Showing 1–40 of 45 resultsSorted by popularity
-
Features:
- Accessory door fits only Safety Kage4 Model 139-SK-03
- Right-side door with built-in compartment for cartridge-type eye wash station
- Vault hinges enable quick removal and swapping
- Built-in 3-point latching lock handle assembly
- Powder coat Safety Green finish; eye wash station not included
-
Features:
- Interlocking steel panels secure utility cart contents from theft
- 16-gauge steel with tan powder-coat finish for durability
- Installs in under 15 minutes; no cart modifications required
- Recessed padlock design reduces snagging and enhances security
- Grommeted electrical pass-through allows safe internal power routing
- Compatibility: Rubbermaid 9T66-00 and ULINE H-2503XX carts
-
Features:
- Interlocking 16-gauge steel panels secure cart contents
- Installs in 15 minutes or less; no cart modification required
- Recessed padlock design helps prevent theft and snagging
- Grommeted electrical pass-through protects power cords
- Fits Rubbermaid utility cart model 4520-88
- Durable tan powder-coat finish resists chips and scratches
-
Features:
- Type IA duty rating; 300 lb per side
- Dual HolsterTop with paint/tool holders
- Slip-resistant Traction-Tred steps, double riveted
- Heavy-duty internal spreaders and knee-braced steps
- EDGE molded brace with slip-resistant foot pads
- Non-conductive fiberglass rails for work near electricity
-
Features:
- Lift Assist Technology makes extension up to 50% easier to reduce back and arm strain
- Built-in lowering assist for smooth, controlled descent to help prevent slamming and rope burns
- Dual locking system helps prevent ladder extension during transport
- Non-conductive fiberglass rails for use near electricity
- Alflo rung joint for twist-proof performance and slip-resistant tri-rungs
- Dual-action swivel feet with rail shield bracket and shoe for hard or penetrable surfaces
-
Features:
- Base section of the S7900 tapered sectional ladder system; use alone or with S7906-2/S7906-3
- Type IAA, 375 lb duty rating for heavy-duty use
- Exclusive Alflo rung joint for Twist-Proof performance
- Slip-resistant Traction-Tred round rungs and slip-resistant shoe
- Durable fiberglass rails in yellow
-
Features:
- Protects surfaces?helps prevent damage from ladder contact
- Designed for S7906 ladder middle and base sections
- Durable rubber construction; works around electricity
- Blue color for easy identification
-
Features:
- 8 ft Twin Stepladder with Large Platform provides a secure, comfortable work area
- Type IA duty rating supports 300 lb per side for one- or two-person use
- Pinch-Proof platform design for easy opening and closing
- Slip-resistant steps on front and rear sections
- Fiberglass rails are non-conductive for work near electricity
- Aluminum external rail shields help protect against abrasion
-
Features:
- 10 ft reach height with 4 ft platform twin design
- Four spring-mounted casters for easy 360? mobility
- Pinch-Proof platform opens and folds easily
- Slip-resistant Traction-Tred steps on front and rear
- 300 lb duty rating per side; works near electricity with non-conductive fiberglass rails
-
Features:
- 4 ft fiberglass platform twin ladder with 10 ft reach height
- Type IA 300 lb duty rating per side
- Large, secure platform with Pinch-Proof? easy open/close design
- Slip-resistant steps on front and rear sections
- Aluminum external rail shields for abrasion protection; non-conductive rails
-
Features:
- 6 ft Type IA aluminum platform twin ladder with 12 ft reach
- Large, secure platform for comfortable work area
- Pinch-Proof? design for easy opening and closing
- Traction-Tred? slip-resistant steps on front and rear
- Includes four casters for 360? mobility
- 300 lb duty rating per side
-
Features:
- 10 ft reach height with 4 ft ladder size; Type IA 300 lb duty rating
- Large 15 in x 18.5 in standing platform for 360? movement and comfort
- Wraparound multi-functional LOCKTOP guardrail holds tools; Lock-In accessory compatible
- EDGE360 protection with rail shield, bracing and oversized foot pads
- Fiberglass rails with aluminum step bracing; OSHA/ANSI compliant
-
Features:
- 18 ft reach height with 12 ft top step
- Extra-large platform with toe guard for standing comfort
- LOCKTOP extended guardrail organizes tools
- EDGE360 protection with rail shield, bracing, oversized foot pads
- Type IAA 375 lb duty rating
- Casters for easier maneuvering
-
Features:
- Same reach height as a 10 ft stepladder (14 ft reach)
- Extra-large platform with toe guard for ground-like standing
- LOCKTOP extended guardrail organizes tools and adds contact point
- EDGE360 protection with rail shield, bracing, and oversized foot pads
- Type IAA 375 lb duty rating; ideal for fixed-height tasks
-
Features:
- 13 ft reach height with 7 ft top step and Type IAA 375 lb duty rating
- Fiberglass podium design with extra-large platform and toe guard
- LOCKTOP extended guardrail organizes tools and adds contact point
- EDGE360 rail shield, bracing, and oversized foot pads for durability
- Includes casters for easier maneuverability
-
Features:
- Type IA 300 lb duty rating
- 16 ft average reach height; 10 ft top step height
- Extra-large podium platform with toe guard
- LOCKTOP extended guardrail organizes tools
- Factory-installed casters for 360? mobility
- EDGE360 protection with rail shield and oversized foot pads
-
Features:
- 14 ft average reach height; 8 ft ladder height (Type IA)
- Extra-large podium platform with toe guard for comfort
- LOCKTOP extended guardrail organizes tools
- Factory-installed 4 in casters enable 360? mobility
- EDGE360 protection with rail shield, bracing, oversized foot pads
- 300 lb load capacity; slip-resistant Traction-Tred steps
-
Features:
- 7 ft platform height with 13 ft reach (equivalent to 9 ft step ladder)
- Extra-large platform with built-in toe guard for 360? movement
- LOCKTOP extended guardrail organizes tools and provides added contact
- EDGE360 bracing, oversized foot pads, and rail shields for stability
- Fiberglass rails are non-conductive for work near electricity
- Type IA duty rating; 300 lb load capacity
-
Features:
- 9 ft reach height with 3 ft platform height
- Type IA duty rating ? 300 lb load capacity
- Extra-large platform with toe guard for standing comfort
- LOCKTOP extended guardrail organizes tools
- EDGE360 protection with rail shield, bracing, and oversized foot pads
- Factory-installed 4 rubber casters for 360? mobility
-
Features:
- Type IA duty rating, 300 lb load capacity
- Large, comfortable platform with safety guardrail
- Slip-resistant Traction-Tred steps, double riveted and knee braced
- EDGE molded brace and foot pad for enhanced durability
- Non-conductive fiberglass rails for work near electricity
-
Features:
- Type IAA 375 lb duty rating
- Safety guardrail encourages proper ladder use
- Large platform for a secure, comfortable work area
- Slip-resistant Traction-Tred steps, double riveted and knee-braced
- Full set of rear horizontals spaced one per foot
- Heavy-duty internal spreaders and foot bracket with slip-resistant pad
-
Features:
- Type IAA 375 lb duty rating for heavy-duty jobsite use
- HolsterTop with Lock-In System secures tools; includes 3 ToolLasso
- MagnaGrip magnet, parts trays, drill holder, tape measure slot
- Slip-resistant Traction-Tred steps; heavy-duty internal spreaders
- EDGE bracing and shoe pads for durability and stability
- Non-conductive fiberglass rails for working near electricity
-
Features:
- Type IA, 300 lb load capacity
- LOCKTOP ladder top with impact driver slot and tool tether points
- EDGE 360 bracing and fully braced, slip-resistant steps
- Non-conductive fiberglass rails for working near electricity
- 4 ft ladder height; 8 ft 5 in max safe reach
-
Features:
- 5 ladders in 1: Extension, Twin Step, Stairway, 90? wall, and 2 scaffold bases
- Type IAA duty rating with 375 lb load capacity
- 41 adjustable positions for maximum versatility
- POWERLITE rail system for lighter weight and easier handling
- Shatterproof J-locks and impact-resistant push knobs for durability
- Slip-resistant feet and extra-wide flared bottom for stable support
-
Features:
- LEANSAFE ladder top securely leans against walls, corners, poles, and studs; integrated tool slots and holders
- Type IAA 375 lb duty rating for professional use
- Dropped rear rail pivot gets you closer to your work in step ladder mode
- Curved, non-marring feet maximize surface contact; EDGE360 bracing protects ladder feet
- Slip-resistant Traction-Tred steps with heavy-duty internal spreaders
-
Features:
- LEANSAFE ladder top with non-marring bumper and integrated tool holders
- Leans safely on walls, corners, studs, and poles; also functions as a step ladder
- Single-action rail latch keeps ladder in leaning mode
- 300 lb Type IA duty rating; slip-resistant Traction-Tred steps
- EDGE360 bracing and curved footpads for secure footing
-
$741.20
Features:
- Automatic fall arrestor travels up and down the lifeline without user involvement
- Lightweight, fluid movement for unrestricted ladder climbing
- Includes triple-action carabiner for added security
- Includes storage bag
- Energy absorber meets ANSI Z359.13
-
$408.90
Features:
- Complete MEWP safety kit with XXL LiteFit Plus harness, 10 ft Max Patrol SRL, and tool bag
- Class 2 leading-edge rated SRL; ANSI Z359.14-2021 and OSHA compliant
- Harness with back D-ring, foam padding, bright visibility colors
- Patented Relief Handles for “Chair in the Air” suspension relief
- Quick-connect chest buckle and tongue-buckle leg straps
-
Features:
- 12 ft tripod design fits tight spaces with single rear rail
- 300 lb Type IA rating for demanding jobs
- Non-conductive fiberglass rails for work near electricity
- Traction-Tred steps are double riveted and slip resistant
- Convenient spreader handle for easy setup and transport
- External rail shields and full bracing enhance durability
-
Features:
- COMFORTZONE? wide step for 30% larger standing surface
- Type I, 250 lb load capacity
- LOCKTOP? ladder top holds up to 12 tools; lock-in accessory compatible
- Non-conductive fiberglass rails for working near electricity
- EDGE? bracing and extra-large stability feet
- External Pinch-Proof? spreaders and slip-resistant Traction-Tred? steps
-
Features:
- Type IA, 300 lb duty rating for demanding jobs
- Non-conductive fiberglass rails for work near electricity
- Exclusive Alflo? rung joint provides Twist-Proof? performance
- Slip-resistant Traction-Tred? D-rungs
- Compact 3-section design; base and fly sections separate
- Dual-action Shu-Lok? feet for hard or penetrable surfaces
-
Features:
- Type IA, 300 lb duty rating for demanding professional use
- Non-conductive fiberglass rails for working near electricity
- Exclusive Alflo rung joint for Twist-Proof performance
- Slip-resistant Traction-Tred D-rungs and interlocking side rails
- Dual-action swivel feet with SHU-LOK for hard or penetrable surfaces
- Compact 3-section design; base section can be used separately
-
Features:
- 12 ft single-section fiberglass straight ladder
- Type IA duty rating supports up to 300 lb
- Slip-resistant Traction-Tred D-rungs
- Dual-action pivoting feet for hard or penetrable surfaces
- Durable rail shields and shoe brackets
- Non-conductive side rails for work around electricity
-
Features:
- Type IA 300 lb duty rating
- Exclusive Alflo rung joint for Twist-Proof performance
- Slip-resistant Traction-Tred aluminum D-rungs
- Extra heavy-duty I-beam side rails
- SHU-LOK shoes rest flat or spur for various surfaces
- Mar-resistant end caps
-
Features:
- Type IAA 375 lb duty rating
- Non-conductive fiberglass rails for use around electricity
- Slip-resistant Traction-Tred round rungs
- ALFLO rung joint for twist-proof performance
- Dual-action feet with pad and spur for various surfaces
- Pre-pierced holes for easy accessory installation
- Base and fly separate to use base as a single ladder
-
Features:
- Type IAA, 375 lb duty rating
- Fiberglass rails, works around electricity
- Extra heavy-duty aluminum HolsterTop with parts tray and tool slots
- EDGE bracing with slip-resistant foot pads
- Traction-Tred steps with wide knee braces; internal spreaders and external rail shields
-
Features:
- Type IAA 375 lb duty rating
- Non-conductive fiberglass rails for work near electricity
- Extra heavy-duty aluminum HolsterTop with tool slots and holes
- EDGE bracing and external rail shields for durability
- Slip-resistant Traction-Tred steps, double riveted
-
Features:
- Type IAA duty rating supports up to 375 lb
- Non-conductive fiberglass rails for working near electricity
- Extra heavy-duty aluminum HolsterTop with parts tray and tool slots
- EDGE bracing with slip-resistant foot pads and external rail shields
- Traction-Tred steps, double riveted with wide knee braces
-
Features:
- Type IAA, 375 lb duty rating
- LOCKTOP top with Lock-In accessory system
- Impact driver slot and steel plate for magnetic accessories
- Three anchor points for tool tethering
- Non-conductive fiberglass rails for work near electricity
- EDGE bracing and fully braced steps for durability
- Wider base for increased tip resistance
-
Features:
- LOCKTOP? with Lock-In System secures tools to increase productivity
- Impact driver slot safely holds the most frequently used tool
- Steel plate enables use of magnetic accessories
- 3 anchor points for tool tethering to prevent drops
- Non-conductive fiberglass rails for work near electricity
- Fully braced steps and rear horizontals for durability
- EDGE bracing protects rails from damage
- Wider base than code for improved tip resistance
- ANSI A14.5 and OSHA compliant
