Showing 81–120 of 263 resultsSorted by popularity
-
$169.30
Features:
- Complete basic fall protection kit for construction and maintenance
- Includes BaseWear pass-through buckle harness
- 6-foot SoftCoil lanyard for shock absorption
- Web cross arm strap provides basic anchorage
- Packed in a durable, waterproof bucket
-
$369.90
Features:
- Complete fall protection kit for roofing applications
- Easy to install and use across a range of roof pitches
- Includes BaseWear harness with tongue buckle leg straps
- Reusable roof anchor and manual rope grab with 3 ft shock-absorbing lanyard
- 100 ft Poly-dac vertical lifeline
- Packaged in a durable duffel bag
-
$215.60
Features:
- Complete roofing fall protection kit for code compliance
- BaseWear harness with tongue buckle leg straps
- Reusable plated steel roof anchor
- 50 ft Poly-dac vertical lifeline with manual rope grab
- Integrated 3 ft shock-absorbing lanyard
- Packaged in a waterproof bucket for easy transport and storage
-
$209.10
Features:
- Complete roofing safety kit with harness, lifeline, anchor, and rope adjuster
- 30 ft Poly-dac rope lifeline with manual rope grab and 3 ft shock-absorbing lanyard
- BaseWear harness with tongue buckle leg straps; reusable steel roof anchor
- Easy to install across a range of roof pitches
- Packaged in a waterproof bucket for durability and storage
-
$201.20
Features:
- Complete fall protection kit for roofing applications
- BaseWear harness with pass-through buckle leg straps
- Reusable steel roof anchor and manual rope grab
- 50 ft Poly-dac vertical lifeline with integrated 3 ft shock-absorbing lanyard
- Packaged in a waterproof bucket for easy transport and storage
-
$194.20
Features:
- Complete fall-protection kit for roofing compliance
- BaseWear harness with pass-through buckle leg straps
- Reusable plated steel roof anchor
- 30 ft Poly-dac lifeline with manual rope grab
- Integrated 3 ft shock-absorbing lanyard
- Packed in a durable waterproof bucket
-
$69.00
Features:
- Back D-ring with sliding adjustment for secure anchorage
- Quick-connect chest buckle and tongue buckle leg straps
- Impact indicators and label protector for easier inspection
- Five-point adjustments for an XXL fit
- Bright blue/yellow webbing for visibility
-
$86.00
Features:
- Built-in Relief Handles for gravity override position after fall arrest
- Sliding rear dorsal D-ring with adjustable pad
- Hip D-rings for positioning; chest D-ring for climbing
- Slotted pass-through chest buckle; tongue buckle leg straps
- 5-point adjustments; bright colors for visibility
- Meets ANSI Z359.11-2021; OSHA 1910.140 & 1926.502
-
$81.00
Features:
- Built-in Relief Handles for Gravity Override after fall arrest
- Multiple impact indicators simplify inspection
- Sliding back D-ring; hip D-rings for positioning; chest D-ring for climbing
- Slotted pass-through buckles on chest and legs to prevent twisting
- 5-point adjustments for optimal fit; bright blue/yellow webbing
- Meets ANSI Z359.11 and OSHA 1910.140/1926.502
-
$84.00
Features:
- Built-in Relief Handles help achieve Chair in the Air position to reduce suspension trauma risk
- 5-point adjustments for an optimal fit
- Quick-Connect chest buckle and tongue-buckle leg straps
- Foam padding on back and shoulders for comfort
- Sliding rear dorsal D-ring made of high-strength alloy steel
- Bright colors enhance jobsite visibility
- Meets ANSI Z359.11 and OSHA 1910.140/1926.502
-
$174.00
Features:
- Back and shoulder D-rings for retrieval and confined space applications
- Relief Handles help achieve Gravity Override position
- WebAlert inspectable webbing with multiple impact indicators
- Quick Connect chest and leg buckles for fast, secure fit
- 5-point adjustments; lightweight padding for comfort and visibility
- Meets ANSI Z359.11; OSHA 1910.140 and 1926.502
-
$150.00
Features:
- Back and front D-rings for climbing applications
- Built-in Relief Handles for gravity override position
- WebAlert inspectable webbing with impact indicators
- Quick Connect chest buckle; Tongue buckle leg straps
- 5-point adjustments and lightweight padded design
- Bright colors for jobsite visibility
-
$357.00
Features:
- Relief Cords deploy a built-in seat to reach Gravity Override position after a fall
- Lightweight, athletic design with focused padding for comfort and airflow
- Dual back-pad system can be repositioned post-fall to reduce clavicle pressure
- WebAlert2 inspectable, weather-resistant webbing for easier inspection
- Integrated SRL bumper protects lower back; gear loops secure tool lanyards
- Quick-connect chest buckle with green engagement indicator
- Tongue-buckle leg straps; back and hip/side D-rings; tool belt
- Meets ANSI Z359.11-2021 and OSHA 1910.140/1926.502
-
Features:
- Type I, 250 lb duty rating
- Non-conductive fiberglass side rails for working around electricity
- Slip-resistant Traction-Tred D-rungs
- Alflo rung joint for Twist-Proof performance
- Interlocking side rails with smooth-operating rung locks
- SHU-LOK pivoting shoe with slip-resistant pad and spur plate
- Mar-resistant molded end caps
-
$173.00
Features:
- Arc flash rated Kevlar webbing with loop and rebar hook
- 6 ft single-leg, non-elastic shock pack energy absorbing design
- Meets ASTM F887, ANSI Z359.13 and OSHA 1926 & 1910 fall protection requirements
- Durable construction for demanding electrical environments
-
$135.70
Features:
- DCELL Shock Pack reduces fall arrest forces via controlled tearing
- Tie-back hook and high-strength webbing allow direct hook-to-webbing connection
- Twinleg design enables 100% tie-off for safe movement
- Meets ANSI Z359.13 and OSHA standards
-
$106.30
Features:
- 18 in chain for work positioning applications
- Grade 80 twist link chain for strength and durability
- Includes rebar hook and two snap hooks
- Single-leg lanyard, positioning style
-
$56.40
Features:
- Designed for work positioning and restraint; no energy absorber
- WebAlert inspectable polyester webbing for easy wear detection
- Two snap hooks, including 3/4 in standard anchorage hook
- Meets ANSI Z359.3-2019; 5,000 lb rating, 3,600 lb gate
-
Features:
- Type IAA 375 lb duty rating
- BOXLOK Interlocking fiberglass box rails reduce bounce, twist, and sway
- LeveLok ladder leveler and bracket support kit factory installed
- Slip?resistant Traction?Tred tri?rungs and rubberized V?rung
- Non?conductive rails for work near electricity
- Lightweight AERO design?about 25% lighter than standard 375 lb ladders
-
Features:
- Universal aluminum stabilizer for aluminum ladders of all duty ratings
- 47 in span with 10 in standoff for added reach and stability
- Mar-resistant rubber end caps protect work surfaces
- Paint can hook included; attaches in minutes with hardware
- Ideal for stabilizing M1 multi-ladders in scaffold or stairway positions
-
Features:
- Slip-resistant standing surface
- Durable aluminum construction
- Easily flips out of the way for safe climbing
- Rated 300 lb load capacity (evenly distributed)
- Designed for Werner MT series multi-ladders
-
$601.00
Features:
- Mobile anchorage slides along horizontal I-beams
- Fits I-beams 12?30 in wide and up to 2.5 in thick
- Lightweight aluminum construction
- Minimum Breaking Strength: 5,000 lb
- Meets ANSI and OSHA standards
-
$8.60
Features:
- Temporary anchor for concrete forms; cut off after one-time use
- Two web loops: one pass-through and one protruding from form
- 36 in length; blue polyester webbing
-
$56.90
Features:
- 8 ft anchor extension for temporary anchorage
- 1/4 in vinyl-coated galvanized cable resists harsh environments
- Includes O-ring and snap hook ends
-
Features:
- Use as a quick tie down for securing extension ladders
- Includes one LADDER-CINCH assembly, storage bag and instructions
- Strap designed for all diameter poles
- For use on fiberglass series extension ladders
-
Features:
- Functions as both a cable hook and V-rung
- For poles up to 10 in diameter
- Steel V-rung with rubber pad for slip resistance
- Includes mounting hardware and instructions
-
Features:
- Functions as both cable hook and V-rung
- For pole diameters up to 10 inches
- Steel V-rung with rubber pad for slip-resistant performance
- Includes mounting hardware and instructions
-
Features:
- Type II, 225 lb duty rating
- HolsterTop with paint/tool holder; Lock-In accessory compatible
- Slip-resistant Traction-Tred steps
- External Pinch-Proof spreaders
- EDGE molded brace and foot pads for durability
- Non-conductive fiberglass rails for work near electricity
-
Features:
- 14 in x 12 ft aluminum stage with Twist-Proof design
- 500 lb duty rating for one- or two-person use
- Slip-resistant decking minimizes material build-up
- Vinyl-coated end caps for grip and surface protection
- Ideal for ladder jack, swing stage, or catwalk applications
-
$19.99
Features:
- Extra-coarse finish from full cable knotted carbon steel wires
- Narrow face design reaches tight spaces
- Rugged, precision-balanced construction for high RPM use (up to 20,000)
- Ideal for bead weld preparation and aggressive brushing
- For small and large angle grinders with locking nut, and straight grinders
-
$22.99
Features:
- 3 in. wheel diameter with 5/8 in.-11 arbor
- Stainless steel knotted wire, single-row cup brush
- For heavy-duty cleaning on small/mini angle grinders
- Removes weld scale, burrs, and corrosion; prepares surfaces for paint
- Precision-balanced cup reduces vibration
-
$4.19
Features:
- Impact Tough design delivers up to 10X life over standard bits
- Xtended Torsion Zone absorbs torque peaks to reduce breakage
- Precision-engineered tip for better fit and less cam-out
- Heat-treated for strength and durability
- 1/4 in. external hex shank for impact drivers and drill/drivers
-
$4.29
Features:
- Impact Tough design for high durability with impact drivers
- Xtended Torsion Zone helps absorb torque peaks to reduce breakage
- Precision-engineered tip for better fit and reduced cam-out
- Heat-treated manufacturing for a stronger bit
-
$3.69
Features:
- Driven design with torsion zone built to last
- Hardened surface and precision-milled tip for better fit and less cam-out
- Heat-treated manufacturing for durability
- 1/4 in. external hex shank; 1-7/8 in. overall length
-
$16.99
Features:
- 1 in. cutting edge and 16 in. overall length
- SDS-max shank fits most SDS-max rotary and demolition hammers
- R-Tec self-sharpening design for less binding and consistent performance
- Ideal for precision concrete removal and hard surface break-up
- One-piece durable construction
-
$26.99
Features:
- Wide 1-1/2 in. cutting edge for efficient material removal
- Optimized for faster chipping and increased breakout
- Proprietary heat-treated steel for durability
- SDS-plus shank fits compatible rotary hammers and demolition hammers
- Ideal for concrete, brick, and masonry
-
$34.99
Features:
- SDS-max SpeedX rotary hammer bit for long-life drilling in reinforced concrete
- Inclined side cutters for fastest concrete drilling
- Compact head design for rapid dust removal and extended bit life
- Active-centering tip for quick, accurate starts
- Wear mark indicator helps maintain hole-diameter accuracy
-
$31.99
Features:
- High-quality tungsten carbide tip for strength and durability
- 4-cutter head drills through rebar effectively
- 4-flute design for efficient dust removal
- SDS-plus shank for secure, tool-free bit changes
- Designed for rotary hammer drills
-
$26.89
Features:
- Longer life drilling in reinforced concrete
- High-quality, tough tungsten carbide for strength and durability
- 4-cutter head drills through rebar effectively
- 4-flute design for efficient dust removal
-
$21.09
Features:
- Designed for rotary hammer drills with SDS-plus shanks
- 4-cutter carbide head drills through rebar effectively
- 4-flute design improves dust removal for faster drilling
- High-quality tungsten carbide for strength and durability
- Working length 10 in; overall length 12 in; 5/8 in diameter
