Showing 41–80 of 149 resultsSorted by popularity
-
$38.99
Features:
- Wide 2-1/2 in. cutting edge for efficient material removal
- 10 in. overall length for reach in demolition tasks
- SDS-plus shank for secure fit in rotary and demolition hammers
- Faster chipping design with additional wedges to increase breakout
- Proprietary heat-treat process for durability
-
$199.00
Features:
- Bluetooth 5.0 for streaming from up to 100 ft away
- 360° stereo sound with four speakers and integrated subwoofer
- Hybrid power runs on Bosch 18V Li-ion batteries or included 120V AC cord
- Four 120V AC outlets to power tools and electronics
- Rugged roll cage with aluminum/rubber protection for jobsite use
- Digital tuner with 4 AM and 4 FM presets, plus AUX input and USB charging (2.1A)
-
$129.00
Features:
- Green-beam laser up to 4X brighter than red for superior visibility
- Easy-to-read backlit color display with rounding button
- Accurate to ±1/16 in. with range up to 165 ft
- IP65-rated, full rubber overmold housing for jobsite durability
- Haptic feedback confirms measurements; add/subtract and multiple measuring functions
-
$119.00
Features:
- High-power 16A turbo charger for rapid charging
- Integrated Mode button with Power Boost and Long Life modes
- Active air-cooling with dual fans to optimize charge time
- Five-LED battery charging status indicator
- Works with Bosch 18V lithium-ion batteries and AMPShare system
-
$169.00
Features:
- Delivers 50% more runtime and over 75% more power vs. CORE18V 4 Ah
- Two layers of enhanced 21700 cells for greater efficiency
- Bosch CoolPack 2.0 technology for improved cooling and battery life
- Copper end plates, power rails, and flexible circuit board reduce resistance
- Compact operation at only 2.14 lbs with high-resolution charge indicator
- Compatible with all Bosch 18V tools/chargers and AMPShare multi-brand system
-
$929.00
Features:
- Powerful 14.5-amp motor delivers 9.3 ft.-lbs. of impact energy
- Vibration Control for maximum user comfort on all-day jobs
- Dual-mode selector switches between rotary hammer and hammer-only
- Constant Response circuitry for soft-start, constant speed under load, and overload protection
- Turbo Power provides a 20% power boost in hammer-only mode
- SDS-max bit system enables tool-free bit changes and strong impact energy transfer
-
$299.00
Features:
- Powerful 8.0-amp motor delivers 2.4 Ft.-Lbs. of impact energy
- Vibration Control in mechanism and grip for comfort during extended use
- Three modes: rotary hammer, rotation-only, and hammer-only
- Keyless SDS-plus shank accepts bits up to 1-1/8 in. diameter
- Integral clutch reduces torque reaction in bind-up
- Variable-speed trigger with reverse for accurate starts and removing fasteners
- Compact and lightweight at 12.5 in. long and 7.7 lb
-
$179.99
Features:
- 6 in. wide scraping blade with 25 in. overall length
- SDS-max shank for use with SDS-max rotary and demolition hammers
- Ideal for removing tile, mortar, glazing compounds and other masonry materials
- Designed for light chipping, chiseling and floor scraping tasks
-
$56.99
Features:
- 5 in. wide scraping blade with SDS-plus shank
- Designed for concrete and masonry demolition
- Proprietary heat-treated steel for durability
- Sharp edge for efficient material removal
- Compatible with rotary hammers and demolition hammers
-
$37.62
Features:
- SDS-max SpeedXtreme bit engineered for rotary hammer drills
- 100% carbide four-cutter head for long life in reinforced concrete
- Diffusion-bonding technology for exceptional durability
- Aggressive 180° cutting diameter with 100% power transfer
- Designed to drill through concrete, hard stone, and rebar-laden material
-
$39.98
Features:
- 3/8 in. diameter, 8 in. working length, 13 in. total length
- SDS-max shank for rotary hammer drills
- 100% carbide four-cutter head for long life in reinforced concrete
- Diffusion-bonding technology for strong head-to-steel bond
- Designed for aggressive cutting with 180° cutting diameter and 100% power transfer
-
$199.00
Features:
- Includes CORE18V 8 Ah High Power battery and BC1880 fast charger
- Delivers 50% more runtime and over 75% more power vs. CORE18V 4 Ah
- Fast charging – at least 40% faster than standard Bosch 18V chargers (with CORE18V 6 Ah)
- CoolPack 2.0 technology for improved cooling and longer battery life
- Battery weighs only 2.14 lbs with charge-status indicator
- AMPShare 18V multi-brand compatible system
-
$69.00
Features:
- Powerful 7.5 Amp motor delivers 11,000 no-load RPM
- Slim-grip design for comfortable extended use
- Durable carbon brushes for extended tool life
- Two-position side handle for better control
- Directed air flow helps divert dust from vital components
- Burst-protection guard with quick adjustment
- Service Minder brushes indicate when maintenance is required
- Large spindle lock for easy disc changes
-
$99.00
Features:
- Powerful 11-amp motor delivers 11,000 RPM
- KickBack Control helps shut off tool in a bind
- Restart and overload protection with soft start
- Anti-vibration side handle for comfort
- Adjustable tool-free guard with multiple fixed settings
- Lock-on paddle switch for greater control
-
$199.00
Features:
- 1-1/8 in. stroke length and 0–2,900 spm for fast cutting
- LockJaw toolless blade change with one‑hand insertion and spring ejection
- BITURBO Brushless motor optimized for CORE18V High Power batteries
- Variable-speed trigger and orbital mode for wood
- Ergonomic in-line design with Vibration Control and soft grip
- Adjustable, pivoting footplate with on-tool depth key storage
- Built-in rafter hook for quick hang-up between cuts
-
$125.00
Features:
- Measures up to 400 ft with ±1/16 in accuracy
- Integrated 5.0 MP camera with adjustable zoom to locate laser spot outdoors
- Bluetooth connectivity to Bosch MeasureOn app for transferring measurements
- Rechargeable 3.6V lithium-ion battery for all-day runtime
- Backlit color display with reinforced screen glass and easy display guide
- Built-in 360° inclinometer and digital bubble level
- Stores last 50 measurements and over 600 images
-
$649.00
Features:
- All-in-one 360° three-plane laser – one horizontal and two vertical green-beam chalk lines for fast setup
- Power flexibility – runs on CORE18V 4.0 Ah battery (included) or 4× C Cell alkalines (adapter included)
- Bluetooth connectivity – control settings via Bosch Leveling Remote App
- IP65 jobsite durability – dust-tight and water-resistant with full rubber overmold
- Smart Pendulum System – self-levels, indicates out-of-level, and locks for transport
- Receiver compatible – extend range up to 400 ft. (receiver sold separately)
-
$209.00
Features:
- Engineered for metal cutting with 0–4,250 no-load rpm
- Adjustable stainless steel footplate for durable, accurate cuts
- Integrated chip collector for faster cleanup
- 5-3/8 in. blade delivers 2 in. cutting capacity
- Impact-resistant clear window and LED cut-line light
- Electronic convenience brake and motor protection
- Balanced design with saw hook
- AMPShare 18V system compatible
-
$249.99
Features:
- Angled, illuminated rotating flip display for easy reading
- Displays degrees, percent, or feet/inches with hold/copy function
- Audible tone indicator at level or 90°
- Accuracy at 0° or 90°: ±0.05°; 360° tilt sensor
- Robust aluminum housing with IP54 protection; includes carry case and 4 AA batteries
-
$199.00
Features:
- Robust 15 Amp motor delivers fast cutting performance with high overload capacity
- 5 in. cutting capacity for larger ferrous metal workpieces
- Adjustable fence with miter angle provides 0–45° left cuts and three mounting locations
- 4,100 no-load RPM for smooth, accurate cuts
- Adjustable spark guard helps control spark direction for user protection
- Ergonomic, moderate 31 lb design for comfortable, ambidextrous use and easy transport
-
$319.00
Features:
- Green-beam cross-line laser with plumb points; up to 4X brighter than red
- Power flexibility: 3.7V Li‑Ion 3.0Ah battery or AA batteries (adapter included)
- IP65 dust-tight, water-resistant housing with full rubber overmold
- USB‑C fast charging, even while in use; outstanding 8‑hour runtime (Li‑Ion)
- Smart Pendulum self-levels, indicates out-of-level, and locks for transport
- Range 100 ft (330 ft with receiver); 1/8 in accuracy at 30 ft
- Fine adjustment mount with pivot rotation and 1/4-20 threading
-
$219.00
Features:
- Delivers equal power and at least 50% more runtime than CORE18V 8 Ah
- Three layers of enhanced 21700 cells for greater efficiency
- CoolPack 2.0 technology for improved cooling and longer life
- Copper end plates, power rails, and flexible PCB reduce resistance
- High‑resolution charge‑status indicator
- PROFACTOR exclusive – compatible with Bosch BITURBO tools and AMPShare 18V chargers
-
$69.00
Features:
- 12V Max Lithium-Ion battery with 3.0 Ah capacity
- Up to 50% more runtime than previous 12V Max 2.0 Ah batteries
- Lightweight design at only 0.4 lb
- Operates in cold conditions down to -4°F
- Compatible with all Bosch 12V Max tools and chargers
-
$79.00
Features:
- Best-in-class 330-lumen illumination with 10 high-intensity LEDs
- 200° articulation plus magnets, carabiner clip, 1/4 in. tripod thread, and nail hook for versatile mounting
- Up to 6 hrs runtime with 12V 2.0Ah battery; up to 12 hrs with 4.0Ah battery
- Dim function doubles runtime
- Durable reinforced-plastic housing
-
$489.00
Features:
- 5.6 ft-lbs impact energy in a 12.4 lb light, compact body
- SDS-max bit system with tool-free changes and automatic bit locking
- Vario-Lock positions chisel in 12 angles for optimal working
- Variable-speed trigger and dial with lock-on button
- 360° rotating auxiliary handle and ergonomic grip area
- Service modules allow quick brush and cord replacement
-
$19.29
Features:
- General-Purpose EDGE blades engineered for framing and versatile jobsite cutting
- Brute Carbide upgraded C3/C4 micrograin tips for impact resistance
- SpeedCoat finish reduces friction for faster, cleaner cuts
- Extra-hard steel body resists bending for accurate, true cuts
- 7-1/4 in., 24T, 5/8 in. arbor; bulk pack of 25 blades
-
$36.99
Features:
- 5-3/8 in. diameter with 30 teeth for fast, clean cutting in ferrous metals
- Brute C6 micrograin carbide tips enhance impact resistance and durability
- SpeedCoat antifriction finish for cooler cutting and less dust than bonded wheels
- Extra-hard steel blade body resists bending and deflection for accurate cuts
- 5/8 in. arbor; 0.063 in. kerf and 0.040 in. plate thickness
-
$1,199.00
Features:
- Radar technology for accurate identification of common materials
- Four object views with depth indication for metals, cables, pipes, and studs
- Leakage detection plus screenshot capture for quick documentation
- USB-C and SD card slot for fast data transfer and updates
- Spot view for small areas and corners; 3.5 in. color display
- Up to 8 in. measuring depth for metals; compatible with Bosch 12V Max batteries
-
$12.77
Features:
- 1 in. cutting edge with 18 in. overall length
- SDS-max shank for secure fit and efficient power transfer
- Standard flat chisel for light chipping and chiseling
- Effective material removal in concrete, brick, and masonry
- For use with SDS-max rotary and demolition hammers
-
$10.60
Features:
- 1 in. flat chisel for standard chiseling in concrete and brick
- 12 in. overall length for reach and control
- SDS-max shank for secure fit in SDS-max hammers
- Ideal for light chipping on tile, mortar, glazing compounds, and masonry
- Good material removal on light applications
-
$55.00
Features:
- 1 in. diameter, 8 in. working length, 13 in. total length
- Four-cutter, 100% carbide head for long life in reinforced concrete
- Diffusion-bonding technology for 5X life vs. competition
- Optimized for SDS-max rotary hammer drills
- Engineered for aggressive cutting through concrete with rebar
-
$57.95
Features:
- Long-lasting 100% carbide four-cutter head for drilling reinforced concrete
- Diffusion-bonding technology for up to 5X life vs. competition
- Four-cutter head provides 180° cutting diameter and full power transfer
- Engineered for rotary hammer drills with SDS-max shanks
- Ideal for concrete, reinforced concrete, hard and soft stone, and concrete block
-
$319.00
Features:
- Starter kit includes two CORE18V 8.0 Ah High Power batteries and a 16A Turbo Charger
- Delivers 50% more runtime and over 75% more power vs. CORE18V 4.0 Ah
- CoolPack 2.0 technology for faster cooling and longer battery life
- Power Boost mode charges compatible batteries to 50% in the shortest time
- Active air-cooling with dual fans and high-resolution charge-status indicator
- Compatible with Bosch 18V tools and AMPShare multi-brand system
-
$999.00
Features:
- Comprehensive kit with rotary laser, LR20 receiver with bracket, tripod, 13 ft grade rod, glasses, target, and hard case
- Electronic self-leveling and disturbance monitor for consistent accuracy
- Manual Dual Slope adjustment on both X- and Y-axes
- Up to 2,000 ft working range with ±1/16 in accuracy at 100 ft
- Durable design with red metal cage and jobsite-tough housing, IP56 rated
-
$229.00
Features:
- PROFACTOR performance delivers corded-like power in a 7-1/4 in. cordless saw
- 2-1/2 in. cut capacity across the full 0°–50° bevel range
- Electronic convenience brake for faster, safer repetitive cuts
- BITURBO Brushless motor optimized for CORE18V High Power batteries
- 50° bevel range with front bevel lock and auxiliary handle for control
- 360° pivoting dust port directs debris or vac hose away from the user
-
$269.00
Features:
- High power 8.0Ah CORE18V batteries delivering 50% more runtime and over 75% more power vs. 4.0Ah CORE18V
- Enhanced 21700 cells with copper end plates, power rails and flexible circuit board for efficiency
- Bosch CoolPack 2.0 for improved cooling and longer lifetime
- Compact for its class at only 2.14 lb per battery with clear charge-status indicator
- Compatible with Bosch 18V tools/chargers and AMPShare multi-brand system; optimized for PROFACTOR BITURBO tools
-
$22.89
Features:
- 3 in. cutting edge for efficient scaling and material removal
- 12 in. overall length for reach and control
- SDS-max shank for secure fit and rapid bit changes
- Ideal for light chipping, chiseling, and tile or mortar removal
- Engineered for use with SDS-max rotary and demolition hammers
-
$44.92
Features:
- SpeedXtreme durability – engineered for up to 50% more durability in tough concrete applications
- 100% carbide, four-cutter head for long life when drilling reinforced concrete and hard aggregate
- Diffusion-bonding technology delivers up to 5X life vs. competitors
- Efficient power transfer with 180° cutting diameter design
- SDS-max shank for use with rotary hammer drills
-
$48.36
Features:
- Four-cutter carbide-tipped head for hitting rebar and reducing lock-up
- Up to 2X life in concrete with rebar vs. 2-cutter bits
- Four-flute design efficiently removes dust
- SDS-plus shank fits SDS-plus rotary hammers
