Showing all 32 resultsSorted by popularity
-
14% OFF
$12.90 Original price was: $12.90.$11.05Current price is: $11.05.
Features
- Every other tooth is ground thinner for fast cuts
- Thicker plate design for improved tracking
- Reinforced shoulder for durability and impact resistance
- Body slots dissipate heat for long blade life
Minimum order quantity: 10
Order in multiples of: 10
-
20% OFF
$10.99 Original price was: $10.99.$8.84Current price is: $8.84.
Features
- 1 Diablo Blade performs like 5 standard blades
- 30% more cuts per battery charge in cordless saws versus other blades)
- Newly Enhanced Anti-Vibration design
- Perma-Shield Non-stick coating resists heat, gumming and corrosion
- Laser-Cut Thin kerf for less resistance and greater cutting efficiency
Minimum order quantity: 10
-
$10.99
Features:
- 10 PACK – 10 Blades per unit
- Up to 70% faster cutting compared to standard blades
- High grade Tungsten carbide tips for durability
- Blade coating provides reduced pitch build-up
- Reduced swing width
- Top bevel angle with 23° tip for a smoother cut
-
Features
- DW08302CG features a Green beam for increased visibility
- 120 ft. range
- 1/8 in. accuracy at 30 ft.
- Water and debris resistant with an IP54 rating
- 1 meter drop rating
-
Features
- Exposed nail tip places fastener point directly into connector holes for a fast and precise application
- In-line magazine offers balance for maneuverability
- Adjustable rafter hook allows user to hang tool on rafters and joists
- Exclusive nail management feature helps to prevent jamming (patent pending)
- Drives 1-1/2″ and 2-1/2″ STRAPSHOT™ fasteners as well as other paper tape collated metal connector nails
-
$235.99
Features:
- Industrial-grade design for high-speed, high-volume framing
- Lightweight with ergonomic balance for comfort and control
- Recoil-dampening engine system helps minimize recoil
- Supports 30° paper tape clipped and full round head nails
- Selectable bump and sequential firing modes
-
New Product
20% OFF
$468.99 Original price was: $468.99.$375.23Current price is: $375.23.
Features
- Exposed nail tip places fastener point directly into connector holes for a fast and precise application
- In-line magazine offers balance for maneuverability
- Adjustable rafter hook allows user to hang tool on rafters and joists
- Exclusive nail management feature helps to prevent jamming (patent pending)
- Drives 1-1/2″ and 2-1/2″ STRAPSHOT™ fasteners as well as other paper tape collated metal connector nails
-
$142.00
Features:
- Relief Handles enable “Chair in the Air” position after fall arrest to help reduce suspension trauma
- 5-point adjustments for optimal fit with bright, high-visibility colors
- Sliding rear dorsal D-ring; hip D-rings for positioning
- Quick-Connect chest buckle; tongue buckle leg straps
- Padded waist belt and shoulder pads for comfort; removable body belt
- Meets ANSI Z359.11-2021 and OSHA 1910.140/1926.502
-
Features:
- Type IA, 300 lb rating for demanding jobsite use
- Single rear rail tripod design fits tight spaces and uneven areas
- Slip-resistant Traction-Tred steps; double-riveted for durability
- Molded external rail shields protect against abrasion and damage
- Convenient spreader handle for quicker setup and easy transport
- Non-conductive fiberglass rails for work near electricity
-
$529.00
Features:
- Accurate within ±1/8 in. at 30 ft. for precise plumb and level lines
- 20V MAX and 12V MAX compatible for flexible power options
- Up to 17 hours runtime with included 20V MAX 2Ah battery
- Self-leveling cross-line green laser with individual line/spot control
- Magnetic mount, fine adjust knob, rotating head and locking pendulum
- Kit includes battery, charger, ceiling/wall bracket, target and TSTAK case
-
$499.00
Features:
- All-in-one 360° three-plane level and alignment with one horizontal and two vertical green-beam lines
- Power flexibility: 3.7V Li-Ion 3.0Ah battery included, AA battery adapter, and USB‑C charging
- IP65 jobsite-tough housing with full rubber overmold and rubber grip base
- VisiMax technology optimizes visibility and extends battery life; power-saving mode
- 100 ft range (1/8 in at 30 ft accuracy); up to 260 ft with receiver (sold separately)
- Smart Pendulum self-levels, indicates out-of-level, and locks for transport
- Magnetic L‑bracket and 1/4-20 & 5/8-11 tripod threading for versatile mounting
-
$249.99
Features:
- Angled, illuminated rotating flip display for easy reading
- Displays degrees, percent, or feet/inches with hold/copy function
- Audible tone indicator at level or 90°
- Accuracy at 0° or 90°: ±0.05°; 360° tilt sensor
- Robust aluminum housing with IP54 protection; includes carry case and 4 AA batteries
-
$319.00
Features:
- Green-beam cross-line laser with plumb points; up to 4X brighter than red
- Power flexibility: 3.7V Li‑Ion 3.0Ah battery or AA batteries (adapter included)
- IP65 dust-tight, water-resistant housing with full rubber overmold
- USB‑C fast charging, even while in use; outstanding 8‑hour runtime (Li‑Ion)
- Smart Pendulum self-levels, indicates out-of-level, and locks for transport
- Range 100 ft (330 ft with receiver); 1/8 in accuracy at 30 ft
- Fine adjustment mount with pivot rotation and 1/4-20 threading
-
$19.29
Features:
- General-Purpose EDGE blades engineered for framing and versatile jobsite cutting
- Brute Carbide upgraded C3/C4 micrograin tips for impact resistance
- SpeedCoat finish reduces friction for faster, cleaner cuts
- Extra-hard steel body resists bending for accurate, true cuts
- 7-1/4 in., 24T, 5/8 in. arbor; bulk pack of 25 blades
-
$229.00
Features:
- PROFACTOR performance delivers corded-like power in a 7-1/4 in. cordless saw
- 2-1/2 in. cut capacity across the full 0°–50° bevel range
- Electronic convenience brake for faster, safer repetitive cuts
- BITURBO Brushless motor optimized for CORE18V High Power batteries
- 50° bevel range with front bevel lock and auxiliary handle for control
- 360° pivoting dust port directs debris or vac hose away from the user
-
$249.00
Features:
- PROFACTOR performance delivers wormdrive-like functionality with corded-comparable power
- Fast cutting with 5,000 RPM
- 2-5/8 in. cutting capacity for “two-by” materials
- Left blade orientation for improved line-of-cut visibility (right-handed users)
- Electronic convenience brake stops blade quickly
- Rear-handle ergonomic design for reach, balance and reduced fatigue
- 360° pivoting dust port and integrated saw hook
-
$129.00
Features:
- 15 Amp high-output motor for fast, smooth cutting
- Die-cast magnesium footplate for durability and flatness
- 56° bevel capacity with detents at 22.5° and 45°
- Anti-snag lower guard and optimized sight lines
- Soft-grip handle, spindle lock, and 10 ft cord
-
$129.00
Features:
- Three-point plumb and level projection for level, plumb, 90° and grade points
- Bright green-beam laser up to 4X brighter than red
- VisiMax technology optimizes brightness and battery life
- Smart Pendulum self-levels, indicates out-of-level, and locks for transport
- Full rubber overmold housing and IP65 rating for durability
- Integrated magnetic multipurpose mount with 1/4-20 threading
-
$579.00
Features:
- 12V Max 360° connected green-beam three-plane leveling and alignment-line laser kit
- Bright green beam up to 4X brighter than red; working range up to 200 ft diameter
- Pulse mode extends range to 330 ft diameter with optional LR8 receiver
- VisiMax technology optimizes visibility and battery life
- Bluetooth control via free Bosch Leveling Remote App
- Dual power: Bosch 12V Max Li-ion battery or four AA batteries
- Smart Pendulum self-levels and indicates out-of-level up to ±4°; manual mode for angled lines
- IP54 jobsite-tough over-molded construction
-
$276.75
Features:
- Lightweight magnesium construction reduces user fatigue
- 15 Amp motor delivers power for tough cuts
- Blade-left worm drive design for clear cut-line visibility
- 53° bevel capacity with positive stop at 45°
- Anti-snag lower guard for smooth small cut-offs
- Spindle lock and large levers for quick blade and setting changes
- Built-in saw hook for convenient storage between cuts
-
$199.00
Features:
- Five-point plumb and level projection for level, plumb, 90° and grade points
- Bright green beam up to 4X brighter than red
- VisiMax technology optimizes brightness and battery life
- Smart Pendulum self-levels and locks for transport
- Full rubber overmold housing and IP65 rating
- Integrated multipurpose mount with magnets and 1/4-20 threading
- Working range up to 125 ft; includes hard case and AA batteries
-
$79.21
Features:
- 7/8 in. diameter, 6 in. length spade bit designed for fast, clean wood drilling
- Fully threaded tip pulls the bit through wood for speed
- Contoured paddle with spur-and-reamer tips for cleaner holes and chip removal
- 1/4 in. shank fits most corded and cordless drills
- Blue Daredevil finish; 40-piece bulk pack
-
$3.25
Features:
- 50-piece 3/8 in. x 6 in. Daredevil standard spade bits
- Fully threaded tip pulls the bit through wood for fast drilling
- Contoured paddle design for quicker chip evacuation
- Spur-and-reamer tips help deliver cleaner holes with reduced blowout
- 1/4 in. hex shank for use with corded or cordless drills
-
$5.57
Features:
- Fully threaded tip pulls the bit through wood for fast drilling
- Contoured paddle design for rapid chip removal and speed
- Spur-and-reamer tips pre-cut wood for cleaner holes with less blowout
- Designed for use with corded and cordless drills
- Blue finish Daredevil spade bit with 1/4 in. hex shank
-
$5.57
Features:
- 1-3/8 in. diameter Daredevil standard spade bit
- Fully threaded tip pulls the bit through wood for fast drilling
- Contoured paddle design for quicker chip removal
- Spur-and-reamer tips help produce cleaner holes with reduced blowout
- Designed for use with corded and cordless drills
-
$74.78
Features:
- 3/4 in. diameter, 6 in. length spade bit with 1/4 in. shank
- Fully threaded tip pulls the bit through wood for fast drilling
- Contoured paddle design for rapid chip removal
- Spur-and-reamer tips for extra-clean hole entry and reduced blowout
- For use with corded or cordless drills; ideal for wood applications
-
$3.75
Features:
- 1 in. x 6 in. Daredevil standard spade bits for fast, clean wood drilling
- Fully threaded tip pulls the bit through wood for speed
- Contoured paddle design for faster chip removal
- Spur-and-reamer tips help reduce blowout and leave cleaner holes
- Pack of 30 bits for high-volume jobs
-
$12.59
Features
- LONG-LASTING PERFORMANCE with up to 2X the life of Diablo
- BUILT FOR LONG LIFE with mulit-tooth design for aggressive cuts
- DESIGNED for DURABILITY from Proprietary welded carbide tips
- SMOOTH, EFFORTLESS CUTTING with large heat vents for cool cuts
- Large Heat Vents For Cool Cuts and Effortless Smooth Cuts
-
![[10 Pack] DEWALT DWA171424B10 7-1/4in 24T Small Diameter Circular Saw Blades product image](https://www.heydensupply.com/wp-content/uploads/2022/12/71ED0XpkoOS-600x600.jpg "71ED0XpkoOS")
$9.99
Features
- Reinforced soulder for impact resistance in nail-embedded wood
- anti-stick coating reduces friction and gumming
- Thin kerf design for smooth cuts
- High-density tungsten carbide for toughness, wear-resistance, and long life
- Patented body slots reduce vibration for exceptional feel
- Exclusive, patent-pending ToughTrack tooth design for accurate tracking over the life of the blade
-
Features
- 2,071 inch lbs. driving force
- Lower recoil action
- Fitted with points teeth on the contact arm
- Equipped with a nose magnet
- Maintenance free end cap filter
-
$406.99
Features
- Low profile design with enhanced ergonomics and balance for comfort and control
- Powerful enough to drive into engineered lumber
- Industrial grade design for high volume framing and sheathing applications
- Tool free features: depth of drive adjustment, selectable trigger for single drive or multi drive actuation modes, adjustable rafter hook
- High capacity coil magazine
- Recoil dampening engine system for smoother feel, less fatigue and higher productivity
-
$8.79
Features:
- Up to 70% faster cutting compared to standard blades
- High grade Tungsten carbide tips for durability
- Blade coating provides reduced pitch build-up
- Reduced swing width
- Top bevel angle with 23° tip for a smoother cut
