DeWalt
Showing 281–320 of 416 resultsSorted by popularity
-
[800 Pack] DeWalt 55310-PWR 5 Pin St. .102×3/4 ZP
$62.80Features
- Pins for Concrete and Concrete Masonry (CMU)
- Gas Fasteners
- Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
- Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
-
DeWalt 08288-PWR 1 In. Wire Brush for Ansi Hole No. 7 Rebar
$13.99DeWalt 08288-PWR 1 In. Wire Brush for Ansi Hole No. 7 Rebar
-
DeWalt 08287-PWR Wire Brush for 7/8 In. Ansi Hole No. 6 Rebar
$22.99DeWalt 08287-PWR Wire Brush for 7/8 In. Ansi Hole No. 6 Rebar
-
DeWalt 08278-PWR Threaded Hole Cleaning Wire Brush – 7-7/8 In, 3/4 In [5/8 In Rod or No. 5 Rebar]
$21.99DeWalt 08278-PWR Threaded Hole Cleaning Wire Brush – 7-7/8 In, 3/4 In [5/8 In Rod or No. 5 Rebar]
-
DeWalt 08275-PWR Wire Brush for 5/8 In Ansi Hole No. 4 Rebar
$17.99DeWalt 08275-PWR Wire Brush for 5/8 In Ansi Hole No. 4 Rebar
-
-
DeWalt 08283-PWR SDS-Plus Adapter for Wire Brush
$21.99Features
- 08283-PWR is an SDS-Plus Adapter for Steel Brushes
- For Use With DeWALT Hole Cleaning Brushes
- Manufacturer: DeWalt
-
[Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer
$15.49[Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
[Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer
$13.39[Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer Drive pins with a .300″ head by Powers Fasteners have a specially designed point that allows it to properly penetrate into typical base materials for the purpose of permanently fastening a fixture to concrete, concrete block and structural steel. A plastic flute…
-
[Pack of 100] DeWalt 50096-PWR .300 Head Drive Pin 2In w-7/8In Washer
$13.79[Pack of 100] DeWalt .300 Head Drive Pin 2In w-7/8In Washer 50096-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
[Pack of 100] DeWalt 50034-PWR .300 Head Drive Pin 1 1/2 In
$6.79[Pack of 100] DeWalt .300 Head Drive Pin 1 1/2 In 50034-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
[Pack of 100] DeWalt 50032-PWR Powers .300 Head Pin 1 1/4 In.
$12.75Features
- Drive pins with a 0.300″ diameter head
- Plastic flute is mounted on the pin shank
- Fastening a fixture to concrete, concrete over steel deck, concrete masonry walls
- The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
-
[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In.
$11.50h3>[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In. Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to increase performance in…
-
[Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head
$12.50[Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to…
-
[Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head
$12.50[Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
[Pack of 50] DeWalt 7422SD1-PWR 1/2 in. X 3-3/4 in. Power-Stud Carbon Steel Wedge Expansion Anchor
$45.58Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 50] DeWalt 7413SD1-PWR 3/8 In. x 3 In. Power Stud Carbon Steel Wedge Expansion Anchor
$17.29Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
DeWalt 08132N-PWR Power foam 29Oz. [750ML]
$18.58Features
- CFC free propellant
- Class B2 Flame retardant
- Physiologically harmless when fully cured
- Contains no urea formaldehyde or PCB’s
- Does not rot or deteriorate with age
-
DeWalt 08605-PWR Pure50 20.5 Oz [610Ml] 1-1
$34.99Features
- Designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading (see performance tables for applicable temperature ranges)
-
[Pack of 50] DeWalt 7420SD1-PWR 1/2 X 2-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor
$36.99Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 50] DeWalt 7416SD1-PWR 3/8 X 5 Power-Stud Plus SD1 Wedge Expansion Anchor
$26.65Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 50] DeWalt 7414SD1-PWR 3/8 X 3-1/2 Power-Stud Plus SD1 Wedge Expansion Anchor
$24.50Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 50] DeWalt 7412SD1-PWR 3/8 X 2-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor
$17.79Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 50] DeWalt 7410SD1-PWR 3/8 X 2-1/4 Power-Stud Plus SD1 Wedge Expansion Anchor
$16.99Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
[Pack of 100] Dewalt 7402SD1-PWR 1/4 X 2-1/4 Power-Stud Plus SD1 Wedge Expansion Anchor
$22.35Features
- Structural connections, i.e., bean and column anchorage
- Safety related attachments
- Interior applications / low level corrosion environment
- Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers
- Seismic and wind loading
-
Dewalt 03797-PWR Spike Forming 3/16 X 2 3/4
$47.96Features
- 03797-PWR offer a Pre-expanded anchor design which allows for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
Dewalt 05523-PWR Spike Carbon Mh 1/4 X 1 1/4
$25.59Features
- 05523-PWR offers a pre-expanded anchor design allowing for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
-
DEWALT 03794-PWR Spike Forming 1/4 X 2-3/4
$59.99Features
- 03794-PWR offers a pre-expanded anchor design, which allows for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
Dewalt DFM12724B Ultracon+ Hwh 1/4 X 2-1/4
$19.15Features
- DFM12724B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
DEWALT DFM12722B Ultracon+ Hwh 1/4 X 1-3/4
$14.20Features
- DFM12722B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Dewalt DFM12728B Ultracon+ Hwh 1/4 X 3-1/4
$19.95Features
- DFM12728B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
[Pack of 100] Dewalt DFM12728 DEWALT Ultracon+ Hwh 1/4 X 3-1/4
$18.99Features
- DFM12728 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Dewalt DFM12720B Ultracon+ Hwh 1/4 X 1-1/4-Blue
$14.49Features
- DFM12720B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Dewalt DCS389X2 Flexvolt 60V Max Brushless Cordless Reciprocating Saw Kit
$629.99Features
- Keyless lever-action blade clamp for quick and easy blade changes
- Variable-speed trigger allows user to instantly control speed
- Pivoting shoe provides leverage for different applications
- LED helps illuminate dark jobsite work areas
- Rubber overmold grip for comfort
-
Dewalt DPG11 Cap Style Hard Hat
Price range: $11.45 through $11.72Features
- Meets ANSI Z89.1 Type 1 Class G & E Standards
- Pillowed Brow Pad.
- Nylon Crown Strap Suspensions.
- Nape Cushion on Ratchet Suspension.
- Vertical Height Adjustment.
Select Options This product has multiple variants. The options may be chosen on the product page -
[Box of 4] Dewalt DPG99 HDP Safety Glass
$25.09Features
- Exceeds ANSI Z87.1+ standards
- Adjustable nosepiece
- Dual mold rubber temples
- Glare reducing polarized lenses
- Comes with a neck cord and DEWALT carrying bag
-
[Box of 12] Dewalt DPG98 Gable Safety Glass
Price range: $5.72 through $7.28Features
- Meets ANSI Z87.1+ standards.
- Full wraparound, rugged frame design protects against debris.
- Dual Mold Rubber tipped temples keeps glass securely in place.
- Soft, rubber non-slip nosepiece provides maximum all day comfort.
- Tough, polycarbonate lens is impact resistant and 99.9% UV protection.
Select Options This product has multiple variants. The options may be chosen on the product page -
[Box of 12] Dewalt DPG95 Framework Safety Glass
Price range: $7.44 through $8.38Features
- Meets ANSI Z87.1+ standards.
- Foam Shield® lining.
- Elastic head strap provides an adjustable, secure fit.
- Double Duty® temples and elastic head strap are interchangeable with easy snap on and off.
- Tough polycarbonate lens provides impact resistance.
Select Options This product has multiple variants. The options may be chosen on the product page -
[Box of 12] Dewalt DPG94 Dominator Safety Glass
Price range: $5.25 through $5.85Features
- Meets ANSI Z87.1+ standards.
- Rubber tipped temples provide a non-slip comfortable fit.
- Full frame with larger lens provides excellent coverage.
- Integrated rubber nosepiece for longer, comfortable wear.
- Gradient lens option offers glare protection and visual clarity.
Select Options This product has multiple variants. The options may be chosen on the product page
