Showing 481–517 of 517 resultsSorted by popularity
-
Features:
- Type IA 300 lb duty rating
- LOCKTOP with Lock-In accessory system for tool storage
- Impact driver slot and steel plate for magnetic accessories
- Three anchor points for tool tethering
- Non-conductive fiberglass rails for working near electricity
- EDGE bracing and fully braced steps for durability
-
Features:
- Type IA, 300 lb duty rating
- HolsterTop? with Lock-In System secures tools
- Oversized molded Proguard Boot? for slip-resistant footing
- Double-riveted, slip-resistant Traction-Tred? steps
- Heavy-duty internal spreaders; reinforced top connectors
- Non-conductive fiberglass rails for work near electricity
-
Features:
- Type IA, 300 lb duty rating
- HolsterTop? with Lock-In System keeps tools secure
- Slip-resistant Traction-Tred? steps, double riveted
- Oversized molded Proguard Boot? for firm footing
- Heavy-duty internal spreaders; full rear horizontals
- Non-conductive fiberglass rails for work near electricity
-
Features:
- Type IA duty rating, 300 lb capacity
- HolsterTop? with Lock-In System secures tools
- Slip-resistant Traction-Tred? steps, double riveted
- Oversized molded Proguard Boot? for firm footing
- Heavy-duty internal spreaders; rear horizontals each foot
- Non-conductive fiberglass rails for work near electricity
-
Features:
- Type I, 250 lb duty rating
- HolsterTop with Lock-In System secures tools and accessories
- Slip-resistant Traction-Tred steps and pinch-proof external spreaders
- EDGE bracing with slip-resistant foot pads for durability
- Non-conductive fiberglass rails for use near electricity
-
Features:
- Type II duty rating with 225 lb load capacity
- HolsterTop/LOCKTOP with paint and tool holders; Lock-In accessory compatible
- Slip-resistant Traction-Tred steps and rubber foot pads
- External Pinch-Proof spreaders; EDGE bracing for durability
- Non-conductive fiberglass rails for working near electricity
-
Features:
- Type II, 225 lb duty rating
- HolsterTop with paint/tool holder; Lock-In accessory compatible
- Slip-resistant Traction-Tred steps
- External Pinch-Proof spreaders
- EDGE molded brace and foot pads for durability
- Non-conductive fiberglass rails for work near electricity
-
Features:
- Type IA duty rating supports up to 300 lb
- Heavy-gauge Tool-Tra-Top with parts tray, drill holes, and tool slots
- Slip-resistant Traction-Tred steps; all steps knee-braced
- Full U-channel rear rails with horizontals spaced one per foot
- Heavy-duty internal spreaders; metal feet with rubber pads
-
Features:
- Type IA, 300 lb duty rating
- Heavy gauge Tool-Tra-Top with parts tray, drill and tool slots
- Slip-resistant Traction-Tred steps; all steps knee-braced
- Full U-channel rear rails with horizontals spaced one per foot
- Heavy-duty internal spreaders and slip-resistant foot pad
-
Features:
- Type IAA duty rating supports up to 375 lb
- Heavy-gauge Tool-Tra-Top with parts tray, tool slots and drill holes
- Slip-resistant Traction-Tred steps; all steps knee-braced
- Full U-channel rear rails with horizontals spaced one per foot
- Heavy-duty internal spreaders and slip-resistant foot pads
-
Features:
- Type IAA duty rating ? 375 lb capacity
- Heavy gauge Tool-Tra-Top with parts tray and tool slots
- Slip-resistant Traction-Tred steps; all steps knee-braced
- Heavy-duty internal spreaders
- Full U-channel rear rails; rear horizontals spaced one per foot
-
Features:
- 8 ft Type IAA duty rating (375 lb)
- Heavy gauge Tool-Tra-Top with parts tray, tool slots and drill holes
- Slip-resistant Traction-Tred steps; all steps knee-braced
- Full U-channel rear rails with horizontals spaced one per foot
- Heavy-duty internal spreaders; metal feet with rubber pads
-
Features:
- Type IAA duty rating, 375 lb capacity
- Heavy gauge Tool-Tra-Top with tray, tool and drill holes
- Slip-resistant Traction-Tred steps, all knee-braced
- Heavy-duty external spreaders
- Full U-channel rear rails with horizontals spaced one per foot
-
Features:
- Type IA duty rating supports up to 300 lb
- Lightweight aluminum construction for easy transport
- Tool-Tra-Top with drill holster, tool/paint tray, and small parts storage
- Spill-Proof pail shelf with rag rack holds a gallon paint can and closes with ladder
- Slip-resistant, double-riveted Traction-Tred steps
- H-spreader with hand grip for one-handed carry and closing
-
Features:
- Type I, 250 lb duty rating
- Tool-Tra-Top tray with slots for paint roller tray
- Automatic Spill-Proof pail shelf opens and closes with ladder
- Sturdy molded paint can hanger
- Slip-resistant Traction-Tred steps
-
Features:
- Type I, 250 lb duty rating
- Tool-Tra-Top tray with slots for paint roller tray and tool holes
- Sturdy molded paint can hanger on back of top
- Automatic Spill-Proof pail shelf opens and closes with ladder
- Slip-resistant Traction-Tred steps
-
Features:
- Type IA 300 lb duty rating in a lightweight aluminum design
- Tool-Tra-Top with drill holster and tray for tools/paint and small parts
- Spill-Proof pail shelf with rag rack holds 1-gallon can; closes with ladder
- Slip-resistant, double-riveted Traction-Tred steps
- Full rear horizontals and molded paint can hanger
-
$199.99
Features:
- 10 ft standard flex shaft for concrete vibration equipment
- Assembly includes shaft casing and greased core
- Genuine Northrock replacement part
-
$199.00
Features:
- 1-1/8 in. stroke length and 0–2,900 spm for fast cutting
- LockJaw toolless blade change with one‑hand insertion and spring ejection
- BITURBO Brushless motor optimized for CORE18V High Power batteries
- Variable-speed trigger and orbital mode for wood
- Ergonomic in-line design with Vibration Control and soft grip
- Adjustable, pivoting footplate with on-tool depth key storage
- Built-in rafter hook for quick hang-up between cuts
-
$419.00
Features:
- PROFACTOR performance comparable to a 13-amp corded grinder
- KickBack Control and restart protection for added safety
- BITURBO Brushless motor optimized for CORE18V High Power batteries
- Wheel brake for rapid stop when switch is released
- Multi‑grip no lock‑on paddle switch and Vibration Control handle
- Tool‑free adjustable guard and spiral bevel gears
-
$949.00
Features:
- 9 in. cutting wheel for cuts up to 3.3 in. deep
- 6-position cutting guard for multiple working angles
- Ergonomic wrap-around handle with soft grip for comfort
- Enclosed battery compartment with spring-assisted removal
- Water shut-off valve for concrete applications
- Innovative spindle lock for fast wheel changes
- Includes (2) CORE18V 12 Ah batteries and Turbo charger
-
$419.00
Features:
- 2-Tool 18V Combo – includes GDX18V-1860C impact driver/wrench and GSB18V-975C 1/2 in. hammer drill/driver
- Connected-ready tools – optional/app-enabled modes for control and customization via PRO360/Bosch Toolbox
- Brushless motors – deliver high efficiency and performance
- KickBack Control on drill – helps reduce injury risk in bind-ups; precision clutch with 25 settings
- Impact driver/wrench – three speeds, preset/custom modes, and Auto Bolt Release
- Includes power – (2) CORE18V 4.0Ah batteries and GAL18V-40 charger, plus bag
-
$19.99
Features
- NSF Registered
- OSHA & Regulatory Compliance
- Heavy-Duty Cleaning
- 6002 0046-2 is dermatologically tested to be skin-friendly
-
$532.99
Features
- Breathable polyester mesh
- 2″ two-tone tape for optimum visibility
- Zipper closure
- 2 mic tabs with reinforced stitching
- 2 lower external flap pockets
-
$898.99
Features
- The Makita GT401M1D1 combo kit Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM) provides 1,950 in.lbs. of Max Torque
- Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4″ stroke length for faster cutting
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- The Makita GT401M1D1XPT is engineered to provide increased dust and water resistance in harsh job site conditions
-
![XUC04Z 36V [18V X2] LXT Brushless Material Handling, Dump/Pipe Frame product image](https://www.heydensupply.com/wp-content/uploads/2023/07/0d3acbb5-ee38-41b3-9767-1f29467e885f_xuc05_fc_1500px-600x600.jpg "0d3acbb5-ee38-41b3-9767-1f29467e885f_xuc05_fc_1500px")
$7,571.99
Features
- Makita XUC04Z delivers up to 100 minutes of run time (distance equivalent to 4.5 miles) under load using four 18V LXT® 6.0Ah BL1860 battery (battery not included)
- Holds (4) 18V LXT® Lithium-Ion batteries but operates using (2) 18V batteries at a time; utilizes additional batteries when needed (batteries not included)
- 3 forward speeds with maximum speed over 3 MPH, 1 reverse speed
- Maximum load capacity over 650 lbs
- Telescoping loading platform L(57″-63″)– W (28 ¾”-42 ½”) – H (32 ¼”- 40 ½”)
-
![[Pack of 12] DEWALT DPG740 Fleece Mild Condition Cold Weather Work Glove product image](https://www.heydensupply.com/wp-content/uploads/2023/05/jlkgj6jwwe2npvp7947l-600x600.jpg "jlkgj6jwwe2npvp7947l")
$9.34
Features
- Synthetic Leather Fingertips
- Synthetic Palm Overlay
- Durable Tough Thread Double Stitching
- Extended Cuff
- Wind & Water Resistant Fleece Outer Shell
-
![[3 Pack] Dewalt DPG73L Large Ultradex Smooth Nitrile Dip Glove product image](https://www.heydensupply.com/wp-content/uploads/2023/05/ntx3ckvkraohcszgmalj-600x600.jpg "ntx3ckvkraohcszgmalj")
$5.50
Features
- Nitrile Coating
- Grip and Abrasion Resistance
- 13 Gauge Nylon/Polyester Shell Provides a Lightweight, Breathable Fit
- Elastic Cuff
- Comfortable Fit
-
24% OFF
![XRH011TWX 18V LXT Lithium‑Ion Brushless Cordless 1" SDS‑PLUS Rotary Hammer Kit, w/ HEPA Dust Extractor Attachment [5.0Ah] product image](https://www.heydensupply.com/wp-content/uploads/2023/05/4a4cccb0-7df0-417d-a586-aba9024f6796_xrh011twx_f_1500px-600x600.jpg "4a4cccb0-7df0-417d-a586-aba9024f6796_xrh011twx_f_1500px")
$914.99 Original price was: $914.99.$699.00Current price is: $699.00.
Features
- Limited Stock – Price good until sold out
- Powerful BL™ Brushless motor delivers 0-950 RPM, 0-4,700 BPM and 1.7 ft.lbs. of impact energy to handle the most demanding applications
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- OSHA Table 1 compliant concrete drilling solution with filter cleaning mechanism is designed to help maintain optimum dust suction efficiency
- Extractor is powered by a separate motor to maintain peak drilling performance and provide a 2-second delay to help capture remaining dust
- Efficient HEPA filtration system captures 99.97% of particulates .3 microns and larger
-
$927.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 77″ long
- Weighs only 10.6 lbs. with battery for reduced operator fatigue
-
$681.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
- Compact and ergonomic design at only 77″ long
- Weighs only 10.6 lbs. with battery for reduced operator fatigue (battery not included)
-
$802.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
- Compact and ergonomic design at only 99″ long
- Weighs only 17.2 lbs. with battery for reduced operator fatigue (battery not included)
-
$6.99
Features
- Marking paint covers more linear feet per can than other brands
- Use on grass, gravel, dirt, concrete, asphalt and more
- Precision tip results in virtually no overspray
- Resists early fading and chalking; lasts up to 30 days
![XRH08PTW 36V (18V X2) LXT Brushless 1‑1/8" SDS‑PLUS AVT Rotary Hammer Kit, w/ HEPA Dust Extractor [5.0Ah] product image](https://www.heydensupply.com/wp-content/uploads/2023/05/e119d4e9-a1d2-439f-8139-6b7e33c94188_dx08_a_1500px-600x600.jpg "e119d4e9-a1d2-439f-8139-6b7e33c94188_dx08_a_1500px")
