly distributed)
-
Werner SRC-72-4 Replacement Casters for SRC-72 Steel Rolling Scaffold, Set of 4, 1,000 lb Capacity
Features:
- Fits Werner 6 ft SRS-72 Steel Rolling Scaffold
- Locking casters swivel for 360-degree mobility
- Set of four casters; black/chrome finish
- 1,000 lb load capacity (evenly distributed)
-
Werner SPJ-WB Steel Workbench Guardrail Combo, 25.7 in L x 9.8 in W x 5.76 in H
Features:
- Easily attaches to pump jack pole for quick setup
- Provides a convenient work surface at comfortable height
- Accommodates platforms up to 20 inches wide
- Economical, durable steel construction
- Meets ANSI A10.8-2001 and OSHA standards
-
Werner SPJ-SBF Foldable Support Brace for Steel Pump Jack System, 48.2 in Length, Blue
Features:
- Easily attaches to pump jack pole
- Swivels for easy attachment and positioning
- Provides triangular bracing per OSHA standards
- Economical and easy to operate
- Meets ANSI A10.8 and OSHA requirements
-
Werner SPJ-PA-4 Pole Anchor for Steel Pump Jack System, 11.7 in L x 8.16 in W x 8.16 in H
Features:
- Easily attaches to pump jack pole
- Provides a mudsill when firm base is not available
- Accommodates planks up to 24 inches wide
- Economical and easy to operate
- Meets ANSI A10.8-2001 and OSHA standards
-
Werner SPJ-GRH Steel Guardrail Holder for Pump Jack Systems, 25.6 in L x 5.6 in W x 6.5 in H
Features:
- Easily attaches to pump jack pole
- Holds 2×4 upper and mid-level guardrails per OSHA standards
- Accommodates planks up to 24 in wide
- Economical, steel construction; simple to operate
- Meets ANSI A10.8-2001 and OSHA requirements
-
Werner SGR-13 Guardrail, 156 in Length x 1.5 in Square, Aluminum
Features:
- 156 in length, 1.5 in square aluminum guardrail
- Combines with end rails and toe boards for 1-, 2-, or 3-sided systems
- Lightweight aluminum construction
- Designed for Werner stages
-
Werner SGR-09 Guardrail 108 in x 1.5 in Square, Aluminum
Features:
- 108 in length, 1.5 in square guardrail
- Aluminum construction
- Design 1-, 2-, or 3-sided guardrail systems for Werner stages
-
Werner PJ-WB Workbench Aluminum Pump Jack, 21.6 in L x 21.6 in W x 8.1 in H
Features:
- Field-replaceable workbench for Werner aluminum pump jack systems
- Durable aluminum construction
- Versatile, dependable, and easy to operate
- Designed for use with nestable stages
-
Werner PJ-SBF Foldable Support Brace for Aluminum Pump Jack, 54 in Length, Blue
Features:
- Foldable support brace for Werner aluminum pump jack systems
- Pivot points install on varying surface angles
- Versatile, dependable, and easy to operate
- Rigid version also available
- Powder-coated finish
-
Werner PJ-ERW Wide End Rail Kit for Aluminum Pump Jack, 48 in Length, 8.75 in Width, 4.75 in Height
Features:
- Field-replaceable wide end rail kit for nestable aluminum pump jack stages
- Easy to assemble for quick setup
- Compatible with 20 in and 24 in wide stages
- Durable aluminum construction
-
Werner PJ-ERN Narrow End Rail Kit for Aluminum Pump Jack, 48 in Length
Features:
- Field-replaceable narrow end rail kit for nestable stages
- Designed for Werner Aluminum Pump Jack systems
- Durable aluminum construction
- Versatile and easy to operate
-
Werner PJ-6P 6ft Pole Aluminum Pump Jack, 75 in L x 3.4 in W x 3.01 in H
Features:
- Durable aluminum pole for Werner PJ Series pump jack systems
- Versatile, dependable, and easy to operate
- Field-replaceable component for nestable stages
- Rated for up to 50 ft working height
- Rubber pad mechanically fastened for strong bond
-
Werner PJ-12P 12ft Aluminum Pump Jack Pole, 147 in L x 3.4 in W x 3.01 in H
Features:
- Durable aluminum pole for Werner PJ Series pump jack systems
- Rated for up to 50 ft working height; industry-standard compatible
- Field-replaceable component for nestable stages
- Versatile, dependable, and easy to operate
-
Werner PD22W-8 Wood Scaffold Deck with Access Door, 8 ft x 22 in, Gray
Features:
- 8 ft x 22 in deck with access door for aluminum scaffold towers
- Aluminum rails with plywood decking
- Compatible with narrow span and wide span scaffolding
- Durable construction for jobsite use
-
Werner PD22W-6 Wood Scaffold Deck with Access Door, 6 ft x 22 in, 3 in Height, 33 lb
Features:
- 6 ft scaffold board with integrated access door
- 22 in wide deck fits narrow and wide span aluminum scaffolding
- Plywood decking with aluminum rails for durability
- Compatible components available to adjust tower length or height
-
Werner PD22W-10 Wood Scaffold Deck with Access Door, 10 ft x 22 in, Gray
Features:
- 10-foot scaffold board with integrated access door
- 22-inch wide aluminum rails with plywood decking
- Fits narrow span and wide span aluminum scaffold towers
-
Werner P22W-8 8ft Scaffold Board, 22 in Wide, Aluminum Rails with Plywood Deck
Features:
- 8-foot scaffold board with plywood deck
- 22-inch wide aluminum rails for stability
- For narrow span and wide span aluminum scaffolding
-
Werner P22W-6 6ft Scaffold Board, 22 in Wide, Aluminum Rails with Plywood Deck
Features:
- 6-foot scaffold board with aluminum rails and plywood deck
- 22-inch wide platform for narrow and wide span aluminum scaffolding
- Compatible with 6-foot long scaffold towers; components available separately
-
Werner NSRS-72T Steel Scaffold Trap Door System for 6 ft Baker Scaffolding Towers, 74.8 in L x 32 in W
Features:
- Trap door platform provides climb-through access within the scaffold
- Anti-slip surface for secure footing
- Powder-coated steel resists weather and rust
- Fits Werner NSRS-72/NSRS-72MP 6 ft Steel Rolling Baker scaffolds
- Conforms to ANSI and OSHA standards; Structural Plywood PS 1-19
- Approx. 1100 lb load capacity (combined user and materials)
-
Werner NSRP-72-6 Scaffold Caster Locking Pins, 5 in, Set of 4
Features:
- Scaffold caster locking pins for Werner NSRS-72, NSRS-72T, NSRS-72MP, SRS-72
- Chrome/silver finish steel construction
- Sold as a 4-pack
-
Werner NSRO-72-4 18 in Scaffold Outriggers Kit, Set of 4
Features:
- Set of four 18 in outriggers for Werner 6 ft Steel Rolling Baker Style Scaffolds (NSRS-72, NSRS-72T, NSRS-72MP)
- Powder-coated steel construction for weather and rust resistance
- Easy assembly; no tools required
- Casters required and sold separately
- Conforms to ANSI and OSHA standards
-
Werner NSRO24-72-4 24 in Scaffold Outrigger Kit, Set of 4
Features:
- Fits Werner 6 ft Steel Rolling Baker Style Scaffolds: NSRS-72, NSRS-72T, NSRS-72MP
- Set of four 24 in outriggers widens scaffold footprint
- Casters required and sold separately
- Powder-coated steel construction; ANSI/OSHA compliant
- Easy assembly with no tools required
-
Werner NSRG-72 Steel Scaffold Guardrail and Toeboard System for 6ft Baker Scaffolding Towers
Features:
- Fits Werner 6 ft NSRS-72, NSRS-72T, and NSRS-72MP rolling Baker-style scaffolds
- Guardrail and toeboard kit; easy assembly with no tools required
- Powder-coated steel for weather and rust protection
- Conforms to ANSI and OSHA standards
-
Werner NSRD-72 Plywood Deck 6 ft for NSRS-72 Rolling Scaffold
Features:
- Replacement plywood deck for Werner NSRS-72 steel rolling scaffold
- Fits 6-foot scaffold platforms
- Approx. dimensions: 67.2 in L x 28.8 in H x 1.2 in W
- TSCA Title VI compliant materials
-
Werner NSRC-72-4 5in Locking Caster for 6ft Baker Scaffolding, Sold Individually
Features:
- 5-inch locking caster for Werner 6-ft Steel Rolling Baker Scaffolds NSRS-72 and NSRS-72T
- Locks for stability; unlocks and swivels for 360? mobility
- Sold individually
-
Werner FRO Rolling Outrigger Frame Scaffold, Aluminum, 72 in L x 53 in W x 5 in H
Features:
- Aluminum scaffold component for flexible installation
- Maintains stability when converting tower length or height
- Requires a scaffold brace with every frame
- Wide or narrow span tower compatibility
-
Werner ERT-W Wide End Rail and End Toeboard Assembly, Aluminum, 35.5 in Length
Features:
- For Werner stages 20 in wide or greater
- Includes wide end rail and end toeboard components
- Durable aluminum construction
- Works with stanchion posts, side guardrails, and side toeboards
-
Werner ERT-N Narrow End Rail and End Toeboard Assembly for 12 in and 14 in Stages
Features:
- End rail and end toeboard assembly for narrow stages (12 in and 14 in)
- Works with guardrails, toeboards and stanchion posts to build sided guardrail systems
- Durable aluminum construction
-
Werner BW-8 Wide Span Horizontal-Diagonal Brace Scaffold, Aluminum, 8 ft
Features:
- Aluminum construction for flexible installation
- Stabilizes wide span scaffold towers
- Compatible with narrow span components
- Components available separately
