Showing 1041–1080 of 1271 resultsSorted by popularity
-
$53.80
Features:
- Plated forged steel construction for strength and corrosion resistance
- Includes unthreaded ring only; bolt not included
- D-Bolt style anchor for steel applications
-
$195.60
Features:
- Four directional connecting eyes
- Fastening holes for wood, concrete, and metal
- Minimum Breaking Strength of 5,000 lb
- Zinc-plated, corrosion-resistant finish
- Supports fall arrest and travel restraint applications
- Meets OSHA 1910.140 and 1926.502 requirements
-
$117.80
Features:
- Cast-in-place receptacle for attaching A311000 EVO Anchor after concrete cures
- Pre-installed on metal decking during construction
- Includes installation components for metal decking
- Bronze finish
- Pack of 25
-
$98.00
Features:
- Cast-in-place receptacle for attaching the A311000 EVO Anchor after cure
- Designed for wood decking installations
- Includes components required for attachment to wood decking
- Meets ANSI and OSHA standards
- Permanent anchorage solution; bronze finish
-
$353.00
Features:
- Installs and removes the A311000 EVO 5K removable anchor from the ground
- Enhances safety by allowing setup before leaving ground level
- Compact, 7.2 in length and lightweight 1 lb design
- Durable construction with blue finish
-
$291.00
Features:
- Removable 5K anchor
- Installs and removes from the ground using Remote Grab System (RGS)
- Minimum Breaking Strength (MBS) 5,000 lb
- Requires cast-in-place receptacle
- Meets ANSI and OSHA standards
-
$81.60
Features:
- Anodized aluminum construction
- Connects three-strand or kernmantle rope without knots or factory terminations
- Compatible with 5/8?3/4 in three-strand and 7/16?3/4 in kernmantle rope
- Minimum Breaking Strength: 5,000 lb
- Meets ANSI and OSHA standards
-
$83.90
Features:
- Fastens to underside of roof truss to provide an anchorage point
- Quick, easy fall protection solution where anchors are hard to locate
- Temporary anchor meets OSHA standards
- Minimum Breaking Strength: 1,800 lb
-
$9.70
Features:
- Convenient disposable roof anchor; knock down and shingle over after use
- Fits any roof pitch for versatile installation
- Includes fasteners; install five 16d nails per leg into rafters and sheathing
- Temporary roof anchorage solution for fall protection
-
$27.60
Features:
- Single D-ring permanent roof anchor for new construction and repairs
- Stainless steel construction with included stainless steel fasteners
- Install and leave in place for future maintenance access
- Meets OSHA and ANSI standards
-
$28.60
Features:
- Designed for use in both new construction and repair work
- Stainless steel construction with included stainless steel fasteners
- Permanent anchor can be left in place for future maintenance
- Dual D-rings for secure connection
-
$61.50
Features:
- Zinc-plated steel construction for durability
- Reusable roof anchorage for wood structures ? 3 in thick
- 2 in connector ring and 5,000 lb MBS
- Fastens with three 1/4 in x 3 in lag screws or six 16D 3 in 8 ga spiral nails
- Meets ANSI Z359.18 and OSHA standards
-
$10.40
Features:
- Temporary pour-in concrete anchor strap for formwork
- Dual loop design: pass-through loop and protruding loop for one-time use
- 6 ft length for flexible placement
- Durable polyester webbing construction
- Intended to be cut off after concrete cure
-
$9.60
Features:
- Temporary concrete anchorage?pour-in disposable strap with dual web loops
- 4 ft length for pass-through with loop protruding for one-time use
- Durable polyester webbing construction
- Color: Blue
-
$8.60
Features:
- Temporary anchor for concrete forms; cut off after one-time use
- Two web loops: one pass-through and one protruding from form
- 36 in length; blue polyester webbing
-
$27.30
Features:
- Temporary concrete anchorage for pour-in applications
- Web loop pass-through with protruding D-ring for connection
- Designed to be cut off after use
- Durable polyester webbing construction
- Approx. product length: 120 in (10 ft)
-
$21.40
Features:
- Temporary anchor for concrete pour-in applications
- 8 ft polyester web strap with loop passthrough and protruding D-ring
- Designed to be cut off after use
- Blue/black strap for easy identification
-
$17.20
Features:
- Temporary anchor for concrete forms; cut off after use
- Web loop pass-through with protruding D-ring connection
- 6 ft length; blue strap for easy identification
- Meets ANSI and OSHA standards
-
$13.50
Features:
- Temporary pour-in anchor strap for concrete forms
- Web loop pass-through with D-ring that protrudes for connection
- Designed for one-time use; cut off after concrete cure
- 4 ft length for flexible placement
- Polyester webbing construction; blue/black strap
-
$12.50
Features:
- Temporary concrete pour-in anchor strap with loop and D-ring
- 3 ft length for use in concrete forms
- D-ring designed to protrude from form and be cut off after one-time use
- Durable polyester webbing construction
-
$11.40
Features:
- Temporary concrete anchor for pour-in applications
- 2 ft length with web pass-through loop and protruding D-ring
- Disposable, cut off after one-time use
- Durable polyester webbing construction
- Meets ANSI and OSHA standards
-
$133.00
Features:
- Chain-mounted O-ring crosses the ridge for use on either roof side
- Distinctive rubber hinge construction for flexible placement
- Designed for residential roofing applications
-
$25.00
Features:
- Pivoting design for easy transport, installation, removal and storage
- Temporary use on wood rooftops; fits up to 12/12 roof pitch
- Versatile D-ring for easy connections
- Weather-resistant plated steel construction
- Includes fasteners
-
$697.10
Features:
- 6 ft roller sling anchor for overhead movement
- Made with aircraft cable, rollers and spherical spacers
- Anchorage connector follows the user along bridges or around pipe
- Helps reduce swing fall when used overhead
- Meets OSHA and ANSI Z359.18 standards; 5,000 lb MBS
-
$420.90
Features:
- 3 ft roller sling anchor for bridges and pipe
- Aircraft cable with polyurethane rollers and spacers
- Minimum Breaking Strength: 5,000 lb
- Temporary anchorage; follows the user to reduce swing fall
- Meets OSHA 29 CFR 1910.140/1926.502 and ANSI/ASSP Z359.18-2017
-
$56.90
Features:
- 8 ft anchor extension for temporary anchorage
- 1/4 in vinyl-coated galvanized cable resists harsh environments
- Includes O-ring and snap hook ends
-
$51.70
Features:
- 6 ft anchor extension with O-ring and snap hook ends
- 1/4 in vinyl-coated galvanized cable for durability
- Lightweight design stands up to harsh environments
-
$46.80
Features:
- 4 ft anchor extension with O-ring and snap hook ends
- 1/4 in vinyl-coated galvanized cable for durability
- Lightweight design for harsh environments
-
$46.30
Features:
- 3 ft anchor extension for temporary anchorage
- 1/4 in vinyl-coated galvanized cable resists harsh environments
- Ends feature O-ring and snap hook for secure connection
- Lightweight design for easy handling
-
$45.60
Features:
- Durable 1/4 in vinyl-coated galvanized cable for harsh environments
- 2 ft length ideal for anchorage extension
- O-ring and snap hook ends for secure connections
- Gray finish with robust hardware
-
$77.90
Features:
- 10 ft cable choker with pass-through O-rings
- 5/16 in vinyl-coated galvanized cable for durability
- Withstands harsh environments; ideal anchorage connector
- Gray finish
-
$71.90
Features:
- Durable 5/16 in vinyl-coated galvanized cable
- Pass-through O-ring design creates a secure anchor point
- Lightweight and built for harsh environments
- 8 ft length for versatile anchorage
- ANSI and OSHA compliant
-
$68.40
Features:
- Durable 5/16 in vinyl-coated galvanized cable
- Two O-rings pass-through design to create anchor point
- Stands up to harsh environments
- Meets ANSI and OSHA standards
-
$41.10
Features:
- 4 ft cable choker assembly without O-rings for greater application flexibility
- 5/16 in vinyl-coated galvanized aircraft cable stands up to harsh environments
- Meets ANSI and OSHA standards
- Temporary anchorage connector for general applications
-
$63.80
Features:
- Durable 5/16 in vinyl-coated galvanized cable resists harsh environments
- Pass-through O-ring design creates a secure anchor point
- 4 ft length for versatile anchorage around beams and structures
- Lightweight, gray finish
- Meets ANSI and OSHA standards
-
$61.60
Features:
- 3 ft cable choker with pass-through O-rings
- 5/16 in vinyl-coated galvanized cable for durability
- Creates a secure anchor point in harsh environments
- Gray finish
-
$59.50
Features:
- Durable 5/16 in vinyl-coated galvanized cable for harsh environments
- Pass-through design with small O-ring through large O-ring to create anchor point
- 2 ft length; gray cable with steel O-rings
- Suitable for temporary anchorage; meets ANSI and OSHA standards
-
$35.70
Features:
- Durable polyester webbing construction
- Web loop with standard D-ring for quick pass-through anchoring
- 8 ft length for versatile wrap-around anchorage
- Temporary, general-purpose anchorage connector
-
$31.30
Features:
- Durable polyester webbing
- Web loop with standard D-ring for pass-through
- Wraps around structures to create a secure anchor point
- Temporary anchorage; general-purpose use
-
$30.10
Features:
- Durable polyester webbing construction
- Web loop with standard D-ring pass-through for quick anchoring
- Creates a secure temporary anchor point when wrapped around structures
- 4 ft length, gold/black webbing
