Simpson Strong-Tie

Simpson Strong-Tie

Price

Product Type

Applications

Show value(s)

Gauge

Brand

Length (in)

Diameter (in)

Battery

Power Source

  • Simpson Strong-Tie LU28 LU Galvanized  Face-Mount Joist Hanger for 2x8 product imageSimpson Strong-Tie LU28 LU Galvanized  Face-Mount Joist Hanger for 2x8 product image

    Simpson Strong-Tie LU28 LU Galvanized Face-Mount Joist Hanger for 2×8

    $0.94

    Features:

    • LU-series hangers are tested, load rated and code compliant
    • The LU series installs using several fastener selections with tested allowable loads
    • Precision-formed engineered for installation ease and design value
    • Seat width: 1-9/16 in.
    • Nominal joist size: 2×8, 2×10
    Simpson Strong-tie LU28 Product Page
    Add To CartLoading Done
  • LRU26Z

    [25 Pack] Simpson Strong-Tie LRU26Z LRUZ ZMAX Galvanized Slopeable Light Rafter U Hanger for 2×6

    $5.19

    Features

    • The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
    • May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
    • May be sloped up from 0° to 45°.
    • Can be installed using nails or Strong-Drive SD Connector screws.
    Add To CartLoading Done
  • LUS28ZLUS28Z

    Simpson Strong-Tie LUS28Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×8

    $1.89

    Features:

    • LUS28Z offers patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: 2×8 and 2×10
    Add To CartLoading Done
  • H2.5AZH2.5AZ

    Simpson Strong-Tie H2.5AZ H2.5A 18-Gauge ZMAX Galvanized Hurricane Tie

    $0.65

    Features:

    • Embossments in bend line strengthen connection
    • H2.5AZ top flange features an arrow line indicator to aid correct installation
    • Made from 18-gauge steel
    • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
    Add To CartLoading Done
  • MAB15ZMAB15Z

    Simpson Strong-Tie MAB15Z MAB 13-1/8 in. ZMAX Galvanized Mudsill Anchor

    $1.13

    Features:

    • MAB15Z anchors mudsill to concrete block, poured walls or slab foundations
    • Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
    • Made from 18-gauge steel
    • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
    Add To CartLoading Done
  • APLH24APLH24

    Simpson Strong-Tie APLH24 Outdoor Accents ZMAX, Black Light Joist Hanger for 2×4

    $3.39

    Features

    • APLH24 is 14 gauge
    • ZMAX galvanized with black powder coat

    Wood Connector Resources

    Add To CartLoading Done
  • H2.5ASimpson Strong-Tie H2.5A H2.5A 18-Gauge Galvanized Hurricane Tie product image

    Simpson Strong-Tie H2.5A H2.5A 18-Gauge Galvanized Hurricane Tie

    $0.52

    Features:

    • Embossments in bend line strengthen connection
    • The top flange features an arrow line indicator to aid correct installation
    • Made from 18-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Simpson Strong-tie H2.5A Product Page
    Add To CartLoading Done
  • HETA24Simpson Strong-Tie HETA24 HETA 24 in. Galvanized Heavy Embedded Truss Anchor product image

    Simpson Strong-Tie HETA24 HETA 24 in. Galvanized Heavy Embedded Truss Anchor

    $4.07

    Features:

    • An indented embedment line ensures accurate embedment depth
    • The HETA24 is compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
    • Load rated for wind and seismic forces
    • 20-in. exposed length
    • Embed 4 in. into a poured concrete bond beam or grouted block wall
    Add To CartLoading Done
  • AT3G10AT-3G

    Simpson Strong-Tie AT3G10 High-Strength Hybrid Acrylic Adhesive

    $18.00

    Features

    • AT3G10 offers excellent for use in cold weather conditions or applications where fast cure is required
    • Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
    • Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
    • Base material installation temperatures down to 0°F (-18°C)
    • Use in grout-filled CMU construction
    Add To CartLoading Done
  • H10AH10A

    Simpsons Strong-Tie H10A 18-Gauge Galvanized Hurricane Tie

    $2.74

    Features

    • Enhanced Stiffness
    • Easy Installation
    • H10A is made from 18-gauge steel for reliable strength
    Add To CartLoading Done
  • MP24Simpson Strong-Tie MP24 MP 2 in. x 4 in. 20-Gauge Galvanized Mending Plate product image

    Simpson Strong-Tie MP24 MP 2 in. x 4 in. 20-Gauge Galvanized Mending Plate

    $0.74

    Features:

    • MP24 is versatile and easy-to-use mending plate for wood-to-wood connections
    • These non-structural connectors are ideal for general fix-up work
    • Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
    • Used for non-structural applications only (not for truss applications)
    • Width: 2 in.

     

    Add To CartLoading Done
  • THA418THA418

    THA418 17-1/2 in. Galvanized Adjustable Hanger for 4x Floor Truss

    $5.79

    Features:

    • THA418 offers extra-long straps for height adjustability and top-flange installation
    • Zinc Galvanized, G90 Finish
    • Top-flange or face-mount installation

    Wood Construction Connectors Resources

    Add To CartLoading Done
  • APLH24RSimpson Strong-Tie APLH24R Concealed-Flange Light Joist Hanger product image

    Simpson Strong-Tie APLH24R Concealed-Flange Light Joist Hanger

    $3.39

    Features

    • APLH24R offers a concealed-flange design
    • Easy installation
    • Durable & strong
    • Corrosion-resistant finish
    Add To CartLoading Done
  • APLH26APLH26

    Simpson Strong-Tie APLH26 Concealed-Flange Light Joist Hanger

    $4.09

    Features

    • APLH26 offers a concealed-flange design
    • Durable & Corrosion-Resistant
    • Easy Installation
    • Strong structural support
    Add To CartLoading Done
  • BP 3/8-2BP 3/8-2

    Simpson Strong-Tie BP 3/8-2 BP 2 in. x 2 in. Bearing Plate with 3/8 in. Bolt Dia.

    $0.96

    Features:

    • Bolt diameter: 3/8 in.
    • Dimensions: 2 in. x 2 in.
    • BP 3/8-2 is made from 3/16 in. steel
    • Uncoated steel construction

     

    Add To CartLoading Done
  • APHH46RSimpson Strong-Tie APHH46R Concealed-Flange Heavy Joist Hanger product image

    Simpson Strong-Tie APHH46R Concealed-Flange Heavy Joist Hanger

    $23.49

    Features

    • APHH46R offers heavy-duty strength
    • Concealed Flanges
    • Durable Construction
    • Corrosion-Resistant
    Add To CartLoading Done
  • APDMW56Simpson Strong-Tie APDMW56 Decorative Washer product image

    Simpson Strong-Tie APDMW56 Decorative Washer

    $2.69

    Features

    • APDMW56 enhances wood connections
    • Durable & corrosion resistant
    • Versatile use
    • Patented design
    Add To CartLoading Done
  • LRU26ZSimpson Strong-Tie LRU26Z LRUZ ZMAX Galvanized Slopeable Light Rafter U Hanger for 2x6 product image

    Simpson Strong-Tie LRU26Z LRUZ ZMAX Galvanized Slopeable Light Rafter U Hanger for 2×6

    $5.29

    Features

    • Adjustable slope
    • Open U-shape design
    • Optimized fastener placement
    • Versatile fastening options
    • LRU26Z is field installable
    Add To CartLoading Done
  • APVKB45-4Simpson Strong-Tie APVKB45-4 Decorative Knee Brace Connector product image

    Simpson Strong-Tie APVKB45-4 Decorative Knee Brace Connector

    $8.09

    Features

    • Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
    • Easily attaches knee braces to posts or beams
    • APVKB45-4 adds decorative flair to knee brace connections
    Add To CartLoading Done
  • APLH26RAPLH26R

    Simpson Strong-Tie APLH26R Outdoor Accents ZMAX, Black Light Joist Hanger for 2×6 Rough

    $4.09

    Features

    • Clean design
    • Durable construction
    • Easy installation
    • APLH26R is made to be corrosion-resistant
    Add To CartLoading Done
  • APVA21Simpson Strong-Tie APVA21 [90° Angle] product image

    Simpson Strong-Tie APVA21 [90° Angle]

    $1.99

    Features

    • APVA21 provides strong 90° support
    • Decorative design
    • Durable construction
    • Corrosion Resistant
    Add To CartLoading Done
  • STN22-R24Simpson Strong-Tie STN22-R24 Outdoor Accents Hex-Head Washer 24 count pack product image

    Simpson Strong-Tie STN22-R24 Outdoor Accents Hex-Head Washer 24 count pack

    $43.29

    Features

    • Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
    • Easy to install
    • STN22-R24 is code listed in IAPMO-UES ER-192
    Add To CartLoading Done
  • h8z ri-scaled - Simpson Strong-Tie H8 H8 18-Gauge
  Galvanized Hurricane Tie

    Simpson Strong-Tie H8 H8 18-Gauge Galvanized Hurricane Tie

    $0.87

    Features:

    • Great for connecting 2x deck joists on top of a perpendicular beam
    • Install in pairs on either side of the rafter/truss/joist to provide resistance to uplift and lateral forces
    • Use also for a variety of connections where one member crosses another
    • Made from 18-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Simpson Strong-tie H8 Product Page
    Add To CartLoading Done
  • FPBS44Simpson Strong-Tie FPBS44 E-Z Spike Black Powder-Coated Post-Base Spike for 4x4 product image

    Simpson Strong-Tie FPBS44 E-Z Spike Black Powder-Coated Post-Base Spike for 4×4

    $31.49

    Features

    • Black powder-coated steel construction for reliable strength and decorative finish
    • FPBS44 is approved for installation with the Strong-Drive SDS Connector screw
    Add To CartLoading Done
  • Simpson Strong-Tie MSTA24 MSTA 24-in.
  18-Gauge Galvanized Medium Strap Tie product imageSimpson Strong-Tie MSTA24 MSTA 24-in.
  18-Gauge Galvanized Medium Strap Tie product image

    Simpson Strong-Tie MSTA24 MSTA 24-in. 18-Gauge Galvanized Medium Strap Tie

    $2.13

    Features:

    • Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
    • Loads have been increased for wind and seismic forces
    • Floor-to-floor clear span application
    • For use on the edge of 2x members
    • Length: 24 in.
    Simpson Strong-tie MSTA24 Product Page
    Add To CartLoading Done
  • APVT6Simpson Strong-Tie APVT6 T Strap product image

    Simpson Strong-Tie APVT6 T Strap

    $20.99

    Features

    • APVT6 offers a strong 90° connection
    • Durable Steel Construction
    • Easy Installation
    • Versatile Application
    Add To CartLoading Done
  • APLH210Simpson Strong-Tie APLH210 Concealed-Flange Light Joist Hanger product image

    Simpson Strong-Tie APLH210 Concealed-Flange Light Joist Hanger

    $5.59

    Features

    • APLH210 offers a strong & reliable connection to beams
    • Durable construction
    • Corrosion resistant finish
    Add To CartLoading Done
  • APVA6APVA6

    Simpson Strong-Tie APVA6 Outdoor Accents Avant Collection ZMAX , Black Powder-Coated 90° Angle for 6x

    $9.39

    Features

    • The Avant Collection features straight edges and chamfered corners for a clean, timeless design
    • APVA6 is stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
    • Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
    Add To CartLoading Done
  • APHH46APHH46

    Simpson Strong-Tie APHH46 Outdoor Accents ZMAX, Black Heavy Joist Hanger for 4×6

    $23.49

    Features

    • Strong & Durable
    • Decorative & Functional
    • Secure Connection
    • APHH46 is coated with Zmax for corrosion resistance.
    Add To CartLoading Done
  • MPB88ZSimpson Strong-Tie MPB88Z MPBZ ZMAX  Galvanized Moment Post Base for 8x8 w/ SDS Screws product image

    Simpson Strong-Tie MPB88Z MPBZ ZMAX Galvanized Moment Post Base for 8×8 w/ SDS Screws

    $249.31

    Features:

    • Tabs inside the MPBZ provide the code-required 1 in. post standoff to help prevent rot from standing water and ground moisture
    • Stamped indicators and internal tabs identify the required concrete embedment depth
    • Strategically placed holes simplify installation to allow template attachment
    • Optional obround holes have been added for attaching trim material
    • Additional holes at the embedment line allow standing water to exit and a point of visual inspection
    Simpson Strong-tie MPB88Z Product Page
    Add To CartLoading Done
  • APLH210RAPLH210R

    Simpson Strong-Tie APLH210R Outdoor Accents ZMAX, Black Light Joist Hanger for 2×10 Rough

    $5.59

    Features

    • APLH210R is Zmax galvanized for corrosion resistance
    • Concealed flanges
    • Strong and durable
    • Easy installation
    Add To CartLoading Done
  • AT-XP Acrylic AT-XP10 10ozSimpson Strong-Tie CDT10S Manual Dispensing Tool for 10 oz. Single-Cartridge Adhesives product image

    Simpson Strong-Tie AT-XP10 AT-XP 9.4 oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    This item has been DISCONTINUED.

    • SEE AT3G10 FOR UPDATED MODEL
    Request QuoteLoading Done
  • XP30

    Simpson Strong-Tie AT-XP30 30-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    This item has been DISCONTINUED.

    • SEE AT3G30 FOR UPDATED MODEL
    Request QuoteLoading Done
  • APRTA12Simpson Strong-Tie APRTA12  Rigid Tie Angle product image

    Simpson Strong-Tie APRTA12 Rigid Tie Angle

    $2.09

    Features

    • Ideal for projects where a 90° connection is needed
    • APRTA12 fastens with #8 x 3/4″ screws (not included)
    • APRTA2 fastens with Simpson Strong-Tie Outdoor Accents 1 1/2″ connector screws (not included)
    Add To CartLoading Done
  • CB66CB66

    Simpson Strong-Tie CB66 CB Galvanized Column Base for 6×6

    $46.31

    Features:

    • CB66 features increased uplift resistance for wind or seismic loading
    • Bolt hole locations meet code-required spacing for optimal capacity
    • Nominal column size: 6×6
    • Made from 7-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Add To CartLoading Done
  • APA4APA4

    Simpson Strong-Tie APA4 90° Angle

    $4.69

    Features

    • APA4 offers enhanced strength
    • Decorative appearance
    • Versatile applications
    • Precision
    Add To CartLoading Done
  • SET3G22-NSimpson Strong-Tie  SET3G22-N 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension product image

    Simpson Strong-Tie SET3G22-N 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension

    $52.79

    Features

    • SET3G22-N is ICC-ES ESR-4057 approved for post-installed anchoring and rebar splice design
    • Includes mixing nozzle and extension for simplified installation
    • Low-odor formula, approved for potable water applications
    • Compatible with wire brush cleaning or vacuum-drill systems without extra hole cleaning
    Add To CartLoading Done
  • APB88RAPB88R

    Simpson Strong-Tie APB88R 8×8 Rough Ornamental Post Base ZMAX/PC

    $101.59

    Features

    • APB88R is building code compliant
    • 1″ standoff
    • Adjustable design
    • Versatile compatibility
    Add To CartLoading Done
  • LUS24ZLUS24Z

    Simpson Strong-Tie LUS24Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×4

    $1.08

    Features

    • LUS24Z cannot be modified
    • Works for a wide range of applications
    • Features speed prongs used to temporarily position and secure the connector for easier and faster installation
    • LUS-series hangers are tested, load rated and code compliant
    Add To CartLoading Done
  • APVB66RAPVB66R

    Simpson Strong-Tie APVB66R Adjustable Post Base

    $46.29

    Features

    • APVB66R is designed to meet stringent building codes for seismic or high-wind events
    • Slotted for adjustability
    • Features 1″ standoff to help prevent rot at post end
    • Outdoor Accents side plates available (see APVBDSP)
    • Fastener holes are slightly offset to help prevent fastener interference
    Add To CartLoading Done