Showing all 40 resultsSorted by popularity
-
$158.45
Features
- THD37400CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
$144.49
Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD37300CS6SS is tested in accordance with ACI355.2, AC193 and AC106
-
$102.31
Features
- THDC25238CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
-
$174.99
Features:
- Diablo SDS-Plus 2-Cutter
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Peak Point Tip design for aggressive starts that produce clean, fast holes
- Optimized brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized four-flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
-
$20.00
Features:
- Replacement steel bolt set for Werner 5K Mega-Swivel (steel applications)
- Durable steel construction with bronze finish
- Pack of 25 for convenient maintenance and replacements
- Meets ANSI and OSHA standards
-
$117.80
Features:
- Cast-in-place receptacle for attaching A311000 EVO Anchor after concrete cures
- Pre-installed on metal decking during construction
- Includes installation components for metal decking
- Bronze finish
- Pack of 25
-
$98.00
Features:
- Cast-in-place receptacle for attaching the A311000 EVO Anchor after cure
- Designed for wood decking installations
- Includes components required for attachment to wood decking
- Meets ANSI and OSHA standards
- Permanent anchorage solution; bronze finish
-
$51.49
Features:
- Edge series bi-metal blades for all-purpose cutting
- Turbo-Teeth technology lasts up to 3X longer than standard blades
- Precision-ground teeth start sharp and stay sharper
- 6 in. length, 6/12 TPI progressive tooth pitch for wood with nails and plastics
- Bulk pack of 25 blades for high-volume use
-
$85.49
Features:
- Bi-Metal construction for all-purpose cutting
- Turbo-Teeth technology lasts up to 3X longer than standard blades
- Engineered for extreme cuts in demanding applications
- Precision-ground teeth start sharp and stay sharper
- 12 in. length with progressive 6/12 TPI for wood with nails, plastics, and more
-
$97.69
Features:
- Bi-Metal Edge blades designed for wood, plastics, steel, and construction wood
- Turbo-Teeth technology for up to 3X longer life vs. standard recip blades
- Precision-ground teeth start sharp and stay sharp
- Progressive 10/14 TPI for fast, controlled flush cuts
- 12-inch length ideal for deep and flush cutting applications
-
$108.99
Features:
- Four-cutter full-head carbide design for up to 4X life in concrete with rebar
- Centering tip enhances precision for anchoring holes
- Integrated wear mark indicates when bit is fully worn
- Variable 4-2-2 flute design pulls dust away to reduce heat and increase efficiency
- SDS-plus shank for use with SDS-plus rotary hammers
-
$86.49
Features:
- Bulldog SDS-plus design for rotary hammer drills
- Longer life in reinforced concrete with tough tungsten carbide
- 4-cutter head drills through rebar effectively
- 4-flute design for efficient dust removal
- 1/4 in diameter, 4 in working length, 6 in total length
- Pack of 25 bits
-
$69.99
Features:
- SDS-plus shank for secure, fast bit changes
- Full-head Bosch-made carbide for durability
- Bulldog Xtreme design with variable 4-2-2 flute for efficient dust removal
- Centering tip for accurate starts
- Integrated wear mark to monitor bit life
-
$19.29
Features:
- General-Purpose EDGE blades engineered for framing and versatile jobsite cutting
- Brute Carbide upgraded C3/C4 micrograin tips for impact resistance
- SpeedCoat finish reduces friction for faster, cleaner cuts
- Extra-hard steel body resists bending for accurate, true cuts
- 7-1/4 in., 24T, 5/8 in. arbor; bulk pack of 25 blades
-
$8.02
Features:
- SDS-plus Bulldog Xtreme bit for rotary hammer drills
- 1/2 in diameter, 4 in working length, 6 in total length
- Designed for drilling in concrete, reinforced concrete, hard/soft stone, and concrete block
- Flute and tip engineered for efficient drilling and durability
-
$58.23
Features:
- Engineered SDS-plus Bulldog bit for rotary hammer drills
- 4-cutter head drills through rebar effectively
- High-quality tough tungsten carbide for long life in reinforced concrete
- 4-flute design improves dust removal and drilling efficiency
- 3/16 in diameter, 4 in working length, 6 in overall; 25-pack
-
$5.57
Features:
- Fast wood drilling up to 10X faster than conventional spade bits
- Fully threaded tip pulls the bit through wood for speed
- Contoured paddle design accelerates chip removal
- Spur-and-reamer tips for cleaner hole entry and reduced blowout
- 1/4 in. shank; 1-1/4 in. diameter; 6 in. length; 25 pieces
-
Features
- Chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck thickness of 2 1/2″ and 3 1/4″
- Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
-
$3.09
Features
- DuPont Kevlar Material
- ANSI/ISEA 105 Cut Level A2
- Full Arm Cut Protection
- Lightweight, Heat and Flame Resistant
- 1-Ply
-
$2.79
Features
- DuPont Kevlar Material
- ANSI/ISEA 105 Cut Level A2
- Full Arm Cut Protection
- Lightweight, Heat and Flame Resistant
- 1-Ply
-
Features
- THDC25300CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- Countersunk head allows screw anchor applications incompatible with a hex head
-
$155.77
Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD50300H4SS is tested in accordance with ACI355.2, AC193 and AC106
-
$48.85
Features
- THD50300H is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$126.75
Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THDC25400CS6SS is tested in accordance with ACI355.2, AC193 and AC106
-
$201.92
Features
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- THD50300H6SS is tested in accordance with ACI355.2, AC193 and AC106
-
![[25 Pack] Simpson Strong-Tie THD37212CS6SS Titen HD 3/8 in. x 2-1/2 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor product image](https://www.heydensupply.com/wp-content/uploads/2023/01/25-Pack-Simpson-Strong-Tie-THD37212CS6SS-Titen-HD-38-in.-x-2-12-in.-Type-316-SS-Countersunk-Head-Heavy-Duty-Screw-Anchor-7-600x600.jpg "[25-Pack]-Simpson-Strong-Tie-THD37212CS6SS-Titen-HD-38-in.-x-2-12-in.-Type-316-SS-Countersunk-Head-Heavy-Duty-Screw-Anchor-(7)")
$128.02
Features
- THD37212CS6SS is tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
-
$50.95
Features
- THD50300HC25 is tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$133.59
Features:
- Diablo Rebar Demon™ SDS-Plus 4-Cutter Full Carbide Head Hammer Bit
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity
-
$74.60
Features:
- Diablo Rebar Demon™ SDS-Plus 4-Cutter Full Carbide Head Hammer Bit
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity
-
$81.28
Features:
- Diablo Rebar Demon™ SDS-Plus 4-Cutter Full Carbide Head Hammer Bit
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity
-
9% OFF
$169.89 Original price was: $169.89.$154.59Current price is: $154.59.
Features:
- Diablo Rebar Demon™ SDS-Plus 4-Cutter Full Carbide Head Hammer Bit
- Diablo DMAPL4160-P25 made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity
-
$128.49
Features:
- Diablo SDS-Plus 2-Cutter
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Peak Point Tip design for aggressive starts that produce clean, fast holes
- Optimized brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized four-flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
-
$74.99
Features:
- Diablo SDS-Plus 2-Cutter
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Peak Point Tip design for aggressive starts that produce clean, fast holes
- Optimized brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized four-flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
-
$71.19
Features:
- Diablo SDS-Plus 2-Cutter
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Peak Point Tip design for aggressive starts that produce clean, fast holes
- Optimized brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized four-flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
-
$2.99
Features:
- One wheel for all materials
- No lost time due to wheel changing
- DM (Diamond Mount) pop-out and 5/8 inch center hole combination to fit all popular circular saws
- A good mix of value and consistent performance for general purpose circular saw applications when initial price is a primary purchasing consideration
Minimum order quantity: 25
Order in multiples of: 25
-
$0.99
Features:
- Quality aluminum oxide abrasive and all-purpose bond provide consistent performance on a wide range of materials including 400 series stainless, and hard and soft carbon steels
- Ultra-thin reinforced straight wheel for cutting-off only applications on right angle grinder where minimum material loss is desired
- Full fiberglass reinforcement for straight, stable cuts
- Provides a good value; performance and economical initial price point are ideal for end user who needs to get the job done
Minimum order quantity: 25
Order in multiples of: 25
-
$2.99
Features:
- Quality aluminum oxide for cutting all metals especially 300 and 400 series stainless, and hard and soft carbon steels
- Constructed with full fiberglass reinforcing for strength and stable cutting action
- DM (Diamond Mount) pop-out and 5/8 inch center hole combination to fit all popular circular saws
- A good mix of value and consistent performance for general purpose circular saw applications when initial price is a primary purchasing consideration
Minimum order quantity: 25
Order in multiples of: 25
-
$1.99
Features:
- Premium aluminum oxide grain and high-performance bond deliver fast cut and excellent wheel life
- Ultra-thin reinforced straight wheel for cutting-off only applications on right angle grinder for maximum cut rate with minimum kerf loss; ideal when precise, thin cut is desired
- Full fiberglass reinforcement for straight, stable cuts
- Ideal for cutting 400 series stainless, and hard and soft carbon steels
Minimum order quantity: 25
Order in multiples of: 25
-
$4.99
Features:
- A blend of the most advanced zirconia alumina and premium aluminum oxide abrasives delivers 2 to 3 times the life of aluminum oxide wheels
- 1/4 inch thick depressed center wheel designed to be used at a 30 degree angle on a right angle grinder for light- to heavy-duty grinding on the bottom/face of the wheel
- Broad utility; from light-to heavy-pressure applications
- Excellent blend of performance and price on a wide range of materials, including 400 series stainless, hard carbon steels, and soft carbon steels
Minimum order quantity: 25
Order in multiples of: 25
-
$5.99
Features:
- Sharp, coarse grit silicon carbide abrasive provides a economical cost solution for cutting brick, block, concrete on high-speed saws
- Available in two specifications: one for higher horsepower machines where additional durability is needed, and one for lower horsepower machines with a free cutting action
- The new patent pending Universal Arbor will allow a single blade to be run on saws with either 1 in or 20mm arbors
- Good choice for customers who are looking for alternative to a diamond blade
Minimum order quantity: 10
Order in multiples of: 10
