Showing all 10 resultsSorted by popularity
-
$5.19
Features
- The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- Can be installed using nails or Strong-Drive SD Connector screws.
-
$615.00
Features:
- 50 ft working range for greater mobility
- Class 1 SRL with 24 in maximum arrest distance for overhead use
- Galvanized steel cable with swivel snap hook and steel carabiner
- Lightweight, compact housing with convenient carry handle
- ANSI Z359.14-2021 Class 1 and OSHA 1910.140/1926.502 compliant
- Durable recessed labels aid inspection; blue accent identifies overhead use
-
$439.00
Features:
- Class 1 SRL for overhead anchorage
- 30 ft galvanized steel cable with swivel snap hook
- Lightweight, compact housing with carry handle
- 24 in maximum arrest distance for low clearance
- Durable recessed labels aid inspection
- Meets ANSI Z359.14-2021 and OSHA 1910.140/1926.502
-
$1,022.00
Features:
- For use with Werner 7.5-foot aluminum stanchions to create a raised anchor point
- Mounts to vertical concrete or steel surfaces
- Heavy-duty galvanized steel construction
- Four 3/4 in mounting holes for secure installation
- Meets OSHA 1910 and 1926 requirements
-
$1,430.90
Features:
- For use with Werner 7.5-foot Aluminum Stanchions
- Mounts to horizontal concrete or steel surfaces
- Robust galvanized steel construction
- Carry handle for ease of transport
- Four 3/4 in mounting holes
- Meets OSHA 1910 and 1926
-
$568.00
Features:
- 60 ft galvanized steel wire rope with O-rings for up to 2 users
- Includes jaw-jaw turnbuckle, fist grips, and snap hook end for quick setup
- Inline energy absorber for consistent safety performance
- Meets OSHA regulations
-
$863.50
Features:
- 30 ft galvanized steel wire rope lifeline
- Jaw-jaw turnbuckle with tension indicator for proper setup
- Inline energy absorber for consistent fall protection
- Supports up to 2 users via O-rings with SRLs or energy-absorbing lanyards
- Includes D-Bolt anchors for quick installation
- Meets OSHA regulations
-
$824.80
Features:
- Complete 30ft cable horizontal lifeline system
- Turnbuckle, fist grips, tension indicator and snap-hook end for quick setup
- Inline energy absorber for consistent fall protection
- Supports up to 2 users via O-rings with SRLs or energy-absorbing lanyards
- Includes Cross-Arm Strap anchorage
- Meets OSHA 29 CFR 1910.140 & 1926.502
-
$266.00
Features:
- Corrosion-resistant galvanized steel construction
- Fastening holes for wood, concrete, or I-beam installation
- 16 in x 16 in x 3/8 in base plate for secure, permanent anchoring
- 360-degree loading direction; 5,000 lb minimum breaking strength
- Meets ANSI Z359.18-2017 and OSHA 1910.140/1926.502 requirements
-
$441.00
Features:
- Two secure connection points for fall arrest and transfer/100% tie-off
- Easily installs in minutes
- Fits round ladder rungs up to 2 in diameter; square rungs up to 2.5 in
- Strong galvanized steel construction
- Compatible with Werner harnesses; front D-ring not required
