Showing 961–1000 of 1271 resultsSorted by popularity
-
Features:
- Energy efficient design with insulated door and weather stripping
- Air-locking seal reduces drafts and air leakage up to 60%
- Universal fit for 22.5 in x 54 in openings and 8?10 ft ceilings
- Lightweight aluminum construction with 375 lb load capacity
- Smooth operation with gas struts and slip-resistant steps
-
Features:
- Universal aluminum stabilizer for aluminum ladders of all duty ratings
- 47 in span with 10 in standoff for added reach and stability
- Mar-resistant rubber end caps protect work surfaces
- Paint can hook included; attaches in minutes with hardware
- Ideal for stabilizing M1 multi-ladders in scaffold or stairway positions
-
Features:
- QuickClick spring-loaded latch for fast install/removal
- No tools required to attach to ladder
- Mar-resistant rubber end caps protect surfaces
- 44 in span with 10 in standoff for window and gutter work
- Paint can hook included; for ladders up to 40 ft
-
Features:
- Easily retrofitted to Werner Podium ladders
- Fully surrounds the user for 360? contact on the top platform
- Gate swings open and locks closed for safer ascent/descent
- Work facing any direction within ladder footprint
- Folds neatly for easy access and storage
-
Features:
- Secures tools by wrapping around grips and locking into Werner Lock-In sockets
- Compatible with ToolLasso belt clip, Job Caddy, and Utility Bucket
- Keeps tools within reach to reduce trips up and down ladders
- Includes 1 belt clip and 2 ToolLassos
-
Features:
- Lock-In design secures to Werner LOCKTOP, Job Caddy or Utility Bucket
- Keeps cords and hoses organized and within reach
- Holds extension cords, air hoses, garden hoses, lights, paint sprayers and tools
- Ideal for electrical, maintenance, plumbing, construction and painting trades
-
Features:
- Expands ladder top work surface for large or odd-shaped items
- Four storage compartments keep small parts separated
- Holders for screwdrivers, pliers, putty knives and towels
- Built-in end hook for added convenience
- Integrated Lock-In System socket accepts Paint Cup, ToolLasso or Utility Hook
-
Features:
- Locks into Werner ladder tops to expand work surface
- Holds up to 25 lb of tools or 1 gallon of liquid
- Integrated Lock-In System socket accepts Paint Cup, ToolLasso or Utility Hook
- Ideal for wet or dry applications; boosts productivity
-
Features:
- 600 cu in storage to expand ladder workspace
- 25 lb load capacity for tools and supplies
- Lock-In System fits into Werner ladder tops with LOCKTOP sockets
- Integrated tape measure and screwdriver holders
- Top grooves hold round pipes securely
-
Features:
- Holds 1 quart of paint
- Built-in magnet secures paintbrush
- For Werner ladders with Lock-In System sockets
- Compatible with AC27-L disposable liner
- Ideal for trim painting and cut-in work
-
Features:
- Disposable liners for the AC27-P Lock-In Paint Cup
- Easy clean-up and quick change
- Includes four (4) liners per pack
-
Features:
- Convenient tray holds tools, paint, and supplies
- Attaches easily and works at multiple heights
- Designed for Werner MT multi-position ladders and Type IA/IAA stepladders
- Includes sockets for ToolLasso and accessories
-
Features:
- Holds a one-gallon paint can to free hands while working
- Easy on/off; usable right- or left-handed
- Includes two steel hooks with built-in can openers
- Fits all extension ladders
-
Features:
- Helps prevent damage to support surfaces
- Snaps over extension ladder rail end caps
- Resists paints, stains, thinners and solvents
- For single and extension fiberglass and aluminum ladders
-
Features:
- Slip-resistant standing surface
- Durable aluminum construction
- Easily flips out of the way for safe climbing
- Rated 300 lb load capacity (evenly distributed)
- Designed for Werner MT series multi-ladders
-
Features:
- Wall-mounted hanger holds stepladders securely
- Industrial-strength coated steel wire construction
- Compact, lightweight design for easy installation
-
Features:
- Lightweight, sturdy, easy to use
- Designed for quick field adjustments
- Mounts on either side of the extension ladder
- 3-rung model; accepts stages up to 20 in width
- Platform Clamp System secures platform and ties supporting ladders together
- Recommended with Type IA (300 lb) and Type IAA (375 lb) ladders; OSHA/ANSI allow Type I (250 lb)
-
Features:
- Lightweight, sturdy, easy to use
- Designed for quick field adjustments
- Mounts on either side of an extension ladder
- 2-rung long body design; accepts stages up to 20 in width
- Platform Clamp System secures platform and ties supporting ladders together
- Use with Type IA (300 lb) or Type IAA (375 lb) ladders; OSHA/ANSI allow Type I (250 lb)
-
Features:
- Supports stages/planks up to 14 inches wide
- Lightweight, sturdy aluminum construction
- Designed for quick field adjustments
- Mounts on either side of an extension ladder
- Platform Clamp System secures platform and ties supporting ladders together
- Recommended with Type IA (300 lb) and Type IAA (375 lb) ladders; OSHA/ANSI allow Type I (250 lb)
-
Features:
- Supports stages or planks up to 14 inches wide
- Lightweight yet sturdy aluminum construction
- Mounts on either side of an extension ladder
- Designed for quick field adjustments
- Platform Clamp System secures platform and ties supporting ladders together
- Recommended with Type IA (300 lb) and Type IAA (375 lb) extension ladders; OSHA/ANSI allow use with Type I (250 lb)
-
$389.30
Features:
- Portable anchorage connector for underground mining and tunneling
- Installs directly inside 39 mm friction rock bolts
- Steel construction with silver finish
- Temporary anchorage; suitable for rock applications
-
$28.40
Features:
- Single-piece permanent roof anchor for new construction and future maintenance
- Stainless steel construction with corrosion resistance
- Designed as a 5,000 lb minimum breaking strength anchor
- Easy installation; leave-in-place design
-
$233.80
Features:
- Drop-through overhead anchorage connector with 12 in plate and 8.5 ft cable
- Rated 5,000 lb Minimum Breaking Strength
- Fits 1.75?6 in openings; attaches to concrete floors, steel girders, and grates
- 1/4 in thick steel plate with swivel ring for easy connection
- Meets ANSI Z359.18 and OSHA requirements
-
$233.80
Features:
- 5,000 lb minimum breaking strength
- Drops through 1.75?2 in overhead openings for secure anchorage
- 12 in square steel plate with 6 ft cable and swivel D-ring
- Suitable for concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA requirements
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75 in to 6 in openings
- 1/4 in thick steel plate with 2 ft cable and swivel ring
- Attaches to concrete floors, steel girders, and grates
- Meets ANSI and OSHA standards
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75?6 in openings
- 1/4 in thick steel plate with 1 ft cable and swivel ring
- Use on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA standards
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75 in to 3 in openings
- 1/4 in thick steel plate with 8.5 ft cable and swivel ring
- Use on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA requirements
-
$233.80
Features:
- Designed to drop through 1.75?3 in overhead openings for secure anchorage
- 6 in square steel plate with 6 ft cable and swivel D-ring
- 5,000 lb minimum breaking strength
- Usable on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA requirements
-
$233.80
Features:
- Drop-through overhead anchorage connector for 1.75?3 in openings
- 6 in steel plate with 2 ft cable and swivel ring
- 5,000 lb Minimum Breaking Strength (MBS)
- Attaches to concrete floors, steel girders, and grates
- Meets OSHA and ANSI Z359.18 standards
-
$233.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75?3 in openings
- 1/4 in thick steel plate with 1 ft cable and swivel ring
- Attaches to concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA standards
-
$151.80
Features:
- 5,000 lb capacity overhead anchorage connector
- Designed to drop through 1.75?2 in openings
- 1/4 in thick steel plate with 8.5 ft cable and swivel ring
- Use on concrete floors, steel girders, and grates
- Meets ANSI Z359.18 and OSHA standards
-
$151.80
Features:
- Drop-through overhead anchorage connector
- 4-inch square steel plate with 6-foot cable
- Swivel D-ring connection
- Minimum Breaking Strength of 5,000 lb
- Suitable for concrete floors, steel girders, and grates
-
$151.80
Features:
- Drop-through anchorage fits 1.75?2 in openings
- 4 in steel plate with 2 ft cable and swivel ring
- 5,000 lb minimum breaking strength
- Attaches to concrete floors, steel girders, and grates
- Meets OSHA and ANSI Z359.18 standards
-
$817.00
Features:
- Adjustable to fit 20?59 in door or window frames
- Tool-free installation with damage-free clamping
- Durable aluminum construction with rubber-lined anchor pads
- Integrated D-ring connection point; rotating connection
- Meets ANSI Z359.18 and OSHA 1910.140/1926.502 standards
-
$98.80
Features:
- Weld-on steel puck mounts a 10K Mega-Swivel anchor
- 3 in diameter x 1 in thick puck with threaded center
- Includes welding puck, 5/8 in bolt, and lock washer
- Durable steel construction; gray finish
- Suitable for permanent anchorage installations
-
$310.10
Features:
- Designed to be welded into place
- 316 stainless steel construction
- Includes 5/8 in x 1.75 in bolt and internal tooth lock washer
-
$40.90
Features:
- Specially designed tool for setting expansion sleeves in concrete holes
- Durable steel construction
- Compatible with Werner Concrete Bolt anchorage systems
- Gray finish
-
$37.10
Features:
- Replacement bolts for 5K Stainless Steel Mega-Swivel
- Designed for concrete applications
- Stainless steel construction
- Pack of 10
-
$52.30
Features:
- Stainless steel replacement bolts for 5K Mega-Swivel (steel applications)
- Pack of 10 for maintenance and replacements
- Designed for Werner A5700 Series anchorage connectors
