Showing 41–80 of 350 resultsSorted by popularity
-
Features
- Exposed nail tip places fastener point directly into connector holes for a fast and precise application
- In-line magazine offers balance for maneuverability
- Adjustable rafter hook allows user to hang tool on rafters and joists
- Exclusive nail management feature helps to prevent jamming (patent pending)
- Drives 1-1/2″ and 2-1/2″ STRAPSHOT™ fasteners as well as other paper tape collated metal connector nails
-
$159.99
Features
- JOB-SPECIFIC ADJUSTABILITY: Change length from 51 in. to 74 in. as you extend and rotate padded hooks 360° to fit most SUV/truck hoods
- PROTECTS SUV/TRUCK SURFACE: Anti-marring hooks designed to keep from scratching your vehicle’s paint
- VERSATILE COMPATIBILITY: Works with all 12V MAX/20V MAX/60V MAX batteries (excluding DCB615)
- FULL CONTROL of light with high, low, and single-arm modes
- EASY TRANSPORT and storage with foldable design
-
$799.00
Features
- DCMWSP650Y2 offers a high efficiency cutting system with dual blades
- 75 Minutes on runtime using both included batteries in succession**
- LED Dashboard
- Rugged, Durable Steel Deck design
- Quickly telescope and fold unit between storage and operating positions
-
$387.99
Features
- 180 Watt Hours of energy in each battery pack (360 Watt Hours combined)
- 6X the runtime compared to DCB201 1.5Ah Battery
- 9.0 Ah capacity when used in a 20V MAX* tool
- Compatible with 20V MAX*, 60V MAX* and 120V MAX* tools
- LED State of Charge Display
-
$34.49
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Features
- DeWalt DCK4050M2 Combo Kit
- DCD805: 40% more power versus the DCD796B using DCB205 battery or DCBP034 DEWALT POWERSTACK battery (sold separately)
- DCF850: Brushless motor that delivers up to 1,825 in-lb of torque and 3,250 rpm for driving large-diameter screws
- DCS356: The DUAL-GRIP variable-speed trigger and 3-speed selector provide ultimate speed and application control, and the bright LED illuminates dark workspaces.
- DCS382: FAST CUTS: Rapidly saw through various materials with 1-1/8 in. stroke length
-
Features
- DISCONTINUED, REPLACED with DCE512B
- Wide-range, variable speed control
- Multiple hanging options, free-standing, hang hooks, tripod-mount and wall-mount
-
Features
- DISCONTINUED – SEE DCS692X2 FOR UPDATED MODEL
- Cuts up to 25.5 ft. of 1 in. scoring in cure concrete per charge
- 3-1/4 in. depth of cut for single pass in pavestones, rebar cutting, and concrete scoring
- Heavy-load indicator light provides power and runtime feedback during demanding applications
- 5-position rotatable guard for approach angle selection, allowing for optimal visibility and accessibility when cutting in tight spaces
- Dual-sided water feed system offers an OSHA Table 1 Compliant solution for dust management when cutting concrete
-
$20.99
Features
- DW5952 features a fully hardened steel body delivers increased life and durability
- For light chipping and chiseling of tile, mortar, glazing compounds, and other masonry products
- Scaling chisel (wide chisel) is used for removing tile, concrete splatter, and other excess material
- Manufactured by DEWALT
-
$2,499.99
Features
- DCE210D2K features a compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotating head to obtain optimal press angle
- Bright LED illumination of entire press location
- Tool Connect software to automatically track tools and equipment
-
$18.99
Features
- Smooth swing with balanced design for enhanced utility
- DWHT51001 features a 5x More durable grip* for secure, anti-slip handling in a range of worksite settings
- Built for long life: durable, one-piece steel construction and matte black finish with thick, heat-treated steel shaft
-
$599.00
Features
- LED Work Light with 20 second delay
- Tool less blade changing lever loosens blade tension for easy blade changes
- Variable Speed for versatility and control
- 5″ Cutting Capacity
-
4% OFF
$164.99 Original price was: $164.99.$158.39Current price is: $158.39.
Features
- DCC020IB features three power sources for on the go [20V MAX battery, 12V DC, or 110V AC]
- Convenient onboard accessory storage
- Heavy-duty rubber feet help reduce walking when in use
- Threaded chuck for secure connection to inflation valve
- High-pressure inflation mode with automatic shutoff
DCCO20IB Instruction Manual
-
$347.99
Features
- Simultaneous Charger: All Ports Charge At The Same Time
- Charges 12V MAX*, 20V MAX*, and FLEXVOLT® 20V/60V MAX* Batteries
- 8 Amps Output Per Port (simultaneously)
- Charges (4) DCB204 battery in 40 mins
- Side Brackets To Mount Onto The ToughSystem™ Rails
-
Features
- CLOSEOUT ITEM LIMITED STOCK AT THIS PRICE
- 360-Degree Handle For Multiple Orientation Use
- Powerful Brightness at 2,000-Lumen Output
- Natural Daylight Hue
- IP54 Rated – Water and Dust Ingress Protection
- Compact and lightweight at only 3-lbs. (tool only)
- Tripod Mountable – 5/8-in-11 and 1/4-in-20
-
$5.49
Features
- Premium abrasive cloth provides up to 15 X longer life than fiber resin metal sanding discs
- Type 29 fiberglass backing provides grinding angle of 20-25 degrees
- Abrasive Material: Zirconia
-
$299.99
Features
- Patented auto-connect side latches
- 2-piece metal front latches for added durability
- IP65 rated for dust and water resistance
- Removeable inner tray
- Backwards compatible with any Tough System & reg; product
-
-
New Product
56% OFF
DISCONTINUED NO LONGER AVAILABLE – REPLACED BY DCN930P1
Features
- Stall release lever to reset driver blade in the event of a jam
- Adjustable rafter hook
- Easy access to the nosepiece for removal of jammed nails
- Dry fire lock out prevents tool from firing when nails are low
- 33° magazine holds up to 55 paper collated nails
-
New Product
56% OFF
DISCONTINUED NO LONGER AVAILABLE – REPLACED BY DCN930P1
Features
- Stall release lever to reset driver blade in the event of a jam
- Adjustable rafter hook
- Easy access to the nosepiece for removal of jammed nails
- Dry fire lock out prevents tool from firing when nails are low
- 33° magazine holds up to 55 paper collated nails
-
New Product
23% OFF
Features
- DeWalt DCK4050M2 Combo Kit
- DCD805: 40% more power versus the DCD796B using DCB205 battery or DCBP034 DEWALT POWERSTACK battery (sold separately)
- DCF850: Brushless motor that delivers up to 1,825 in-lb of torque and 3,250 rpm for driving large-diameter screws
- DCS356: The DUAL-GRIP variable-speed trigger and 3-speed selector provide ultimate speed and application control, and the bright LED illuminates dark workspaces.
- DCS382: FAST CUTS: Rapidly saw through various materials with 1-1/8 in. stroke length
-
New Product
40% OFF
Features
- 13 Amp motor
- 9000 rpm no-load speed for applications with 6 in. grinder wheels
- Brake engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2 in. x 1/4 in. bonded abrasive wheel, non-hubbed)
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off
- E-CLUTCH® activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
- Up to 30% more power vs the DCG414 Grinder
-
New Product
31% OFF
![DeWalt DCLE34035D1 20V Max 360 Degree Remote Control Laser Kit [2.0 Ah] product image](https://www.heydensupply.com/wp-content/uploads/2024/10/DCLE340_thmbwb-600x600.jpg "DCLE340_thmbwb")
Features
- DCLE34035D1 features 9 hours of runtime per charge
- Remote-controlled operation
- Up to 260 ft. visible range
- Quick-head adjustment
- Drop alert detection
-
$869.99
Features
- Press 1/2″ to 1″ carbon steel (black iron pipe) press fittings
- Easy actuation design optimized for one handed use
- Galvanized finish to defend against corrosion and rust build up
-
13% OFF
$2,427.99 Original price was: $2,427.99.$2,123.99Current price is: $2,123.99.
Features
- DCE210D2 has a compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotaing head to obtain optimal press angle
- Bright LED illumination of entire press location
- Compatible with Tool Connect software
DeWalt DCE214K 1/4″ to 7/8″ Compact NIBCO Press ACR Press Jaw Kit
-
$106.99
Features
- Carbide teeth for long life in material
- Ejection spring for easy plug ejection
- Raised shoulder helps prevent break through
- Optimized tooth design for fast drilling speed
- Optimized pilot bit for long life in metal
-
$73.99
Features
- Optimized Tooth Design For Fast Metal Drilling Speeds
- Ejection Spring For Easy Plug Removal
- Raised Shoulder Helps To Prevent The Drill From Breaking Through The Material When Hole Is Complete
- Thin Walled Design Provides Optimum Metal Drilling Efficiency
-
$10.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$11.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$14.99
Features
- Tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
$13.99
Features
- DWHT16860 features a tempered, carbon-steel blade with long lasting edge
- Durable construction with lacquered blade to help protect against corrosion
- Thick metal strike cap with flat surface for effective strikes
- Lightweight design with ergonomic handle for comfort and precision
- Limited Lifetime Warranty
-
Features
- DISCONTINUED – REPLACED BY DWHT56158
- DWHT56148 features a concentrated strike face for superior impact.
- Improved handle durability with overstrike protection where handles break most.
- Over-mold textured grip helps to improve comfort and control
- Durable head with forged medium-carbon steel construction
- Lightweight fiberglass handle that can withstand tough environments
-
$29.99
Features
- DWHT65103 features black chrome plating
- MAX FITtips engineered to provide better contact with fasteners
- High-durability S2 steel bar
-
$60.99
Features
- 15 Degree offset for knuckle clearance
- Long panel forging for reach and leverage
- Knurled panel rings provide a non-slip gripping surface
- Provides stamped markings for easy wrench size identification
-
9% OFF
$170.99 Original price was: $170.99.$155.99Current price is: $155.99.
Features
- 13 degree offset box end for knuckle clearance
- Increased range of arc swing in tight spaces
- DWMT19234 features DirectTorque Technology
- Full Lifetime Warranty
-
$21.99
Features
- Smooth swing with balanced design for enhanced utility
- 5x More durable grip* for secure, anti-slip handling in a range of worksite settings
- Seamless toe-nailing: Sleek, shield-shaped strike face for finish work
- Built for long life: Durable, one-piece steel construction with thick, heat-treated steel shaft
- Tri-pull technology for versatility: Remove finish nails, framing nails, and staples
-
$30.99
Features
- large milled strike face
- Balanced design with extended claw
- Remove finish nails, framing nails, and staples
- Durable, one-piece steel construction with thick, heat-treated steel shaft
- 5x more durable grip for secure, anti-slip handling in a range of worksite settings
-
$89.99
Features
- DWMT45424 is built for tight spaces – get into tight spaces with a low-profile ratchet design and a 20% thinner head
- tighten and loosen fasteners with ease with sockets featuring direct torque technology
- Professional grade durability – complete tough applications with a chrome vanadium steel construction that provides strength and durability
- Excellent maneuverability – maneuver in restricted areas with a 72-tooth ratchet that offers a 5-degree arc swing
-
$284.99
Features
- The Power of Corded with the Flexibility of cordless
- 4X The Runtime of DCB201 1.5Ah Battery
- 3X The Power of DC9096 18V Battery
- Tri-Platform compatibility with 20V MAX*, 60V MAX* and 120V MAX*
- Durable construction with single piece cell holder
-
$113.99
Features
- DWACPRIR offers 4x Faster Cuts
- Minimize Cutting Effort
- Quick-Change Brace
- Multi-Brand Compatibility
- Full-Range Cut Capacity
