Showing 41–80 of 84 resultsSorted by popularity
-
$727.99
DeWalt DCK551D1M1 20V Max 5-Tool Cordless Drill Combo Kit This Cordless 5-Tool Combo Kit features DEWALT cordless tools including a 1/2-inch Drill/Driver, Reciprocating Saw, 6-1/2-inch Circular Saw, Brushless Oscillating Multi-Tool, 1/4-inch Impact Driver, 20V MAX 2.0Ah battery, 20V MAX 4.0Ah battery, charger, and bag. The DCS393 Circular Saw with a 6-1/2-inch carbide blade can cut…
-
$484.99
Features
- delivers 1420 ft-lbs of max fastening torque and 1900 ft-lbs of max breakaway torque
- Up To 102 % More Torque
- prevent overtightening and fastener run-off
- resist damage from oil, grease, and solvents with oil-resistant tool housing
-
6% OFF
$399.99 Original price was: $399.99.$375.99Current price is: $375.99.
Features
- The Dewalt DCN623D1 unit works with 23 Ga. pin nails from 5/8″ up to 1-1/2 in. in length
- tool-free jam release and tool-free depth adjust
- Low nail lockout system with LED indicator to inform user when it’s time to reload
- Drives 2,000 nails on average per charge
-
$253.99
Features
- The Dewalt DCF850E1 includes a Compact impact driver, under 4 in. design for optimized ergonomics and access to difficult-to-reach spots
- Delivers 1,825 in-lbs of torque and 3,250 RPM to drive large diameter screws
- Enabled by variable 3-speed trigger
- Integrated 3-LED work light enhances visibility in dimly lit spaces
-
![Dewalt DCK265D2 20V Max Xr Brushless Drywall Screwgun and Cut-Out Tool Combo Kit [2.0Ah] product image](https://www.heydensupply.com/wp-content/uploads/2023/08/dewalt-20v-max-xr-2-tool-combo-kit-dck265d2-detail-view-3-600x600.jpg "dewalt-20v-max-xr-2-tool-combo-kit-dck265d2-detail-view-3")
$483.99
Features
- The Dewalt DCK265D2 has a Brushless motor for efficient performance and runtime
- Wide variable speed range with dedicated High and Low settings helps optimize usage in light- and heavy-gauge substrates
- Four dedicated tool modes enable operation of tool in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode
- Top-mounted electronic mode select enables fast, one-handed switching between the tool’s four modes
- Tool-free bit change enables fast bit changes without the need for a wrench
-
Features
- The Dewalt DCK279C2 includes the DCD709 hammer drill/driver, compact at only 6.9 in. front to back designed to fit in tight spaces
- DCD709 hammer drill/driver is lightweight at only 2.5 lbs.
- DCF809 Impact Driver is only 5.1 in. in length to fit in tight spaces.
- DCF809 Impact Driver is lightweight at only 2.1 lbs.
-
5% OFF
$817.99 Original price was: $817.99.$777.09Current price is: $777.09.
Features
- Work in tight spaces with the lightweight, compact 7-1/2 in. Drill/Driver and 5-2/5 in. Cordless Impact Driver included in the Dewalt DCKSS676D2
- Brighten dark work areas: DCD777 Cordless Drill/Driver features an LED work light with 20-second trigger-release delay for enhanced visibility
- Professional speed and application control with DCF787 Cordless Impact Driver”s variable speed trigger for precision on delicate work surfaces
- Quick bevel adjustments: Brushless Circular Saw bevel shifts from 0 – 50° with a tool-free lever
- Quickly change blades and attachments without wrenches using the DCS356 Quick Change accessory system
-
$597.99
Features
- Dewalt DCE400D2 Expands 3/8 in. – 1 in. Pex Type-A tubing
- Automatic rotating head action for even expansion
- Full trigger actuation for use in tight spaces
- Bright LED work light to help illuminate dark areas
- Uses DEWALT® PEX Heads. Compatible with Milwaukee® and Uponor® Heads. (Milwaukee® is a registered trademark of Milwaukee Electric Tool Corp. Uponor® is a registered trademark of Uponor Oyj.)
-
$265.99
Features
- Complete challenging projects with up to 40% more with the Dewalt DCD800P1 vs. the DCD791B using DCB205 battery (sold separately)
- Access hard to reach work areas: Compact 6.37 in. size is 1/2 in. shorter in length compared to the DCD791, tool head only.
- High bit retention with 1/2 in. metal ratcheting chuck
- Pro-level speed, control and precession: High-speed transmission with variable trigger and 2 speed settings (0-650/0-2,000 rpm)
- Brighten dark work areas: Adjustable 3-Position, 3 Mode LED with up to 70 Lumens, including LED spotlight mode which features a 20-minute shutoff function for extended work time in low-light spaces
-
$1,213.99
Features
- Dewalt DCF414GE2 features a BRUSHLESS MOTOR that delivers up to 4,500 lb of pulling force for fastening rivets, including those made of stainless steel
- GET UP TO 300 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/16″, 15/64″, and 1/4″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-
$545.99
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
-
$545.99
Features
- Micro nose
- Brushless motor
- 100% battery powered
- Tool-free selectable trigger
- Tool-free depth adjustment
-
$1,005.99
Features
- Gas-free operation eliminates the need for fuel cells and provides a consistent, powerful alternative that operates on the DEWALT 20V MAX battery platform
- Variable power settings allow for pin depth adjustment and substrate versatility
- Field-serviceable driver blade reduces downtime of tool
- Comparable application speed to gas concrete nailers
- Dual LED worklights help illuminate work surface and provide onboard diagnostics
-
5% OFF
$423.99 Original price was: $423.99.$402.79Current price is: $402.79.
Features
- 1- 1/8″ diameter vibrator delivers maximum consolidation power.
- 4 foot long flexible shaft for easy use and long reach.
- 14,000 VPM (under load) delivers maximum consolidation efficiency.
-
$605.99
Features
- 1 – 1/8″ diameter vibrator delivers maximum consolidation power.
- 4 foot long flexible shaft for easy use and long reach.
- 14,000 VPM [under load] delivers maximum consolidation efficiency.
-
4% OFF
$448.99 Original price was: $448.99.$431.03Current price is: $431.03.
Features
- Dewalt DCN680D1 is 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
DCN680D1 Instruction manual
-
$662.99
Features
- Fast Drilling in Concrete With 2.1 joules of impact energy
- OSHA Table 1 Compliant when paired with DWH303DH on-board extractor
- Shocks Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature
- mechanism and brushless motor for efficient performance and runtime.
- Lightweight Design makes this tool ideal for rod hanging, seismic & safety attachments, cable tray & strut mounting, clamp mounting, and rail mounting.
-
6% OFF
![Dewalt DCW210P1 20V MAX XR Brushless 5 in. Cordless Variable Speed Random Orbital Sander Kit [5.0 Ah Battery] product image](https://www.heydensupply.com/wp-content/uploads/2023/03/7AB85899-D781-48DD-866F-A17F0396B4DE_7-600x600.jpg)
$326.99 Original price was: $326.99.$307.37Current price is: $307.37.
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable speed control from 8,000 – 12,000 OPM to match the speed to the application.
- Low profile height allows user to get close to work surface for precise sanding.
- Replaceable 8-hole hook-and-loop sanding pad (DWE64233) for quick, easy paper changing.
- Dust-sealed switch to protect against dust ingestion for long switch life.
-
$196.99
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable-speed control from 8,000 to 12,000 OPM to match the speed to the application.
- Low-profile height allows user to get close to work surface for precise sanding.
- Replaceable 8-hole hook-and-loop sanding pad (DWE64233) for quick, easy paper changing.
- Dust-sealed switch to protect against dust ingestion for long switch life
-
$564.99
Features
- 1800 Watt Portable Power Station
- 4 Port Simultaneous Charger
- Four 20V MAX* batteries in (including FLEXVOLT), 15 amps ou
- Batteries and extension cord sold separately
- Runs most variable speed power tools
-
![[Tool Only] Dewalt DCW200B 20V MAX* XR® Brushless Cordless 1/4 Sheet Variable Speed Sander product image](https://www.heydensupply.com/wp-content/uploads/2023/03/3AB72EEE-9086-4498-8298-52C831440BC4_7-600x600.jpg)
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable speed control from 8,000 – 14,000 OPM to match the speed to the application
- Low profile height allows user to get close to work surface for precise sanding
- Paper clamp designed to hold paper securely and allow for easy installation
- Dust-sealed switch to protect against dust ingestion for long switch life
-
$186.67
Features
- Extended Runtime of your 20V MAX* tools with 5.0Ah of power
- 3-LED fuel gauge indicator
- Battery can be used with all DEWALT and Mac Tools 12V MAX*/20V MAX* tools and chargers
- Recommended for work involving regular exposure to oil, grease, and solvents
-
$240.45
Features
- Get 50% more power† to tackle tough jobs
- Battery is 50% more efficient making it DEWALT®’s most efficient battery in its class
- The non-marring over-molded rubber base also helps to protect finished surfaces
- 2X lifespan provides more overall investment value.
- Battery works with all DEWALT 20V MAX tools and chargers
-
$303.45
Features
- Get 50% more power to tackle tough jobs
- Battery is 50% more efficient making it DEWALT®’s most efficient battery in its class
- The non-marring over-molded rubber base also helps to protect finished surfaces
- 2X lifespan provides more overall investment value.
- Battery works with all DEWALT® 20V MAX* tools and chargers
-
$366.45
Features
- Packed with power – Get 50% more power to tackle tough jobs
- More efficient– Battery is 50% more efficient making it DEWALT®’s most efficient battery in its class
- Durable design: The non-marring over-molded rubber base also helps to protect finished surfaces
- Long-Lasting: 2X lifespan provides more overall investment value.
- Dewalt 20V MAX System Compatibility: Battery works with all DEWALT® 20V MAX* tools and chargers
-
$514.99
Features
- Able to cut 1/4″, 3/8″, 1/2″ Mild Steel Coarse Threaded Rod
- Able to cut 1/4″, 3/8″ Stainless Steel Coarse Threaded Rod
- Clean, burr-free cuts allowing for easy threading
- Bright LED light to help illuminate cutting area
- Rotating cutter allows you to cut multiple sizes of rod with one cutting die
-
$175.99
Features
- DCS354B delivers up to 57% more run time
- variable speed trigger
- Quick-Change accessory system
- LED Light
DCS354B Instruction Manual
-
$253.99
Features
- The 3-speed selector allows users to choose their speed setting based on application
- Brushless motor delivers up to 57% more runtime over brushed
- Dual-Grip™ variable-speed trigger gives users ultimate speed and application control
- Universal accessory adapter makes it compatible with most oscillating tool accessory brands
- Quick-Change™ accessory system allows blades and attachments to be changed quickly without wrenches
-
$302.99
Features
- Variable speed trigger allows operator to adjust speed of cut during use
- Cuts up to 5/8-in fiber cement board
- LED light with 20 second delay after trigger release
- Little to no dust created during cutting action
-
![[Tool Only] Dewalt DCS368B 20V Max XR Brushless Cordless Reciprocating Saw With Power Detect Tool Technology Kit product image](https://www.heydensupply.com/wp-content/uploads/2023/02/52E835AC-3CDF-415A-B49C-2BB9EABB021C_7-600x600.jpg)
$317.99
Features
- Variable speed trigger with 0-3000 SPM provides blade control and fast cutting speeds
- 1-1/8-In stroke length delivers a fast cutting speed
- Keyless lever-action blade clamp for quick and easy blade changes
- 20V MAX; Maximum initial battery voltage (measured without a workload) is 20 volts; nominal voltage is 18
- POWER DETECT Tool Technology detects high-capacity batteries to maximize tool output
-
Features
- Greater speed than DW272 corded screwgun with up to 4,400 RPM
- DEWALT built brushless motor for efficient performance and runtime
- Nosecone locks on securely and is easily removed while maintaining consistent screw depth
- Compatible with the DCF6201 Collated Magazine Attachment
- Illuminate dark work areas and increase visibility with the LED
-
$138.99
Features
- Dual speakers for rich stereo sound
- Bluetooth® connectivity – 100ft range
- Convenient carry handle with phone holder
- Bass reflex port enhances low-frequency performance
- Play/pause, skip tracks, and control volume from speaker
-
$217.99
Features
- Dual 3.5 in. woofers and 1 in. tweeters for stereo sound
- Heavy-duty roll cage with antenna slot for josbite durability and protection
- Bluetooth connectivity up to 100 ft. away for music streaming
- AM/FM radio with 6 presets to customize to your favorite stations
- USB power port for device charging
-
4% OFF
$228.99 Original price was: $228.99.$219.83Current price is: $219.83.
Features
- Brushless motor for efficient performance and runtime
- Wide variable speed range with dedicated High and Low settings helps optimize usage in light- and heavy-gauge substrates
- Four dedicated tool modes enable operation of tool in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode
- Top-mounted electronic mode select enables fast, one-handed switching between the tool’s four modes
- Tool Connect CHIP READY: Chip pocket accepts Tool Connect™ Chip DCE042 and connects with Tool Connect™ Site Manager app for easy asset management on the jobsite. (DCE042 sold separately)
-
$520.99
Features
- For comfortable use when working in tight spaces with compact and lightweight design
- LED work light
- Helps Prevent Overtightening and Fastener run off with Precision Wrench control
- 4 speed settings and a variable speed trigger
- 600 ft-lbs of max fastening torque and 800 ft-lbs of max breakaway torque
-
$387.99
Features
- DEWALT built brushless motor and XR Li-ion batteries deliver more run time and capacity over standard units
- DCF887M2 features a 3-speed settings for optimized application versatility
- Precision drive in speed 1 for precision applications and added control
- 3 LED lights with 20 second delay after trigger release, provide visibility without shadows
- 1-handed loading 1/4-in hex chuck with easy grip sleeve, accepts 1-in bit tips
- Compact and lightweight design to fit into tight areas (6 mm shorter than the previous DCF886)
- Includes 1 DCF887 20-volt MAX XR 1/4-in 3-speed impact driver, two 4.0-Ah 20-volt MAX XR batteries, 1 fast charger, 1 belt hook
-
$569.99
Features
- Centered handle position provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue
- LED work light with 20 second delay illuminates dark work surfaces for accurate cutting
- Integrated hang hook allows user to hang the saw without damaging the front handle or base
- Blade tracking adjustment increases blade life by providing better blade tracking
- Tool-free blade changing lever loosens blade tension to allow for blade change
- Dual-bearing blade guide rollers provides increased durability in the blade support system
- Ergonomic soft grip back handle provides comfort and flexibility
-
$559.00
Features
- OSHA Table 1 Compliant when paired with DWH303DH On Board Extractor
- Brushless motor and durable German-engineered mechanism for efficient performance and runtime.
- Rotating Dial to set tool to a specific application mode – Drill, Hammer Drill, or Chip.
- SHOCKS™- Active Vibration Control significantly reduces vibration and increases user comfort and productivity, A Perform and Protect Feature
- 2.1 Joules impact energy provides corded power without the cord
-
![[Tool Only] Dewalt DCS386B 20V MAX* Brushless Cordless Reciprocating Saw with FLEXVOLT ADVANTAGE product image](https://www.heydensupply.com/wp-content/uploads/2022/12/0ff0d679-56bd-4fe0-894f-a13220f2b46d-600x600.jpg "0ff0d679-56bd-4fe0-894f-a13220f2b46d")
$317.99
Features
- UP TO 50% MORE POWER WITH FLEXVOLT® BATTERIES
- FAST CUTTING: 1-1/8 in. stroke length delivers a fast cutting speed
- EASY BLADE CHANGES: Keyless lever-action blade clamp for quick and easy blade changes
- BLADE CONTROL: Variable-speed trigger with 0-3,000 spm provides blade control
- INCREASED VISIBILITY: Bright LED for better visibility in low-light work areas
- Tool Connect™ Chip Ready: Chip pocket accepts Tool Connect™ Chip DCE042 and connects with Tool Connect™ Site Manager app for easy asset management on the jobsite. (DCE042 sold separately)
- COMPATIBLE with all DEWALT® 20V MAX* and FLEXVOLT® Batteries
-
20% OFF
$495.00 Original price was: $495.00.$395.00Current price is: $395.00.
Features
- The DCD999 Hammer Drill gets up to 42% more power** when paired with FLEXVOLT® batteries
- Both tools compatible with all DEWALT® 20V MAX* and FLEXVOLT® Batteries
- 20X BRIGHTER LED: The DCD999 3-mode LED provides lighting in dark or confined spaces up to 20x brighter than the DEWALT DCD985
- EXTENDED WORK TIME WITH LED: The DCD999 features an LED spotlight mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
- VERSATILITY: The DCF887 has application versatility with 3-speed settings
