Showing all 25 resultsSorted by popularity
-
New Product
Features:
- Easily secures EZ-GLIDE System roof rack to Knapheide KUV or equivalent
- Works on driver or passenger side of KUV service body
- Use with Model 2295-3-01 Single-side Drop Down and Part 70521 Handle Kit
- White powder coat finish
-
Features:
- Heavy-duty 16-gauge steel construction with fully arc-welded seams
- One-time installation lock system resists break-ins (locks not included)
- 1/4-inch solid lock tangs provide pry bar resistance
- Staked and welded hinge for durability
- Powder coat finish for corrosion protection
- Solid 7-gauge steel skids for strength and stability
- Ergonomic recessed handles with 90-degree stops
- Locking spreader secures lid open to prevent accidental closure
- Pre-punched for optional Power Pass grommet for charging tools inside
-
Features:
- 48 in W x 24 in D x 28.5 in H secure jobsite chest for tools and materials
- Heavy-duty 16 ga steel with fully arc-welded seams for durability
- Powder coat finish for corrosion resistance
- 7 ga one-piece steel skids for strength and stability
- Ergonomic recessed handles with 90° stops for leverage
- Locking spreader holds lid open and helps prevent accidental closure
- Pre-punched for Power Pass grommet for safe cord access (locks not included)
-
Features:
- Industrial-strength steel under-bed storage for trailers and flatbeds
- Four-stage automotive-grade rotary latches and push-button locks
- Weather-resistant NEMA-style enclosure
- Compatible with mounting kit 29221128 (sold separately)
-
Features:
- Set of four 6-inch casters with 2-inch-wide, non-marking polyurethane wheels
- Fits all KNAACK jobsite storage boxes
- Includes two rigid and two swivel casters with brakes
- 2,240 lb load capacity per set (including box and contents)
- Enhances mobility for tool storage chests
-
Features:
- Type IA twin stepladder rated 300 lb per side
- Dual HolsterTop with paint and tool holders
- Slip-resistant Traction-Tred steps; double-riveted and knee-braced
- Heavy-duty internal spreaders; EDGE bracing and foot pads
- Non-conductive fiberglass rails for working near electricity
-
$80.30
Features:
- Designed for assisted rescue and entry/retrieval systems
- Attaches to harness shoulder D-rings
- Integral spreader element keeps shoulder straps separated
- Durable polyester webbing with steel hardware
- Meets ANSI Z359.4 and OSHA standards
-
$334.30
Features:
- 18-foot web rescue ladder for rapid retrieval after a fall
- Simple deployment using existing or temporary anchor points
- Portable kit with ballistic nylon carrying bag
- Rugged design suited for construction environments
-
Features:
- Type IAA 375 lb duty rating
- Heavy-duty 9 in x 14 in molded top for large standing surface
- Wide 6 in steps with deep treads for slip resistance
- Stable locking spreaders that stay open
- Extra-large feet ideal for use on gratings
- Non-conductive fiberglass rails for working near electricity
-
Features:
- Attaches to base units supplied with PK70-1 and PK70-2
- For Werner ladder series D7100, D6200, 7100, D1300, 7800 (all lengths), MT-13, MT-17, MT-22, MT-26
- Swivel shoe with ice pick on both ends
- Leveler can be used on either side of the ladder
-
$114.00
Features:
- Integral 3 ft shock-absorbing lanyard with 1.75 in webbing
- Manual rope adjuster moves on vertical lifelines for continuous protection
- Attaches or removes anywhere along a lifeline
- For use on 5/8 in rope lifelines
- Minimum Breaking Strength: 5,000 lb
-
$266.50
Features:
- Three-strand, 5/8 in diameter rope lifeline for strength and durability
- Polyester?polypropylene blend offers comfortable grip and chafe protection
- Lightweight design with snap hook on one end
-
$753.00
Features:
- Complete 30 ft cable horizontal lifeline kit
- Turnbuckle with tension indicator for quick, accurate setup
- In-line energy absorber for consistent fall protection performance
- Supports up to 2 users via integrated O-rings
- Wire rope construction with snap hook end connection
- Meets OSHA regulations
-
$863.50
Features:
- 30 ft galvanized steel wire rope lifeline
- Jaw-jaw turnbuckle with tension indicator for proper setup
- Inline energy absorber for consistent fall protection
- Supports up to 2 users via O-rings with SRLs or energy-absorbing lanyards
- Includes D-Bolt anchors for quick installation
- Meets OSHA regulations
-
$870.60
Features:
- 60 ft galvanized steel wire rope lifeline
- Includes turnbuckle, fist grips, tension indicator, and snap hook
- Inline energy absorber for consistent fall protection
- Supports up to 2 users via O-rings with SRLs or energy-absorbing lanyards
- Cross-Arm Strap anchorage included; quick setup and teardown
- Meets OSHA 29 CFR 1910.140 & 1926.502
-
$824.80
Features:
- Complete 30ft cable horizontal lifeline system
- Turnbuckle, fist grips, tension indicator and snap-hook end for quick setup
- Inline energy absorber for consistent fall protection
- Supports up to 2 users via O-rings with SRLs or energy-absorbing lanyards
- Includes Cross-Arm Strap anchorage
- Meets OSHA 29 CFR 1910.140 & 1926.502
-
$37.60
Features:
- High-strength polyester
- Reinforced bottom
- Padded shoulder straps for comfort
-
$86.50
Features:
- DCELL Shock Pack reduces fall arrest forces
- High-strength polyester tie-back webbing
- Tie-back snap hook connects directly to webbing
- Acts as both connecting means and anchorage connector
- Meets ANSI Z359.13 and OSHA standards
-
$135.50
Features:
- Dual-purpose DeCoil shock pack for 12 ft free fall (310 lb) or 6 ft free fall up to 400 lb
- Single-leg polyester webbing with WebAlert for easy inspection
- Snap hook harness connection and rebar hook anchorage
- Gate strength 3,600 lb; meets ANSI and OSHA requirements
-
$101.70
Features:
- Dual-purpose DeCoil lanyard for 12 ft free fall (310 lb) or 6 ft free fall up to 400 lb
- Inspectable WebAlert polyester webbing for durability and easier inspections
- Single-leg design with snap hooks; 3/4 in standard anchorage hook
- Arrest force/distance: 1,350 lb & 60 in (12 ft FF); 1,800 lb & 48 in (400 lb use)
- Meets ANSI and OSHA requirements
-
$27.60
Features:
- Single D-ring permanent roof anchor for new construction and repairs
- Stainless steel construction with included stainless steel fasteners
- Install and leave in place for future maintenance access
- Meets OSHA and ANSI standards
-
$11.40
Features:
- Temporary concrete anchor for pour-in applications
- 2 ft length with web pass-through loop and protruding D-ring
- Disposable, cut off after one-time use
- Durable polyester webbing construction
- Meets ANSI and OSHA standards
-
Features:
- Slip-resistant rubber grip on steel V-rung for wood, metal or concrete poles
- Pre-pierced holes in fiberglass top rails for easy installation
- Includes mounting hardware and instructions
-
Features:
- Molded top provides large standing platform
- External Pinch-Proof? spreaders
- Slip-resistant Traction-Tred? steps
- Rail end shield with slip-resistant foot pads
- Braces on bottom steps; non-conductive fiberglass rails
-
$48.36
Features:
- Four-cutter carbide-tipped head for hitting rebar and reducing lock-up
- Up to 2X life in concrete with rebar vs. 2-cutter bits
- Four-flute design efficiently removes dust
- SDS-plus shank fits SDS-plus rotary hammers
