Norton Clipper
Showing 41–57 of 57 resultsSorted by popularity
-
Norton 14 In. x 1/8 In. x 1 In.-20 mm Clipper Classic Concrete Cut-Off Wheel C 24 T B T01/41
$6.99Features:
- Sharp coarse grit silicon carbide grain for asphalt, green concrete, asphalt over concrete, abrasive blocks, mortar and other abrasive materials
- Constructed with two full layers of reinforcing for lower-power machines, and light to medium applications where speed of cut is a primary selection criterion
- Patented Universal Arbor will allow a single blade to be run on saws with either 1 in. or 20mm arbors
- A good mix of value and consistent performance when initial price is another primary purchasing consideration
Minimum order quantity: 10Order in multiples of: 10 -
Norton 4-1/2 x .045 x 7/8 In. Clipper Classic Cut-Off Wheel A 60 Q B T01/41
$0.99Features:
- Quality aluminum oxide abrasive and all-purpose bond provide consistent performance on a wide range of materials including 400 series stainless, and hard and soft carbon steels
- Ultra-thin reinforced straight wheel for cutting-off only applications on right angle grinder where minimum material loss is desired
- Full fiberglass reinforcement for straight, stable cuts
- Provides a good value; performance and economical initial price point are ideal for end user who needs to get the job done
Minimum order quantity: 25Order in multiples of: 25 -
Norton 14 In. x 1/8 In. x 1 In.-20 mm Clipper Classic Cut-Off Wheel A 24 T T01/41
$6.99Features:
- Market leading cutting speed now with an advanced aluminum oxide blend with more cutting points per unit area
- Up to twice the life and aggressive feel with a new active tough bond technology
- Versatile choice for cutting rebar, structural steel, pipe and sheet metal including hard and soft carbon steel and 400 series stainless
- First to market universal arbor allows a single blade to be run on saws with a 1 in. or 20mm arbor
Minimum order quantity: 10Order in multiples of: 10 -
Norton 12 In. x 1/8 In. x 1 In.-20 mm Clipper Classic Cut-Off Wheel A 24 T T01/41
$4.99Features:
- Market leading cutting speed now with an advanced aluminum oxide blend with more cutting points per unit area
- Up to twice the life and aggressive feel with a new active tough bond technology
- Versatile choice for cutting rebar, structural steel, pipe and sheet metal including hard and soft carbon steel and 400 series stainless
- First to market universal arbor allows a single blade to be run on saws with a 1 in. or 20mm arbor
Minimum order quantity: 10Order in multiples of: 10 -
Norton 4-1/2 x 1/4 x 5/8-11 In. Clipper Classic Concrete Grinding Wheel C 24 Q B T27
$2.99Features:
- Sharp silicon carbide grain for penetration of very hard, non-metallic materials
- 1/4 inch thick depressed center wheel designed to be used at a 30 degree angle on a right angle grinder for offhand stock removal, smoothing welds ,and beveling on the bottom/face of the wheel
- Our ideal blend of wheel strength and smooth bond provide a good mix of cut rate and life
- Low initial price point is ideal for end user unable to measure performance
Minimum order quantity: 10Order in multiples of: 10 -
Norton 7 x 3/32 x 5/8 In. Clipper Classic Circular Saw Cut-Off Wheel A 24 T T01/41
$2.99Features:
- Quality aluminum oxide for cutting all metals especially 300 and 400 series stainless, and hard and soft carbon steels
- Constructed with full fiberglass reinforcing for strength and stable cutting action
- DM (Diamond Mount) pop-out and 5/8 inch center hole combination to fit all popular circular saws
- A good mix of value and consistent performance for general purpose circular saw applications when initial price is a primary purchasing consideration
Minimum order quantity: 25Order in multiples of: 25 -
Norton 4-1/2 x .045 x 7/8 In. Clipper Charger Cut-Off Wheel A 36 Q T01/41
$1.99Features:
- Premium aluminum oxide grain and high-performance bond deliver fast cut and excellent wheel life
- Ultra-thin reinforced straight wheel for cutting-off only applications on right angle grinder for maximum cut rate with minimum kerf loss; ideal when precise, thin cut is desired
- Full fiberglass reinforcement for straight, stable cuts
- Ideal for cutting 400 series stainless, and hard and soft carbon steels
Minimum order quantity: 25Order in multiples of: 25 -
Norton 4-1/2 x 5/8-11 In. Bear-Tex Rapid Strip Non-Woven Disc SC XC Grit T27
$14.99Features:
- Sharp silicon carbide abrasive provides fast aggressive cutting action
- Open web construction for minimal loading; great alternative to wire brushes
- Advanced resin bond prevents shedding, snagging, gouging, and rework
- Extra coarse grit for removing parting lines and rust, and stripping coatings on aluminum, cast iron, concrete, fiberglass, composites, carbon steels, masonry, and natural stone
Minimum order quantity: 10Order in multiples of: 10 -
Norton 4-1/2 x 1/4 x 7/8 In. BlueFire Grinding Wheel ZA 24 S T27
$4.99Features:
- A blend of the most advanced zirconia alumina and premium aluminum oxide abrasives delivers 2 to 3 times the life of aluminum oxide wheels
- 1/4 inch thick depressed center wheel designed to be used at a 30 degree angle on a right angle grinder for light- to heavy-duty grinding on the bottom/face of the wheel
- Broad utility; from light-to heavy-pressure applications
- Excellent blend of performance and price on a wide range of materials, including 400 series stainless, hard carbon steels, and soft carbon steels
Minimum order quantity: 25Order in multiples of: 25 -
Norton 12 In. x 1/8 In. x 1 In.-20 mm Gemini Concrete Cut-Off Wheel C 24 T T01/41
$5.99Features:
- Sharp, coarse grit silicon carbide abrasive provides a economical cost solution for cutting brick, block, concrete on high-speed saws
- Available in two specifications: one for higher horsepower machines where additional durability is needed, and one for lower horsepower machines with a free cutting action
- The new patent pending Universal Arbor will allow a single blade to be run on saws with either 1 in or 20mm arbors
- Good choice for customers who are looking for alternative to a diamond blade
Minimum order quantity: 10Order in multiples of: 10 -
Norton 7 x 1/8 x DM 5/8 In. Masonry Circular Saw Cut-Off Wheel C 24 T T01/41
$2.99Features:
- Sharp coarse silicon carbide abrasive blend for fast cutting and long life on l masonry materials such as concrete, brick and asphalt circular saw applications
- Constructed with full fiberglass reinforcing for strength and stable cutting action
- DM (Diamond Mount) pop-out and 5/8 inch center hole combination to fit all popular circular saws
- A good mix of value and consistent performance for general purpose circular saw applications when initial price is a primary purchasing consideration
Minimum order quantity: 25Order in multiples of: 25 -
Norton 8 x 0.475 In. Clipper Charger Segmented Rim Core Bit
$424.99Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
Norton 7 x 0.475 In. Clipper Charger Segmented Rim Core Bit
$341.99Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
Norton 6 x 0.475 In. Clipper Charger Segmented Rim Core Bit
$249.99Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
Norton 5 x 0.475 In. Clipper Charger Segmented Rim Core Bit
$247.99Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
Norton 4.5 x 0.475 In. Clipper Charger Segmented Rim Core Bit
$225.99Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
Norton 4 x 0.475 In. Clipper Charger Segmented Rim Core Bit
$187.99Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
