Showing 81–120 of 193 resultsSorted by popularity
-
$9.70
Features:
- Convenient disposable roof anchor; knock down and shingle over after use
- Fits any roof pitch for versatile installation
- Includes fasteners; install five 16d nails per leg into rafters and sheathing
- Temporary roof anchorage solution for fall protection
-
$27.60
Features:
- Single D-ring permanent roof anchor for new construction and repairs
- Stainless steel construction with included stainless steel fasteners
- Install and leave in place for future maintenance access
- Meets OSHA and ANSI standards
-
$697.10
Features:
- 6 ft roller sling anchor for overhead movement
- Made with aircraft cable, rollers and spherical spacers
- Anchorage connector follows the user along bridges or around pipe
- Helps reduce swing fall when used overhead
- Meets OSHA and ANSI Z359.18 standards; 5,000 lb MBS
-
$56.90
Features:
- 8 ft anchor extension for temporary anchorage
- 1/4 in vinyl-coated galvanized cable resists harsh environments
- Includes O-ring and snap hook ends
-
$51.70
Features:
- 6 ft anchor extension with O-ring and snap hook ends
- 1/4 in vinyl-coated galvanized cable for durability
- Lightweight design stands up to harsh environments
-
$46.80
Features:
- 4 ft anchor extension with O-ring and snap hook ends
- 1/4 in vinyl-coated galvanized cable for durability
- Lightweight design for harsh environments
-
$46.30
Features:
- 3 ft anchor extension for temporary anchorage
- 1/4 in vinyl-coated galvanized cable resists harsh environments
- Ends feature O-ring and snap hook for secure connection
- Lightweight design for easy handling
-
$45.60
Features:
- Durable 1/4 in vinyl-coated galvanized cable for harsh environments
- 2 ft length ideal for anchorage extension
- O-ring and snap hook ends for secure connections
- Gray finish with robust hardware
-
$77.90
Features:
- 10 ft cable choker with pass-through O-rings
- 5/16 in vinyl-coated galvanized cable for durability
- Withstands harsh environments; ideal anchorage connector
- Gray finish
-
$71.90
Features:
- Durable 5/16 in vinyl-coated galvanized cable
- Pass-through O-ring design creates a secure anchor point
- Lightweight and built for harsh environments
- 8 ft length for versatile anchorage
- ANSI and OSHA compliant
-
$68.40
Features:
- Durable 5/16 in vinyl-coated galvanized cable
- Two O-rings pass-through design to create anchor point
- Stands up to harsh environments
- Meets ANSI and OSHA standards
-
$41.10
Features:
- 4 ft cable choker assembly without O-rings for greater application flexibility
- 5/16 in vinyl-coated galvanized aircraft cable stands up to harsh environments
- Meets ANSI and OSHA standards
- Temporary anchorage connector for general applications
-
$63.80
Features:
- Durable 5/16 in vinyl-coated galvanized cable resists harsh environments
- Pass-through O-ring design creates a secure anchor point
- 4 ft length for versatile anchorage around beams and structures
- Lightweight, gray finish
- Meets ANSI and OSHA standards
-
$61.60
Features:
- 3 ft cable choker with pass-through O-rings
- 5/16 in vinyl-coated galvanized cable for durability
- Creates a secure anchor point in harsh environments
- Gray finish
-
$59.50
Features:
- Durable 5/16 in vinyl-coated galvanized cable for harsh environments
- Pass-through design with small O-ring through large O-ring to create anchor point
- 2 ft length; gray cable with steel O-rings
- Suitable for temporary anchorage; meets ANSI and OSHA standards
-
$106.99
Features:
- Connects two Northrock flexible shafts
- Durable construction for jobsite use
- Genuine Northrock replacement part
-
13% OFF
$14.99 Original price was: $14.99.$12.99Current price is: $12.99.
Features
- 3041020 offers a tapered tri-flute design for faster chip ejection and less binding.
- faster, cleaner holes, less breakout, and extended drilling life.
- Full screw-point tip allows bit to self-feed for ease of drilling.
-
14% OFF
$128.99 Original price was: $128.99.$110.99Current price is: $110.99.
Features
- DSVG212S meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
- T25 6-lobe driver bit: BITTX25
- High-low threads with Type-17 point provides fast starts
-
$479.99
Features
- Meets ANSI Z89.1-2014 Type II Class E and CSA certified Z94.1 Type II, Class E requirements
- Compatible with 4 point chin strap 280-HP542C
- Lightweight HDPE shell made with UV stabilized High Density Polyethylene (HDPE) reduces worker fatigue
- EPS foam liner provides front, rear and lateral protection from impact and penetration
- 4-Point quick release suspension with strong textile straps and crown comfort pad provides a comfortable and secure fit
-
$313.99
Features
- Strong, lightweight HDPE Shell
- ANSI Z89.1 Type II Class E
- CSA Z94.1 Type II Class E
- EPS Liner for enhanced side, front and rear impact protection
- Sure-Lock 4 point Wheel Ratchet Suspension for a secure and comfortable fit
-
$208.99
Features
- High-Density Polyethylene (HDPE) shell with a full brim providing additional protection against sun, glare, rain and falling debris
- Extended back brim helps protect neck and ears from the sun’s UV rays, as well as a run-off for rain and snow…short front brim shades the face while allowing excellent visibility
- Brim includes finger grips on front and rear, as well as a textured underside to reduce reflection/glare
- 6-Point suspension system with polyester textile straps offers unrivaled comfort without compromising performance
- Unique “3D Adjustment” provides a precise fit using harness depth settings…unlike any other hard hat on the US market today
-
$208.99
Features
- High-Density Polyethylene (HDPE) shell with a full brim providing additional protection against sun, glare, rain and falling debris
- Extended back brim helps protect neck and ears from the sun’s UV rays, as well as a run-off for rain and snow…short front brim shades the face while allowing excellent visibility
- Brim includes finger grips on front and rear, as well as a textured underside to reduce reflection/glare
- 6-Point suspension system with polyester textile straps offers unrivaled comfort without compromising performance
- Unique “3D Adjustment” provides a precise fit using harness depth settings…unlike any other hard hat on the US market today
-
$165.99
Features
- High-Density Polyethylene (HDPE) shell designed with five raised channels running across the top for strength, and an extended back area for extra protection
- 6-Point polyester textile suspension system offers unrivaled comfort without compromising performance
- Unique “3D Adjustment” provides a precise fit using harness depth settings unlike any other hard hat on the US market today
- Revolution Wheel Ratchet is easy to use and creates a firm comfortable fit
- Vented to reduce inside helmet temperatures
-
$165.99
Features
- High-Density Polyethylene (HDPE) shell designed with five raised channels running across the top for strength, and an extended back area for extra protection
- 6-Point polyester textile suspension system offers unrivaled comfort without compromising performance
- Unique “3D Adjustment” provides a precise fit using harness depth settings unlike any other hard hat on the US market today
- Revolution Wheel Ratchet is easy to use and creates a firm comfortable fit
- Chamlon sweatband
-
$103.99
Features
- Radians THRXV meets ANSI Z89.1 Type I Class C standards
- Meets EN 12492 Clauses 4.2.1.2; 4.2.1.3; 4.2.1.4
- Low-Profile design with an impact-resistant ABS outer shell
- Vents that promote better air circulation and cooler temperatures
- Ratchet suspension system
-
$103.99
Features
- Meets ANSI Z89.1 Type I Class E & G standards
- Meets EN 12492 Clauses 4.2.1.2; 4.2.1.3; 4.2.1.4
- Low-Profile design with an impact-resistant ABS outer shell
- Ratchet suspension system
- Universal accessory slots
-
$15.99
Features
- Meets ANSI Z89.1 Type 1 Class G & E Standards
- Made in the USA
- Full Brim
- 4 Point Ratchet Suspension
- Pillowed Brow Pad
-
$9.99
Features
- Extra-Wide Comfort Nozzle Prevents Finger Fatigue
- Resists Chipping
- Fading and Peeling
- Sprays From Any Angle Even Upside Down
- Withstands Heat to 200 Degrees F
-
$1.99
Features
- Meets ANSI Z87.1+
- Meets CSA Z94.3
- Lightweight, rimless design provides all day user comfort
- Thin, flexible temples provide a secure fit without uncomfortable pressure points
- Molded nose bridge design to fit the vast majority of users
-
![Claw Cover CC-D3 Reinforced Seamless Knit HPPE / Stainless Steel Blended with ATA Fiber Patch Glove - Heavy Weight ANSI A9 Cut Resistance [1 each] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/CC-D3-UP-600x600.jpg)
$28.29
Features:
- ANSI A9 Cut Resistant Glove
- Reinforcement in key areas of palm
- Antimicrobial fibers
- FDA 21 CFR 177.2800
- Moderate temps up to 160F
- Made in the USA
-
![West Chester 89302GY Synthetic Leather Palm with Silicone
Grip, Gray Fabric Back & Touchscreen Index Finger - XLock Cuff [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/89302GY-600x600.jpg)
![West Chester 89302GY Synthetic Leather Palm with Silicone
Grip, Gray Fabric Back & Touchscreen Index Finger - XLock Cuff [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/89302GY-UP-600x600.jpg "89302GY-UP.jpg")
$11.69
Features:
- Silicone honeycomb pattern palm for enhanced grip
- Reinforced fingertips and thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in a high-wear area
- Spandex fabric back for comfort and breathability
- XLock? Cuff tapered X-shape wrist closure provides a better fit and mobility for the wrist
- Touchscreen on index finger
- Launderable for extended life and to reduce replacement costs
-
![West Chester 89301 ToughX Suede Padded Palm with Gray Fabric
Back and Touchscreen Index Finger - XLock Cuff [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/89301-UP-600x600.jpg)
$11.19
Features:
- Engineered microfiber Tough-X? suede palm enhances grip in dry and light oil applications while providing dexterity
- ToughX? suede performance material is fast drying and lasts up to 5x longer than traditional synthetic leathers
- Padded palm provides comfort and minimizes vibration from tasks such as using a hammer of machinery
- Reinforced fingertips and thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in a high-wear area
- Padded Knuckle – Foam padding protects against bumps
- Spandex fabric back for comfort and breathability
- Hook and loop closure
- Touchscreen on index finger
-
![West Chester 89300 ToughX Suede Palm with Fabric Back and
Touchscreen Compatible Index Finger - Slip-On Cuff [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/89300-UP-600x600.jpg)
$8.49 – $9.09Price range: $8.49 through $9.09
Features:
- Engineered microfiber Tough-X? suede palm enhances grip in dry and light oil applications while providing dexterity
- ToughX? suede performance material is fast drying and lasts up to 5x longer than traditional synthetic leathers
- Reinforced fingertips and thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in a high-wear area
- Spandex fabric back for comfort and breathability
- Elastic wrist for easy on/off
- Touchscreen on index finger
-
![West Chester 86565 FR Goatskin Leather Glove with Split
Cowhide Palm Patch and Nomex Back - Hi-Vis FR Fingertips [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/86565-UP-600x600.jpg)
$17.79
Features:
- Heavy duty goatskin
- Reinforced split cowhide palm patch, thumb saddle and knuckle patch
- Orange flame-resistant cotton fingertips improve visibility for enhanced safety
- Flexible, form-fitting grey Nomex? on the back of hand is flame resistant
- Hook and loop wrist for perfect fit and feel
-
![G-Tek 730TGU Seamless
Knit PolyKor Blended Glove with Polyurethane Coated Flat Grip on Palm &
Fingers ANSI A3 Cut Resistance [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/730TGU-UP-600x600.jpg)
$60.09
Features:
- Seamless construction offers increased comfort and breathability
- PolyKor? blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
- 100% Silicone Free
- Knit Wrist helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
- Washable, resistant to chemicals, water, and ultraviolet light
-
![G-Tek 730TGLP Seamless
Knit HPPE Blend Glove with Split Cowhide Leather Palm and Kevlar Stitching -
Knit Wrist ANSI A5 Cut Resistance [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/730TGLP-UP-600x600.jpg)
$160.99
Features:
- HPPE blended yarn provides exceptional cut resistance and overall performance
- Seamless knit construction protects hands without sacrificing comfort or dexterity
- Split cowhide leather palm provides comfort, durability and excellent abrasion resistance
- Leather reinforced thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in a high-wear area
- Stitched with Kevlar? for added strength
- Knit wrist provides a secure fit and helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
-
![West Chester 730T
Seamless Knit HPPE Blended Glove - Light Weight ANSI A3 Cut Resistance [1
dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/730T-600x600.jpg)
$45.69
Features:
- Seamless knit construction protects hands without sacrificing comfort or dexterity
- HPPE blended yarns offer exceptional cut and slash resistance
- Ambidextrous pattern permits glove to be worn on either hand, extending wear and reducing costs
- Knit wrist provides a secure fit and helps prevent dirt and debris from entering the glove
- Can be worn on its own or as a glove liner
- Silicone free… so it can be used in applications requiring a silicone-free environment
- Good washability, keeps its stretch and recovery even after laundering
- Color coded hems for easy size identification
-
![PIP 715SNFTKD Seamless
Knit Nylon Glove with Nitrile Coated Foam Grip on Palm, Fingers &
Knuckles - Micro Dotted Grip [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/715SNFTKD-UP-600x600.jpg)
$40.99
Features:
- Seamless knit nylon construction provides comfort without sacrificing dexterity
- Foam Nitrile coatings are breathable and durable, designed with a cell structure that disperse fluids on contact for an improved grip
- Raised micro dots increase durability and offer more cushioning in highly repetitive applications requiring precision handling
- Knit Wrist helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
- Washable, resistant to chemicals, water, and ultraviolet light
-
![PIP 715SNFTK Seamless
Knit Nylon Glove with Nitrile Coated Foam Grip on Palm, Fingers &
Knuckles [1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/715SNFTK-UP-600x600.jpg)
$37.59
Features:
- Seamless knit nylon construction provides comfort without sacrificing dexterity
- Foam Nitrile coatings are breathable and durable, designed with a cell structure that disperse fluids on contact for an improved grip
- Knit Wrist helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
- Washable, resistant to chemicals, water, and ultraviolet light
