Showing 1–40 of 50 resultsSorted by popularity
-
$29.79
Features
- Stamped-in contrasting color graduations for better readability
- Extra-thick extruded aluminum body holds up to heavy-duty use, ideal for use as saw guide
- Large base helps provide better grip on materials
- Scribe line notches for marking rip cuts
-
$174.99
Features:
- Diablo SDS-Plus 2-Cutter
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Peak Point Tip design for aggressive starts that produce clean, fast holes
- Optimized brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized four-flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
-
$11.49
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Maximum performance in cordless and corded SDS-Max rotary hammers
-
$10.83
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Maximum performance in cordless and corded SDS-Max rotary hammers
-
$11.29
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Maximum performance in cordless and corded SDS-Max rotary hammers
-
$24.99
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition work, thin-set removal, cleaning concrete, and removing scale and rust
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Wide chisel design for minimal effort and time in concrete removal applications
- Maximum performance in cordless and corded SDS-Max rotary hammers
-
Features:
- Single top end cap for S7706-1 fiberglass interchangeable Parallel Sectional Ladder
- User-installed accessory for ladder protection
- Durable construction with protective top loop
- Compact and lightweight for easy handling
-
Features:
- Scaffold caster locking pins for Werner NSRS-72, NSRS-72T, NSRS-72MP, SRS-72
- Chrome/silver finish steel construction
- Sold as a 4-pack
-
Features:
- 5-inch locking caster for Werner 6-ft Steel Rolling Baker Scaffolds NSRS-72 and NSRS-72T
- Locks for stability; unlocks and swivels for 360? mobility
- Sold individually
-
$36.00
Features:
- Attaches to Werner LITEFIT harness
- Velcro straps for easy installation
- Lightweight back pad accessory
- Durable polyester construction
-
$81.20
Features:
- Cast-in-place PVC sleeve for horizontal lifeline systems
- Includes cap to prevent fresh concrete from filling sleeve
- Accepts Werner L400001 End Stanchion and L400003 Intermediate Stanchion
- 12 in length; white PVC construction
-
$179.00
Features:
- Complete fall protection compliance kit for construction and maintenance
- Includes BaseWear harness with tongue buckle leg straps
- 6 ft SoftCoil single-leg lanyard with snap hook
- Web cross arm strap (web, loop, D-ring) for basic anchorage
- Packaged in a waterproof bucket for easy transport and storage
-
$369.90
Features:
- Complete fall protection kit for roofing applications
- Easy to install and use across a range of roof pitches
- Includes BaseWear harness with tongue buckle leg straps
- Reusable roof anchor and manual rope grab with 3 ft shock-absorbing lanyard
- 100 ft Poly-dac vertical lifeline
- Packaged in a durable duffel bag
-
$215.60
Features:
- Complete roofing fall protection kit for code compliance
- BaseWear harness with tongue buckle leg straps
- Reusable plated steel roof anchor
- 50 ft Poly-dac vertical lifeline with manual rope grab
- Integrated 3 ft shock-absorbing lanyard
- Packaged in a waterproof bucket for easy transport and storage
-
$209.10
Features:
- Complete roofing safety kit with harness, lifeline, anchor, and rope adjuster
- 30 ft Poly-dac rope lifeline with manual rope grab and 3 ft shock-absorbing lanyard
- BaseWear harness with tongue buckle leg straps; reusable steel roof anchor
- Easy to install across a range of roof pitches
- Packaged in a waterproof bucket for durability and storage
-
$194.20
Features:
- Complete fall-protection kit for roofing compliance
- BaseWear harness with pass-through buckle leg straps
- Reusable plated steel roof anchor
- 30 ft Poly-dac lifeline with manual rope grab
- Integrated 3 ft shock-absorbing lanyard
- Packed in a durable waterproof bucket
-
$644.90
Features:
- Integrates with Werner ProForm SP harness with SwitchPoint technology
- 30 ft working length with descent control auto-lock and panic-override
- Lightweight ANSI-rated aluminum carabiners
- Abrasion-resistant kernmantle rope; horizontal or vertical harness attachment
- Meets ANSI Z359.4-2013(R2022)
-
$389.30
Features:
- Portable anchorage connector for underground mining and tunneling
- Installs directly inside 39 mm friction rock bolts
- Steel construction with silver finish
- Temporary anchorage; suitable for rock applications
-
$233.80
Features:
- Drop-through overhead anchorage connector with 12 in plate and 8.5 ft cable
- Rated 5,000 lb Minimum Breaking Strength
- Fits 1.75?6 in openings; attaches to concrete floors, steel girders, and grates
- 1/4 in thick steel plate with swivel ring for easy connection
- Meets ANSI Z359.18 and OSHA requirements
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75 in to 6 in openings
- 1/4 in thick steel plate with 2 ft cable and swivel ring
- Attaches to concrete floors, steel girders, and grates
- Meets ANSI and OSHA standards
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75?6 in openings
- 1/4 in thick steel plate with 1 ft cable and swivel ring
- Use on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA standards
-
$7.00
Features:
- 10,000 lb MBS Straight Loop Insert for concrete anchorage
- Pre-installed receptacle for A510022 10K Mega-Swivel anchor
- Reusable design with simple installation and plug removal
- Twice the strength rating of a concrete strap
- Pack of 100
-
$81.60
Features:
- Anodized aluminum construction
- Connects three-strand or kernmantle rope without knots or factory terminations
- Compatible with 5/8?3/4 in three-strand and 7/16?3/4 in kernmantle rope
- Minimum Breaking Strength: 5,000 lb
- Meets ANSI and OSHA standards
-
$83.90
Features:
- Fastens to underside of roof truss to provide an anchorage point
- Quick, easy fall protection solution where anchors are hard to locate
- Temporary anchor meets OSHA standards
- Minimum Breaking Strength: 1,800 lb
-
$420.90
Features:
- 3 ft roller sling anchor for bridges and pipe
- Aircraft cable with polyurethane rollers and spacers
- Minimum Breaking Strength: 5,000 lb
- Temporary anchorage; follows the user to reduce swing fall
- Meets OSHA 29 CFR 1910.140/1926.502 and ANSI/ASSP Z359.18-2017
-
Features:
- 5 in x 1.5 in locking caster for Werner aluminum scaffolds
- Rubber tread, swivel-type with two-way lock to prevent rolling and swiveling
- Fits Werner scaffold legs model 40-4SL
- Rust-resistant construction
-
Features:
- Model 36-9 wear sleeve kit for installing PK80-2 Level-Master Automatic Leveler
- Designed for D1100-2 Series extension ladders
- User-installable parts kit
-
$119.99
Features:
- 3/4 in steel vibration head
- 12 in head length
- Fits standard or pencil flexible shafts
- High-performance eccentrics; maintenance-free sealed design
- Lubricated with synthetic oil
- Made in USA; lifetime warranty
-
$97.69
Features:
- Bi-Metal Edge blades designed for wood, plastics, steel, and construction wood
- Turbo-Teeth technology for up to 3X longer life vs. standard recip blades
- Precision-ground teeth start sharp and stay sharp
- Progressive 10/14 TPI for fast, controlled flush cuts
- 12-inch length ideal for deep and flush cutting applications
-
$31.99
Features:
- High-quality tungsten carbide tip for strength and durability
- 4-cutter head drills through rebar effectively
- 4-flute design for efficient dust removal
- SDS-plus shank for secure, tool-free bit changes
- Designed for rotary hammer drills
-
$21.09
Features:
- Designed for rotary hammer drills with SDS-plus shanks
- 4-cutter carbide head drills through rebar effectively
- 4-flute design improves dust removal for faster drilling
- High-quality tungsten carbide for strength and durability
- Working length 10 in; overall length 12 in; 5/8 in diameter
-
$16.49
Features:
- Longer life drilling in reinforced concrete
- High-quality, tough tungsten carbide tip for durability
- 4-cutter head drills through rebar effectively
- 4-flute design for efficient dust removal
-
$10.60
Features:
- 1 in. flat chisel for standard chiseling in concrete and brick
- 12 in. overall length for reach and control
- SDS-max shank for secure fit in SDS-max hammers
- Ideal for light chipping on tile, mortar, glazing compounds, and masonry
- Good material removal on light applications
-
$18.19
Features:
- 1-1/2 in. cutting edge for standard chiseling and scaling
- 12 in. overall length for reach and control
- SDS-max shank for secure fit in compatible hammers
- Ideal for tile, mortar, glazing compounds, and masonry
- Designed for rotary and demolition hammers
-
$10.65
Features:
- Four-cutter full-head carbide for up to 4X life in concrete with rebar
- Centered tip for accurate anchoring-hole placement
- Integrated wear mark indicates end of life
- Variable 4-2-2 flute design pulls dust away to reduce heat and improve efficiency
- SDS-plus shank fits SDS-plus rotary hammers
-
$222.99
Features
- Powerful 15 AMP motor delivers 5,800 RPM for proven performance and job site durability)
- Electric brake for maximum productivity)
- Lower guard design improves performance when making bevel and narrow cuts)
- Large cutting capacity (2-3/8″ at 90°, 1-3/4″ at 45°))
- Two built-in L.E.D. lights illuminate the line of cut for increased accuracy)
-
$67.15
Features
- THD501200HMG is tested in accordance with ACI 355.2, AC193 and AC106
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$62.46
Features
- Versatile applications
- Low installation torque
- Removable
- THD501200H offers a zinc-plated finish for corrosion resistance
-
$12.99
Features:
- Diablo Rebar Demon™ SDS-Plus 4-Cutter Full Carbide Head Hammer Bit
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity
-
$10.29
Features:
- Diablo Rebar Demon™ SDS-Plus 4-Cutter Full Carbide Head Hammer Bit
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity
