Showing 41–80 of 370 resultsSorted by popularity
-
23% OFF
Features
- DeWalt DCK4050M2 Combo Kit
- DCD805: 40% more power versus the DCD796B using DCB205 battery or DCBP034 DEWALT POWERSTACK battery (sold separately)
- DCF850: Brushless motor that delivers up to 1,825 in-lb of torque and 3,250 rpm for driving large-diameter screws
- DCS356: The DUAL-GRIP variable-speed trigger and 3-speed selector provide ultimate speed and application control, and the bright LED illuminates dark workspaces.
- DCS382: FAST CUTS: Rapidly saw through various materials with 1-1/8 in. stroke length
-
60% OFF
Features
- 3.0 joules of impact energy provides corded power without the cord.
- Optimized ergonomic design provides excellent control in all orientations
- Durable three mode German engineered mechanism
- Wide optimal drilling range between 1/4 in. and 3/4 in.
- Factory-set clutch reduces sudden, high-torque reactions if bit jams.
- Optimized ergonomic design provides an exceptional drilling and chipping experience in overhead, horizontal and downward orientations.
- Constant speed under load for fast speed of application
-
40% OFF
Features
- 13 Amp motor
- 9000 rpm no-load speed for applications with 6 in. grinder wheels
- Brake engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2 in. x 1/4 in. bonded abrasive wheel, non-hubbed)
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off
- E-CLUTCH® activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
- Up to 30% more power vs the DCG414 Grinder
-
31% OFF
![DeWalt DCLE34035D1 20V Max 360 Degree Remote Control Laser Kit [2.0 Ah] product image](https://www.heydensupply.com/wp-content/uploads/2024/10/DCLE340_thmbwb-600x600.jpg "DCLE340_thmbwb")
Features
- DCLE34035D1 features 9 hours of runtime per charge
- Remote-controlled operation
- Up to 260 ft. visible range
- Quick-head adjustment
- Drop alert detection
-
16% OFF
$3,089.48 Original price was: $3,089.48.$2,580.31Current price is: $2,580.31.
Features:
- Replaces RB441T
- Fastest Tying Speed
- Cost Saving – Uses Less Wire!
- Short Tie Height
- Easy Wire Loading
- Easy Handling
- Built To Last
-
$599.00
Features:
- All-in-one 360° three-plane leveling and alignment with one horizontal and two vertical green-beam lines
- Power flexibility: runs on included 12V Max Li-ion battery or AA batteries (adapter included)
- Bluetooth connectivity for remote setup and brightness control via Bosch Leveling Remote App
- IP65-rated housing with rubber overmold and grip base for jobsite durability
- Range up to 100 ft (330 ft with receiver) and ±1/8 in accuracy at 30 ft
- Smart Pendulum self-levels, indicates out-of-level, and locks for transport
- Includes battery, charger, DK20 ceiling clip, magnetic L-bracket, target plate, AA adapter, and hard case
-
$3,755.57
- Tie up to #14 x #14 with 19ga wire
- Up to 4,100 ties per charge
- Uses 19 gauge TW1061T series wire
-
13% OFF
$2,427.99 Original price was: $2,427.99.$2,123.99Current price is: $2,123.99.
Features
- DCE210D2 has a compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotaing head to obtain optimal press angle
- Bright LED illumination of entire press location
- Compatible with Tool Connect software
DeWalt DCE214K 1/4″ to 7/8″ Compact NIBCO Press ACR Press Jaw Kit
-
$284.99
Features
- The Power of Corded with the Flexibility of cordless
- 4X The Runtime of DCB201 1.5Ah Battery
- 3X The Power of DC9096 18V Battery
- Tri-Platform compatibility with 20V MAX*, 60V MAX* and 120V MAX*
- Durable construction with single piece cell holder
-
$363.99
Features
- Reduce noise disturbances with up to 57% quieter operation
- Industry’s highest rated max torque hydraulic impact driver
- Up to 40% faster driving – drive large screws quickly and finish jobs fast.
- The new DCF870E1 provides consistent performance in demanding applications and performs in cold temperatures
- Complete framing, cabinetry, and other applications in tight areas with an ergonomic design
-
$388.99
Features
- Bright Led Control Screen
- lift-load capacity of up to 265 lbs. MAX
- Versatile Performance
- Built-In Pressure Sensor
- Audio Alarm
-
$630.99
Features
- Secondary Foregrip Trigger
- Larger Cut Capacity for More Variety in Applicable Materials
- Powerful Brushless Motor
- Integrated Blade Guard
- Variable Speed Trigger and Dial
-
16% OFF
$686.99 Original price was: $686.99.$577.07Current price is: $577.07.
Features
- PRO200SG2C2K is offers self-locking depth adjustment for consistent fastener drive depth
- Lightweight G3 extension for better ergonomics
- Powerful DeWalt cordless driver motor
- The collated strips are also pointed on the inserted end to simplify loading
Fastening System Resources
-
$698.99
Features
- Makita-built brushless motor provides power equivalent to a 30cc gas string trimmer
- Automatic Torque Drive Technology mode automatically shifts from 4,000-6,000 RPM for extended run time or added power
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
$158.99
Features
- Compact size ideal for precision trimming and edging
- 2-tools-in-1: 180º rotating head allows the trimmer to convert to edger
- Telescoping shaft (48-1/4” to 56-1/2”) for optimum cutting position
- Adjustable 5-position pivoting head for cutting angle adjustment when trimming in tight spaces
- Makita-built motor delivers 7,800 RPM for faster cutting
-
$448.99
Features
- The Dewalt DCF403D1 features a brushless motor delivers up to 2,100 lb of pulling force for fastening rivets, including those made of stainless steel
- 800 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/32″, 1/8″, 5/32″, and 3/16″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-
$600.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver powerful grinding and up to 60% faster cutting speed than predecessor models
- X-LOCK quick change system allows for tool-free wheel changes with simple snap-on mounting and pull release lever for change-out
- Electronic current limiter helps protect the motor from overload in high torque application
- Variable speed control dial allows for RPM adjustment (3,000-8,500) to match the speed to the application
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
-
Features
- 19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load
- The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
- The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 – #14 rebar dowel applications and dry coring up to 6 in.
-
$1,008.99
Features
- 6.1 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH ® System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load.
- System reduces vibration felt by the user at the handles, compared to rotary hammers without thsis feature.
- The light weight design makes it ideally suited for horizontal drilling for #3 – #6 rebar dowel applications and dry coring up to 3 in.
-
$478.99
Features
- Drives up to 700 finish nails using a fully charged 40V XGT® 4.0Ah battery (battery not included)
- Quiet Series designed with low noise emission at only 68 dB; ideal for indoor use
- Lightest weight cordless compressor in its class; up to 10 lbs. lighter*
- Up to 20% faster refill time from empty to full*
- Drives up to 1,400 finish nails using a fully charged 40V XGT® 8.0Ah battery (battery not included)
-
![[Tool Only] Dewalt DCS312B XTREME 12V MAX Brushless One-Handed Cordless Reciprocating Saw product image](https://www.heydensupply.com/wp-content/uploads/2023/03/53E7350F-979E-48F6-A1C0-3196AE0C38E4_7-600x600.jpg)
$177.99
Features
- Lightweight and compact for ultimate portability
- Ergonomics optimized for one-handed use
- Brushless motor for enhanced performance and extended life
- LED to help illuminate dark workspaces
- Variable-speed trigger provides user with improved speed control
-
$192.99
Features
- Powerful motor delivers up to 740 CFM on high setting
- Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
- Designed for reduced wind noise level for quiet operation at only 52 dB
- Oscillates 45º right and left
- Up to 14 hours of continuous run time in Low speed with 18V LXT® 6.0Ah Battery BL1860B (battery not included)
-
$201.99
Features
- Powerful motor delivers up to 740 CFM on high setting
- Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
- Automatically oscillates 45º right and left
- Manually tilts 90º up and 45º down for convenient redirection of airflow
- 3-stage automatic timer with 1, 2, and 4 hour power-off selection
-
![XMT035 18V LXT Lithium‑Ion Cordless Oscillating Multi‑Tool Kit [3.0Ah] product image](https://www.heydensupply.com/wp-content/uploads/2023/03/c210e018-9a16-4846-bb2f-4f1f484fa5b9_xmt035_a_1500px-600x600.jpg)
$474.99
Features
- 18V LXT® Lithium-Ion battery provides up to 20 minutes of continuous run time
- Variable speed control dial (6,000-20,000 OPM) enables user to match the speed to the application
- 3.2° oscillation angle engineered for faster, more aggressive cutting and sanding
- Large on/off slide switch with lock-on button for operator convenience
- Includes adapters to fit most competitive accessories
-
- This item has been DISCONTINUED. – SEE DCS367P1 FOR UPDATED MODEL
-
Features
- Up to 100 minutes of run time with two 18V LXT® 5.0Ah batteries (batteries sold separately)
- Powered by (1) 18V LXT® battery with the option to insert (1) additional battery for extended run time (batteries sold separately)
- Makita-built brushless motor for optimal performance
- 290 lbs. maximum load capacity
- Steel bucket provides 3 cu. ft. capacity
-
Features
- Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- Brushless motor delivers 3,600 Max RPM and 1,600 in.lbs. of Max Torque
- 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
- Additional one-touch 4-speed power selector button under the chuck for added convenience
- Assist Mode (A-mode) feature helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins
-
$155.99
Features
- 2-mode operation: delivers 750 lumens on High mode or 450 lumens on Low mode
- Up to 10 hours of continuous illumination with a 6.0Ah 18V LXT® battery on High mode (battery and charger not included)
- Up to 20 hours of continuous illumination with a 6.0Ah 18V LXT® battery on Low mode (battery and charger not included)
- L.E.D. lights effectively illuminate work area without the high heat of halogens
- Adjusting knobs enable the user to direct the flood light to desired angle
-
![XFD13SM1 18V LXT Lithium‑Ion Brushless Cordless 1/2in Driver‑Drill Kit [4.0Ah] product image](https://www.heydensupply.com/wp-content/uploads/2022/12/7a411df4-3e27-4905-acab-6051f848f1f0_xfd13m_p_1500px-600x600.jpg)
$210.99
Features
- Mechanical 2-speed transmission (0-500 & 0-1,900 RPM) for a wide range of drilling and fastening applications
- Makita-built brushless motor delivers 440 in.lbs. of Max Torque
- Weighs only 3.6 lbs. with battery for reduced operator fatigue
- Built-in dual L.E.D. lights with afterglow illuminate the work area
- 3-year limited warranty on tool, battery and charger
-
![[Tool Only] Dewalt DCG412B 20V MAX Lithium Ion 4 1/2 in. Cut-Off Tool product image](https://www.heydensupply.com/wp-content/uploads/2022/12/ec5858ec-9fff-429c-bc97-705e86c64eba-600x600.jpg "ec5858ec-9fff-429c-bc97-705e86c64eba")
$168.99
Features
- Cordless angle grinder delivers 8,000-RPM for high-power cutting and grinding applications
- Quick-change™ wheel release allows for tool free wheel changes without the need for a wrench
- Tool-free guard allows for quick, easy guard adjustments/positioning
- 2-finger trigger switch with lock-off button for convenient activation and easier gripping
- 2-position side handle provides greater control, comfort and versatility when in use
- 20-volt rechargeable battery required (battery and charger sold separately)
- 2-position side handle offers greater control, comfort and versatility
-
19% OFF
![GBU01M1 40V max XGT Brushless Cordless Blower Kit [4.0Ah] product image](https://www.heydensupply.com/wp-content/uploads/2022/09/Makita-GBU01M1-Action-Shot-blowing-grass-2-600x600.jpg "Makita GBU01M1 Action Shot (blowing grass 2)")
$518.17 Original price was: $518.17.$421.01Current price is: $421.01.
Features
- Brushless motor delivers up to 565 CFM and 143 MPH
- Up to 35 minutes of run time with 40V XGT? 4.0Ah battery
- Cruise control lever with variable speed trigger adjusts between 0 – 476 CFM
- 3-stage telescoping long nozzle
- Speed lock for convenient and continuous operation
-
$3,275.79
Features:
- Cuts #5 (5/8″) Grade 60 Rebar
- No burrs, sparks, or excessive vibration
- Lightweight & Portable
- Electric Hydraulic System Delivers smooth, effortless operation
- Durable Construction to withstand demanding jobsite conditions
-
Features:
- 5 times faster than manual tying
- Lightweight and compact body for easy maneuvering and one handed operation
- Li-ion battery can complete 2600 ties per charge
- Ties approximately 120 times per coil.
- Brushless twisting motor
-
$4,158.51
FEATURES
- REDUCES BACK STRAIN – The RB401T-E is an ergonomic solution for backbreaking slab work.
- ADJUSTABLE HANDLES – Users can adjust the handles to 2 positions, to find the most comfortable fit for their height.
- TRIGGERLESS TECHNOLOGY – An automatic contact mechanism (Pat. Pending) allows the tool to instantly tie when pushed down over a rebar intersection.
- SHORTER TIE HEIGHT (Pat. Pending) – A Wire Bending Mechanism produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
- ENCLOSED DESIGN – Greater protection against debris and moisure entering the tool.
- QUICKLY & EASILY LOAD TIE WIRE – Rapidly load the dual wire coil with the quick load magazine design.
-
19% OFF
Features:
- 18V 5Ah Battery Fully Charged in 45 Minutes with Dual Port Rapid Charger Included
- Includes 4 Batteries
- Only 13.9lbs and Zero Emissions
- Low maintenance, no gas/oil mixes, no pull starts
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
- Integrated water delivery system continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications
-
The RB518 is a battery operated rebar tying tool that can tie #5 x #5 to #7 x #8 rebar. You will save time, save money and increase productivity with this handy cordless tool. MAX Re-Bar-Tiers are also proven to reduce the risk of developing musculoskeletal diseases.
