LIMITED TIME OFFERS

BLACK FRIDAY DEALS

CLICK HERE TO SHOP SAVINGS

HUGE SAVINGS

BLACK FRIDAY DEALS

CLICK HERE

50

  • Max TW898 21 gauge rebar tie wireMax tw898 tie wire

    [50 Rolls] MAX TW898 21 Gauge Rebar Tie Wire for RB397 RB398 RB517 and RB518 rebar tiers only – 50 Roll Case

    $313.75

    Features

    • 21 Gauge Steel Tie Wire
    • Bare steel with no coating
    • For use with MAX RB397, RB398, RB517 and RB518
    Add To CartDone
  • DIAB50 Simpson drop-in anchor

    Simpson Strong-Tie DIAB50 DIAB Drop-In Internally Threaded Anchor for 1/2-in. Rod

    $0.43

    Features:

    • Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
    • Positive-set marking system indicates when anchor is properly set
    • Zinc-plated carbon steel
    • Length: 2 in.
    • Drill bit diameter: 5/8 in.
    Simpson Strong-tie DIAB50 Product Page
    Minimum order quantity: 50
    Order in multiples of: 50
    Add To CartDone
  • THDC25200H6SS[50 Pack] Simpson Strong-Tie THDC25200H6SS Titen HD 1/4 in. x 2 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THDC25200H6SS Titen HD 1/4 in. x 2 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $179.09

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDC25200H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD50234RHTHD50234RH

    [50 Pack] Simpson Strong-Tie THD50234RH Titen HD 3/8 in. x 2-3/4 in. Threaded Rod Hanger for 1/2-in. Rod

    $93.08

    Features

    • Installs with standard-sized sockets
    • THD50234RH is code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
    • FM listed
    Add To CartDone
  • New Product
    32% OFF Max TW898 21 gauge rebar tie wireMax tw898 tie wire

    MAX TW898 21 Gauge Rebar Tie Wire Repackaged Rolls Full Case of 50 OPEN BOX

    Original price was: $313.75.Current price is: $214.79.

    Features

    • 21 Gauge Steel Tie Wire
    • Bare steel with no coating
    • For use with MAX RB397, RB398, RB517 and RB518
    Add To CartDone
  • THD37212CSTHD37212CS

    [50 Pack] Simpson Strong-Tie THD37212CS Titen HD 3/8 in. x 2-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $62.17

    Features

    • THD37212CS is tested in accordance with ACI 355.2, AC193 and AC106
    • Standard fractional sizes, hole size same as anchor size
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    Add To CartDone
  • THDC25238H6SSTHDC25238H6SS

    [50 Pack] Simpson Strong-Tie THDC25238H6SS Titen HD 1/4 in. x 2-3/8 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $183.25

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDC25238H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • 6% OFF THDB37158RHTHDB37158RH

    [50 Pack] Simpson Strong-Tie THDB37158RH Titen HD 1/4 in. x 1-5/8 in. Threaded Rod Hanger for 3/8-in. Rod

    Original price was: $64.92.Current price is: $61.02.

    Features

    • Designed to install using a rotary hammer or hammer drill with standard ANSI drill bits — no special tools required
    • THDB37158RH is code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
    • FM listed
    Add To CartDone
  • TW898-USA Buy America Rebar Tie Wire made in the USATW898-USA-TIE-WIRE

    [50 Rolls] MAX TW898-USA 21 Gauge Rebar Tie Wire made from Buy America Steel

    $400.67

    Features

    • Wire steel is melted, annealed and drawn in the U.S.A
    • Steel mill certification available
    • For use with MAX RB397, RB398, RB517 and RB518
    Add To CartDone
  • 3PBSimpson Strong-Tie 3PB Quick-Lock Pier Boot product image

    Simpson Strong-Tie 3PB Quick-Lock Pier Boot

    $235.69

    Features

    • Quick and easy installation
    • 3PB is made of durable noncorrosive plastic
    • No tools required
    Add To CartDone
  • THD37400CSTHD37400CS

    [50 Pack] Simpson Strong-Tie THD37400CS Titen HD 3/8 in. x 4 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $61.84

    Features

    • THD37400CS offers superior performance
    • Removable design
    • Reduced cam-out
    • Countersunk head profile
    Add To CartDone
  • THD37300CS[50 Pack] Simpson Strong-Tie THD37300CS Titen HD 3/8 in. x 3 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THD37300CS Titen HD 3/8 in. x 3 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $72.26

    Features

    • THD37300CS is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Countersunk head allows screw anchor applications incompatible with a hex head
    Add To CartDone
  • THDB25412CS[50 Pack] Simpson Strong-Tie THDB25412CS Titen HD 1/4 in. x 4-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THDB25412CS Titen HD 1/4 in. x 4-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $56.28

    Features

    • THDB25412CS is tested in accordance with ACI 355.2, AC193 and AC106
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head

    TITEN HD

    Add To CartDone
  • THD37600HMGTHD37600HMG

    [50 Pack] Simpson Strong-Tie THD37600HMG Titen HD 3/8 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $188.46

    Features

    • THD37600HMG is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37500HTHD37500H

    [50 Pack] Simpson Strong-Tie THD37500H Titen HD 3/8 in. x 5 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor

    $346.15

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THD37500H is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37300H4SSTHD37300H4SS

    [50 Pack] Simpson Strong-Tie THD37300H4SS Titen HD 3/8 in. x 3 in. Type 304 Stainless-Steel Heavy-Duty Screw Anchor

    $223.08

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THD37300H4SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37500HTHD37500H

    [50 Pack] Simpson Strong-Tie THD37500H Titen HD 3/8 in. x 5 in. Heavy-Duty Screw Anchor

    $95.38

    Features

    • THD37500H is tested in accordance with ACI 355.2, AC193 and AC106
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • Max TW898-PC poly coated tie wire

    [50 Rolls] MAX TW898-PC Poly Coated 21 Gauge Rebar Tie Wire

    Features

    • 21 Gauge Steel Tie Wire
    • Bare steel with no coating
    • For use with MAX RB397, RB398, RB517 and RB518
    Request QuoteDone
  • Bosch DSB1003B Daredevil Standard Spade Bits, 3/8 in x 6 in, 1/4 in Hex Shank, Pack of 50 product imageBosch DSB1003B Daredevil Standard Spade Bits, 3/8 in x 6 in, 1/4 in Hex Shank, Pack of 50 product image

    Bosch DSB1003B Daredevil Standard Spade Bits, 3/8 in x 6 in, 1/4 in Hex Shank, Pack of 50

    $3.25

    Features:

    • 50-piece 3/8 in. x 6 in. Daredevil standard spade bits
    • Fully threaded tip pulls the bit through wood for fast drilling
    • Contoured paddle design for quicker chip evacuation
    • Spur-and-reamer tips help deliver cleaner holes with reduced blowout
    • 1/4 in. hex shank for use with corded or cordless drills
    Add To CartDone
  • Bosch DSB1005B Daredevil Standard Spade Bit, 1/2 in x 6 in, 1/4 in Hex Shank, Pack of 50 product imageBosch DSB1005B Daredevil Standard Spade Bit, 1/2 in x 6 in, 1/4 in Hex Shank, Pack of 50 product image

    Bosch DSB1005B Daredevil Standard Spade Bit, 1/2 in x 6 in, 1/4 in Hex Shank, Pack of 50

    $5.95

    Features:

    • Speed drilling up to 10X faster than conventional spade bits
    • Fully threaded tip pulls the bit through wood for fast starts
    • Contoured paddle design for quicker chip removal
    • Spur-and-reamer tips for cleaner hole entry and reduced blowout
    • 1/4 in. hex shank for use with corded and cordless drills
    Add To CartDone
  • Bosch DSB1007B Daredevil Standard Spade Bits, 5/8 in x 6 in, 1/4 in Shank, Pack of 50 product imageBosch DSB1007B Daredevil Standard Spade Bits, 5/8 in x 6 in, 1/4 in Shank, Pack of 50 product image

    Bosch DSB1007B Daredevil Standard Spade Bits, 5/8 in x 6 in, 1/4 in Shank, Pack of 50

    $3.35

    Features:

    • Daredevil Standard Spade Bits for extra-clean results
    • Speed drilling up to 10X faster than conventional spade bits
    • Fully threaded tip pulls the bit through wood for fast drilling
    • Contoured paddle design for faster chip removal
    • Spur-and-reamer tips pre-cut wood for cleaner holes
    Add To CartDone
  • 302-0500M

    PIP 302-0500M ANSI Type R Class 2 Two-Tone Eleven Pocket Mesh Surveyors Vest

    $532.99

    Features

    • Breathable polyester mesh
    • 2″ two-tone tape for optimum visibility
    • Zipper closure
    • 2 mic tabs with reinforced stitching
    • 2 lower external flap pockets
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • 302-0500

    [Case] PIP 302-0500 ANSI Type R Class 2 Two-Tone Eleven Pocket Surveyors Vest with Solid Front and Mesh Back

    $532.99

    Features

    • Solid front and mesh back for breathability
    • 2″ two-tone tape for optimum visibility
    • Zipper closure
    • 2 mic tabs with reinforced stitching
    • 2 lower external flap pockets
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • SSSFSSSF

    [Case] PIP SSSF THORZT Sugar Free Solo Shots

    $242.99

    Features

    • Fast Rehydration: electrolytes prevent and combat dehydration quickly in hot environments
    • Rapid Muscle Recovery: critical branched-chain amino acids help to promote energy production and minimize inflammation and mus
    • On-the-Go Packaging: adding one flavored solo shot to 16 oz of water for ease of hydration
    • Proprietary electrolyte formula including Sodium, Potassium and Magnesium
    • Sugar, caffeine, and gluten free
    Select OptionsDone This product has multiple variants. The options may be chosen on the product page
  • STB2-37334STB2-37334

    [50 Pack] Simpson Strong-Tie STB2-37334 Strong-Bolt 2 — 3/8 in. x 3-3/4 in. Wedge Anchor

    $28.49

    Features

    • STB2-37334 has a chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck thickness of 2 1/2″ and 3 1/4″
    • Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
    Add To CartDone
  • 3BB3BB

    Simpson Strong-Tie 3BB Quick-Zip Bar Booster

    $249.89

    Features

    • Quick and easy installation
    • 3BB is made of durable noncorrosive plastic
    • No tools required
    Add To CartDone
  • 4-2.5IN-UBC4-2IN-UBC

    Simpson Strong-Tie 4-2IN-UBC Quick-Lock Unibar Centralizer

    $242.39

    Features

    • Quick and easy installation
    • 4-2IN-UBC is made of durable noncorrosive plastic
    • Snaps over the rebar
    Add To CartDone
  • 7422SD1-PWR7422SD1-PWR

    [Pack of 50] DeWalt 7422SD1-PWR 1/2 in. X 3-3/4 in. Power-Stud Carbon Steel Wedge Expansion Anchor

    $45.58

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 7413SD1-PWR7413SD1-PWR

    [Pack of 50] DeWalt 7413SD1-PWR 3/8 In. x 3 In. Power Stud Carbon Steel Wedge Expansion Anchor

    $17.29

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
    Add To CartDone
  • 6% OFF THD37600HTHD37600H

    [50 Pack] Simpson Strong-Tie THD37600H Titen HD 3/8 in. x 6 in. Heavy-Duty Screw Anchor

    Original price was: $106.92.Current price is: $100.50.

    Features

    • THD37600H is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Do not reuse anchor
    Add To CartDone
  • THD37600H6SSTHD37600H6SS

    [50 Pack] Simpson Strong-Tie THD37600H6SS Titen HD 3/8 in. x 6 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor

    $374.62

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THD37600H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37134HTHD37134H

    [50 Pack] Simpson Strong-Tie THD37134H Titen HD 3/8 in. x 1-3/4 in. Heavy-Duty Screw Anchor

    $40.62

    Features

    • THD37134H is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THDB25312CSTHDB25312CS

    [50 Pack] Simpson Strong-Tie THDB25312CS Titen HD 1/4 in. x 3-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    $53.42

    Features

    • THDB25312CS is tested in accordance with ACI 355.2, AC193 and AC106
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    Add To CartDone
  • THD37212HTHD37212H

    [50 Pack] Simpson Strong-Tie THD37212H Titen HD 3/8 in. x 2-1/2 in. Heavy-Duty Screw Anchor

    $45.77

    Features

    • THD37212H is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37400H6SSTHD37400H6SS

    [50 Pack] Simpson Strong-Tie THD37400H6SS Titen HD 3/8 in. x 4 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor

    $316.92

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THD37400H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THDC25300H6SSTHDC25300H6SS

    [50 Pack] Simpson Strong-Tie THDC25300H6SS Titen HD 1/4 in. x 3 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    $190.14

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THDC25300H6SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37600H4SSTHD37600H4SS

    [50 Pack] Simpson Strong-Tie THD37600H4SS Titen HD 3/8 in. x 6 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $288.46

    Features

    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • THD37600H4SS is tested in accordance with ACI355.2, AC193 and AC106
    Add To CartDone
  • THD37500HMGTHD37500HMG

    [50 Pack] Simpson Strong-Tie THD37500HMG Titen HD 3/8 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    $166.15

    Features

    • THD37500HMG is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37300H[50 Pack] Simpson Strong-Tie THD37300H Titen HD 3/8 in. x 3 in. Heavy-Duty Screw Anchor product image

    [50 Pack] Simpson Strong-Tie THD37300H Titen HD 3/8 in. x 3 in. Heavy-Duty Screw Anchor

    $59.69

    Features

    • THD37300H is tested in accordance with ACI 355.2, AC193 and AC106
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37400HTHD37400H

    [50 Pack] Simpson Strong-Tie THD37400H Titen HD 3/8 in. x 4 in. Heavy-Duty Screw Anchor

    $62.38

    Features

    • THD37400H is tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone