Showing 81–120 of 149 resultsSorted by popularity
-
$229.00
Features:
- Powerful 13-amp motor delivering 11,500 rpm in a compact design
- KickBack Control helps shut off the tool if wheel binds
- Restart and overload protection for added safety and durability
- Soft start for smooth startups
- Anti-vibration side handle for comfort in long applications
- Lock-on paddle switch for greater control and ergonomics
- Variable-speed selection to match the application
-
$89.00
Features:
- Ergonomic design with narrow grip zone for comfort and control
- 10-amp motor delivers up to 11,000 no-load RPM
- No lock-on multi-grip paddle switch for safer operation and better handling
- Anti-vibration side handle improves comfort
- Epoxy-coated windings & double-sealed gear housing for durability
- Adjustable tool-free guard with multiple fixed positions
-
$949.00
Features:
- PROFACTOR performance with 6.3 ft.-lbs. impact energy (EPTA) for concrete demolition
- Lightweight 11.7 lbs. tool-only design for downward, horizontal and over-shoulder use
- BITURBO Brushless motor optimized for CORE18V High Power batteries
- Anti-vibration system and Vario-Lock chisel positioning
- Lock-on button for continuous operation and built-in LED worklight
- Keyless SDS-max chuck; variable speed control
- Compatible with Bosch PRO+GUARD dust solutions
-
$249.00
Features:
- PROFACTOR performance delivers wormdrive-like functionality with corded-comparable power
- Fast cutting with 5,000 RPM
- 2-5/8 in. cutting capacity for “two-by” materials
- Left blade orientation for improved line-of-cut visibility (right-handed users)
- Electronic convenience brake stops blade quickly
- Rear-handle ergonomic design for reach, balance and reduced fatigue
- 360° pivoting dust port and integrated saw hook
-
$249.00
Features:
- 8.5-amp motor delivers 2.4 Ft.-Lbs. impact energy
- KickBack Control helps stop rotation during bind-up
- Counter-balanced Vibration Control for comfort
- Vario-Lock positions chisel for optimal angle
- Variable-speed trigger with reverse for accurate starts
- D-handle design ideal for overhead/downward drilling
- Multi-function selector: drilling, hammer drilling, chiseling
- SDS-plus bit system for tool-free bit changes
-
Features:
- Impact Tough design for high-torque use with impact drivers and wrenches
- Deep well reaches fasteners in recessed or hard-to-access areas
- Hex interface fits 1/4 in. hex impact drivers
- Hardened-core manufacturing increases strength and reduces breakage
-
$249.00
Features:
- Brushless 18V combo kit with hammer drill/driver and two-in-one impact driver/wrench
- Includes two 2.0Ah Lithium-Ion batteries and 18V charger
- Impact driver/wrench delivers up to 1,800 in.-lbs torque and 0–4,200 IPM
- Hammer drill/driver features 20+1 precision clutch and upgraded metal chuck
- Built-in LED lights and Electronic Cell & Motor Protection
- Comes with belt clips and carrying bag
-
$71.00
Features:
- Starlock interface delivers secure, slip-resistant fit for pro performance
- Bi-metal edge removes tough sealants and adhesives
- Tapered design reaches tight spaces with control
- Color-coded and laser-etched for quick identification
- Compatible with Starlock and OIS multi-tools from Bosch, Fein, Milwaukee, Makita, Ridgid, and others
-
$18.19
Features:
- 1-1/2 in. cutting edge for standard chiseling and scaling
- 12 in. overall length for reach and control
- SDS-max shank for secure fit in compatible hammers
- Ideal for tile, mortar, glazing compounds, and masonry
- Designed for rotary and demolition hammers
-
$38.50
Features:
- 3/4 in. diameter, 8 in. working length, 13 in. overall
- 100% carbide, four-cutter head for long life in reinforced concrete
- Diffusion-bonding technology for up to 5X life vs. competition
- Optimized for SDS-max rotary hammer drills
- Designed to aggressively cut through hard aggregate and rebar
-
$7.49
Features:
- Four-cutter full-head carbide for up to 4X life in concrete with rebar
- Centering tip for precise anchoring-hole placement
- Integrated wear mark indicates end of life
- Variable 4-2-2 flute design clears dust to reduce heat and increase holes per charge
- SDS-plus shank fits SDS-plus rotary hammers
-
$49.97
Features:
- Brighter graphic display with intuitive icons and big-number mode
- Rounds results from 1/2 in. up to 1/32 in. at the touch of a button
- Real-time measuring automatically adjusts as you move
- Slim, compact design with full rubber overmold housing
- User-friendly two-button layout and click wheel navigation
-
$419.00
Features:
- PROFACTOR performance for breaking free stuck bolts and fast driving of large fasteners
- High-torque motor delivers up to 740 ft-lbs fastening and 1,180 ft-lbs max breakaway torque
- 3 speed settings (0-800/1,300/1,750 rpm) plus advanced preset and custom modes
- Auto Bolt Release stops rotation with no load to help prevent dropping fasteners
- BITURBO Brushless technology optimized for CORE18V High Power batteries
- Friction ring for quick socket changes; onboard UI and LED work light
- Connectivity module included to customize via Bosch PRO360 App
-
$319.00
Features:
- Legendary Bulldog performance with 1.9 Ft.-Lbs. impact energy (EPTA)
- Efficient EC Brushless motor maximizes runtime
- KickBack Control helps reduce sudden tool reactions
- D-handle design ideal for overhead, horizontal and downward drilling
- Variable-speed reversing trigger for precise starts
- SDS-plus chuck with three modes: rotary hammer, hammer only, rotation only
- Lightweight 5.8 lb tool-only with 360° side handle and LED worklight
- Includes CORE18V 4 Ah battery, charger, auxiliary handle, depth gauge, and case
-
$129.00
Features:
- 15 Amp high-output motor for fast, smooth cutting
- Die-cast magnesium footplate for durability and flatness
- 56° bevel capacity with detents at 22.5° and 45°
- Anti-snag lower guard and optimized sight lines
- Soft-grip handle, spindle lock, and 10 ft cord
-
$7.59
Features:
- Impact Tough deep well socket for hard-to-reach fasteners
- Engineered for high torque use with impact drivers and wrenches
- 1/2 in. shank with 13/16 in. drive end
- Hex interface fits 1/4 in. hex impact drivers
- Hardened-core construction to reduce breakage
-
$24.99
Features:
- 18 in. bull point chisel for precision concrete work
- Designed for SDS-max hammers
- High-quality, heat-treated hammer steel for durability
- Ideal for masonry and concrete demolition
- Single pack quantity
-
$66.99
Features:
- Ideal for roughing up stone, concrete and asphalt
- 25-tooth square head adds texture and removes excess material
- SDS-max shank for rotary hammer drills
- 12-1/2 in. overall length; 1-3/4 in. cutting head
- Durable one-piece construction
-
$49.30
Features:
- 7/8 in. diameter, 16 in. working length, 21 in. total length
- 100% carbide, four-cutter head for long life in reinforced concrete
- Diffusion-bonded design for strong durability and 5X life vs. competition
- SDS-max shank for rotary hammer drills
- Engineered for concrete, hard/soft stone, and concrete with rebar
-
$51.29
Features:
- 1/2 in. diameter, 16 in. working length, 21 in. overall length
- Four-cutter, 100% carbide head for long life in reinforced concrete
- Diffusion-bonding technology for 5X life vs. competition
- Optimized for SDS-max rotary hammers; aggressive tip design
- Suitable for concrete, hard/soft stone, and concrete with rebar
-
$38.25
Features:
- SpeedXtreme SDS-max design for rotary hammer drills
- 100% carbide, four-cutter head for long life in reinforced concrete
- Diffusion-bonding technology delivers 5X life vs. competition
- Aggressive 180° cutting diameter with 100% power transfer
- Ideal for concrete, reinforced concrete, hard and soft stone, and concrete block
-
$129.00
Features:
- Three-point plumb and level projection for level, plumb, 90° and grade points
- Bright green-beam laser up to 4X brighter than red
- VisiMax technology optimizes brightness and battery life
- Smart Pendulum self-levels, indicates out-of-level, and locks for transport
- Full rubber overmold housing and IP65 rating for durability
- Integrated magnetic multipurpose mount with 1/4-20 threading
-
$579.00
Features:
- 12V Max 360° connected green-beam three-plane leveling and alignment-line laser kit
- Bright green beam up to 4X brighter than red; working range up to 200 ft diameter
- Pulse mode extends range to 330 ft diameter with optional LR8 receiver
- VisiMax technology optimizes visibility and battery life
- Bluetooth control via free Bosch Leveling Remote App
- Dual power: Bosch 12V Max Li-ion battery or four AA batteries
- Smart Pendulum self-levels and indicates out-of-level up to ±4°; manual mode for angled lines
- IP54 jobsite-tough over-molded construction
-
$949.00
Features:
- 9 in. cutting wheel for cuts up to 3.3 in. deep
- 6-position cutting guard for multiple working angles
- Ergonomic wrap-around handle with soft grip for comfort
- Enclosed battery compartment with spring-assisted removal
- Water shut-off valve for concrete applications
- Innovative spindle lock for fast wheel changes
- Includes (2) CORE18V 12 Ah batteries and Turbo charger
-
$799.00
Features:
- PROFACTOR performance delivers corded power in an 18V SDS-max 1-9/16 in. rotary hammer
- Superior impact with 5.2 Ft.-Lbs. (EPTA) for drilling and chiseling in concrete
- BITURBO Brushless motor engineered to maximize CORE18V High Power batteries
- KickBack Control and on-tool user interface for feedback and control
- Anti-vibration main handle plus Vario-Lock, reverse, soft start and controlled rpm/bpm
- Kit includes (2) 8Ah CORE18V batteries, turbo charger, auxiliary handle, and case
-
$219.00
Features:
- Legendary Bulldog performance with lightweight D-handle design
- 1.9 ft-lbs (EPTA) impact energy for heavy-duty drilling and chipping
- EC Brushless motor maximizes runtime
- KickBack Control helps reduce sudden reaction in bind-up
- Variable-speed reversing trigger and LED worklight
- 360° side handle for multiple grip positions
- SDS-plus chuck; 0–4,350 BPM and 0–890 RPM
-
$579.00
Features:
- 1.8 Ft.-Lbs. impact energy (EPTA) for heavy-duty concrete work
- Brushless motor for maximized runtime
- KickBack Control and anti-vibration system for safer, more comfortable use
- Lightweight 8.5 lbs (with battery); 0-4,350 BPM and 0-980 RPM
- SDS-plus chuck with 1 in. max concrete capacity; three operation modes
- Integrated connectivity via Bosch app; LED worklight and 360° side handle
- Includes two CORE18V 8.0Ah batteries, charger, handle, depth gauge, and case
-
$8.54
Features:
- Impact Tough design for high-torque use
- Deep-well profile reaches fasteners in tight spaces
- Hex interface fits 1/4 in. hex impact drivers
- Hardened-core manufacturing for strength and reduced breakage
- 7/8 in. drive end with 1/2 in. shank
-
$6.34
Features:
- Impact Tough design for high-torque use
- Deep well reaches fasteners in hard-to-access spaces
- Hex interface fits 1/4 in. hex impact drivers
- Engineered and hardened core for strength and reduced breakage
- Designed for rotary drills/drivers, impact drivers, and screwdrivers
-
$3.99
Features:
- Impact Tough deep well design for hard-to-reach fasteners
- Engineered for high-torque use with impact drivers and wrenches
- 1/2 in. shank with hex interface for 1/4 in. impact drivers
- Hardened-core manufacturing for increased strength and reduced breakage
-
$5.98
Features:
- Impact Tough deep well design for hard-to-reach fasteners
- Engineered for high-torque use with impact drivers and wrenches
- 1/2 in. shank with 1/4 in. hex interface compatibility
- Hardened-core construction reduces breakage
-
$5.99
Features:
- Impact Tough design for high-torque applications
- Deep well profile reaches fasteners in tight spaces
- 1/4 in. hex interface for impact drivers
- Engineered and hardened for durability and reduced breakage
-
$5.72
Features:
- Impact Tough deep well socket for hard-to-reach hex fasteners
- Engineered for high torque use with impact drivers and wrenches
- 1/4 in. hex interface; 1/2 in. shank
- Hardened-core manufacturing for increased strength and reduced breakage
-
$5.44
Features:
- Impact Tough deep well socket for hex screws
- Engineered for high-torque use
- 1/4 in. hex interface for impact drivers
- Deep well design reaches confined spaces
- Hardened-core construction for strength and reduced breakage
-
$10.65
Features:
- Four-cutter full-head carbide for up to 4X life in concrete with rebar
- Centered tip for accurate anchoring-hole placement
- Integrated wear mark indicates end of life
- Variable 4-2-2 flute design pulls dust away to reduce heat and improve efficiency
- SDS-plus shank fits SDS-plus rotary hammers
-
$419.00
Features:
- 2-Tool 18V Combo – includes GDX18V-1860C impact driver/wrench and GSB18V-975C 1/2 in. hammer drill/driver
- Connected-ready tools – optional/app-enabled modes for control and customization via PRO360/Bosch Toolbox
- Brushless motors – deliver high efficiency and performance
- KickBack Control on drill – helps reduce injury risk in bind-ups; precision clutch with 25 settings
- Impact driver/wrench – three speeds, preset/custom modes, and Auto Bolt Release
- Includes power – (2) CORE18V 4.0Ah batteries and GAL18V-40 charger, plus bag
-
$229.00
Features:
- Powerful 13-amp motor delivers 11,500 no-load RPM in a compact design
- Brake system rapidly stops the wheel when the switch is turned off
- KickBack Control, drop control, restart and overload protection for enhanced user safety
- Variable-speed selection and soft start to match speed to application with smoother startups
- Anti-vibration side handle improves comfort during long grinding tasks
- Slide switch for easier long-run operation
-
$149.00
Features:
- High Power 6.0Ah CORE18V battery delivers 50% more runtime and over 75% more power vs. 4.0Ah CORE18V
- Dual-layer 21700 cells for greater efficiency
- Bosch CoolPack 2.0 technology for improved cooling and longer life
- Compact, 2.14 lb design with high‑resolution charge‑status indicator
- Compatible with Bosch 18V tools/chargers and AMPShare multi-brand system
-
$276.75
Features:
- Lightweight magnesium construction reduces user fatigue
- 15 Amp motor delivers power for tough cuts
- Blade-left worm drive design for clear cut-line visibility
- 53° bevel capacity with positive stop at 45°
- Anti-snag lower guard for smooth small cut-offs
- Spindle lock and large levers for quick blade and setting changes
- Built-in saw hook for convenient storage between cuts
-
$459.00
Features:
- 12.5-amp motor delivers up to 9,300 RPM for tough concrete applications
- Dedicated dust-collection guard enables flush grinding against walls
- Constant Response circuitry with soft start and overload protection
- 5/8-11 spindle fits most common accessories; spindle lock for quick wheel changes
- Sealed switch and bearings with lip-sealing rings for long life
- Wrap-around auxiliary handle and lock-on/off switch for extended use
