Showing 1–40 of 115 resultsSorted by popularity
-
$1,179.99
Features:
- 1.0 HP, 115V/6.8A, Single-Phase
- 2 in NPT female discharge
- Max capacity: 95 GPM; Total head: 45 ft
- Handles up to 1 in solids; Pumps liquid up to 120°F
- Cast iron housing and abrasion‑resistant impeller
- Built-in thermal overload protection
- Dual shaft seals and sealed ball bearings
- Carrying handle and molded power cable with strain relief
-
Features:
- Heavy-duty 16-gauge steel, fully arc-welded
- Sloped chest design for secure jobsite storage
- Powder coat finish for corrosion resistance
- Ergonomic recessed handles
- Pre-punched for optional Power Pass grommet
-
Features:
- Heavy-duty 16-gauge steel with fully arc-welded seams
- One-time installation lock system (locks not included)
- 1/4 in solid lock tangs resist pry bars
- Powder coat finish for corrosion protection
- 7-gauge one-piece steel skids for strength and stability
- Ergonomic recessed handles with 90° stops
- Dual lift-assist gas springs with guards
- Pre-punched for optional Power Pass grommet
-
Features:
- Heavy-duty 16-gauge steel construction with fully arc-welded seams
- One-time installation lock system resists break-ins (locks not included)
- 1/4-inch solid lock tangs provide pry bar resistance
- Staked and welded hinge for durability
- Powder coat finish for corrosion protection
- Solid 7-gauge steel skids for strength and stability
- Ergonomic recessed handles with 90-degree stops
- Locking spreader secures lid open to prevent accidental closure
- Pre-punched for optional Power Pass grommet for charging tools inside
-
Features:
- Quick access while keeping truck bed open
- Durable 14-gauge steel construction
- Easy-to-use T-cup handle
- Protective powder coat finish
- 60 x 12 x 16 inch size
-
Features:
- Maximized mobility with oversized 8 in rubber wheels, swivel and locking casters
- Durable construction with thicker walls/legs and 3-year warranty
- Secure storage via 16-gauge armored steel panels and lockable full-framed doors
- Integrated tray compartments and elevated work platform
- Electrical cord pass-through with rubber grommet
-
Features:
- Interlocking steel panels secure utility cart contents from theft
- 16-gauge steel with tan powder-coat finish for durability
- Installs in under 15 minutes; no cart modifications required
- Recessed padlock design reduces snagging and enhances security
- Grommeted electrical pass-through allows safe internal power routing
- Compatibility: Rubbermaid 9T66-00 and ULINE H-2503XX carts
-
Features:
- Interlocking 16-gauge steel panels secure cart contents
- Installs in 15 minutes or less; no cart modification required
- Recessed padlock design helps prevent theft and snagging
- Grommeted electrical pass-through protects power cords
- Fits Rubbermaid utility cart model 4520-88
- Durable tan powder-coat finish resists chips and scratches
-
Features:
- 57.5 cu ft storage with full-width interior shelves
- Integrated 44 in heavy-duty ramp for loading bulky equipment
- WATCHMAN4 IV Lock System with 3-point latch and 7-ga reinforced housing
- 16-ga steel construction with powder-coat finish for durability
- 4-way, 7-ga skids for access from any side; recessed handles
- Power Pass4 electrical pass-thru for weatherproof cord access
- Dual gas springs and heavy-duty piano hinge for smooth, secure operation
- Includes 2 KNAACK padlocks fitting the lock box
-
Features:
- 57.5 cu ft capacity for tools and supplies
- Bi-fold cover opens upward for unrestricted access
- Full-width interior shelves for organized storage
- Watchman® IV lock system with 3-point latch and reinforced housing
- Power Pass® electrical pass-thru for safe cord access
- Durable tan powder-coat finish resists corrosion
- Heavy-duty piano hinge and recessed handles
- 4-way skids allow access from any side
-
Features:
- 38.2 cu ft storage fits full-size pickup beds
- WATCHMAN® IV Lock System with 7-gauge reinforced lock housing
- Heavy-duty 16-ga steel, powder-coat finish
- Bi-fold lid with dual gas springs for unrestricted access
- Full-width interior shelves for organization
- Power Pass® electrical pass-thru grommet
- 4-way 7-ga skids and recessed side handles
- Includes 2 KNAACK padlocks
-
Features:
- 35.3 cu ft storage with full-width interior shelves
- WATCHMAN IV Lock System with recessed lock housing; KNAACK Padlock included
- Bi-fold lid opens fully for unrestricted access; 66 in open height
- 16-ga steel body, heavy-duty piano hinge, powder-coat tan finish
- Power Pass Electrical Pass-Thru for safe cord access
- 4-way 7-ga skids and recessed side handles for easy transport
-
Features:
- 3,400 lb load capacity
- Heavy-duty 12-ga steel body with 7-ga top and bottom
- Patented WATCHMAN IV Lock system; includes 2 KNAACK padlocks
- 13 sq ft work surface at 34 in height
- Includes 8 in casters (2 swivel, 2 rigid)
- Powder-coat finish for durability and corrosion resistance
- Multiple drawers with ball-bearing glides
-
Features:
- WATCHMAN IV Lock System with 3-point latch and reinforced lock housing
- 16-gauge steel with fully arc-welded seams and powder coat finish
- Full-length piano hinge and ergonomic lid opens on three sides
- Dampening spring prevents lid slamming for added safety
- Heavy-duty recessed side handles and caster-ready 7-gauge skids
- Power Pass electrical grommet for weatherproof cord access
-
Features:
- WATCHMAN IV Lock System with reinforced housing for theft prevention
- Heavy-duty 16-gauge steel with fully arc-welded seams
- Ergonomic lid opens from three sides for easy access
- Power Pass Electrical Pass-Thru for safe, weatherproof cord access
- Recessed side handles and 4-way skids for protected, easy transport
- Powder coat finish for durability and corrosion resistance
-
Features:
- WATCHMAN IV Lock System with 2-point latch and 7-gauge reinforced lock housing for theft prevention
- Includes KNAACK Padlock that fits the lock box; interchangeable tumblers
- 16-gauge steel construction with fully arc-welded seams
- Ergonomic lid opens from three sides
- Heavy-duty recessed side handles for protected transport
- Powder coat finish for durability and corrosion resistance
-
Features:
- 24.5 cu ft capacity in a heavy-duty steel chest for maximum storage
- WATCHMAN IV 3-point latch with reinforced lock housing for superior security
- Full-length piano hinge and ergonomic lid with dampening spring for safe, easy access
- Power Pass Electrical Pass-Thru grommet for weatherproof cord access
- 4-way pre-punched 7-ga skids and recessed side handles for easier transport
- Powder-coat finish and fully arc-welded seams for durability
-
Features:
- Industry-first safety storage for fall and personal protective equipment
- Watchman IV 3-point latch with recessed lock housing
- KNAACK Padlock included fits perfectly in lock box
- Power Pass grommeted shelving for power distribution on every shelf
- 16-ga steel body, 7-ga skids with powder coat finish
- Protected exterior storage for fire extinguisher, first-aid kit, eyewash station
- Pre-punched skids for optional casters; foot latch opens both doors
-
Features:
- WATCHMAN IV Lock System with 3-point latch and recessed lock housing
- Heavy-duty 16-gauge steel with fully arc-welded seams
- 4-way, 7-gauge skids for access from any side
- Full-length top shelf plus adjustable shelves and latching drawers
- Powder coat finish for durability and corrosion resistance
- Foot latch for hands-free door opening; recessed side handles
-
Features:
- 47.5 cu ft capacity with three left-side shelves and open right-side storage
- WATCHMAN IV 3-point lock with recessed housing for theft resistance
- 16-ga steel construction with fully arc-welded seams and powder coat finish
- 4-way 7-ga skids and recessed side handles for easier, safer transport
- Pre-punched skids for optional caster installation
- Includes KNAACK padlock for secure locking
-
Features:
- Designed to fit most Werner extension ladder profiles
- Dual clamping system locks rail extensions for stability
- Wide base increases contact area when transitioning
- Rung latch spring mechanism secures to ladder
- Meets OSHA 1910 & 1926 compliance standards
-
Features:
- Aluminum toeboard assembly for Wide Span scaffolds
- Provides added edge protection on platforms
- Toeboards extend 3.5 in above platform surface
- Durable, lightweight construction
-
Features:
- Wide Span 6ft toeboard assembly for scaffold platforms
- Aluminum construction
- Provides added edge protection
- Toeboards extend 3.5 inches above platform surface
-
Features:
- Aluminum construction for flexible, durable scaffold setups
- Adds edge protection; toeboards extend 3.5 in above platform
- Compatible with Wide Span scaffold systems
- Components available separately for easy configuration
-
Features:
- Provides added protection on scaffolding
- Toeboards extend 3.5 inches above platform surface
- Durable aluminum construction
-
Features:
- Type IA duty rating ? 300 lb capacity per side
- Fiberglass rails are non-conductive for work near electricity
- Heavy-gauge aluminum top; heavy-duty internal spreaders
- EDGE bracing and external rail shields for durability
- GLAS*MARK violator stripes improve ladder visibility
- Designed for one or two-person jobs
-
Features:
- 60 ft of 3/16 in galvanized steel cable
- Raises and lowers loads up to 450 lb
- Hoist for materials only; personnel prohibited
- Requires T510080B and T100008B brackets to mount on T100108 tripod
- Meets ANSI A10.5 and OSHA standards
-
Features:
- Fits Werner 6 ft SRS-72 Steel Rolling Scaffold
- Locking casters swivel for 360-degree mobility
- Set of four casters; black/chrome finish
- 1,000 lb load capacity (evenly distributed)
-
Features:
- Single top end cap for S7706-1 fiberglass interchangeable Parallel Sectional Ladder
- User-installed accessory for ladder protection
- Durable construction with protective top loop
- Compact and lightweight for easy handling
-
$279.00
Features:
- 11 ft UHMWPE/polyester web lifeline
- Aluminum housing with swivel top
- Aluminum rebar hook and steel carabiner
- Maximum arrest distance 24 in; ANSI Z359.14-2021 Class 1, OSHA compliant
- Compact, 4.8 lb unit for personal fall protection
-
$775.80
Features:
- Leading Edge Class 2 SRL for steel beam, precast concrete, and b-deck applications
- 6 ft exclusive blend Kevlar and UHMWPE webbing with thermoplastic housing
- Backpack Style Energy Absorber; steel harness web connector for quick attachment
- Aluminum rebar hook with 2.5 in gate opening; recessed labels for inspection
- Less than 24 in minimum arrest distance when used overhead
-
$417.00
Features:
- Compact twin-leg SRL with 6 ft UHMWPE web lifelines
- Class 1 device limiting arrest distance to 24 in
- Average arrest forces held to 900 lb
- Steel form rebar hooks and swivel top
- High-impact nylon housing; supports up to 400 lb
- Meets ANSI Z359.14-2021 and OSHA 1910.140/1926.502
-
$207.00
Features:
- 11 ft web working length for freedom of movement
- Class 1 overhead use with 24 in maximum arrest distance
- Steel form hook and steel carabiner connectors
- WebAlert inspectable webbing in UHMWPE/polyester for high visibility
- Lightweight, compact thermoplastic housing; rated up to 400 lb
- Meets ANSI Z359.14-2021 and OSHA 1910.140/1926.502
-
$203.00
Features:
- Lightweight, compact 6 ft UHMWPE web lifeline
- Class 1 device limits max arrest distance to 24 in with ~900 lb average arrest force
- Steel form rebar hook and included carabiner; swivel top housing
- High-impact nylon housing; durable labels and shock pack cover
- Meets ANSI Z359.14-2021 Class 1 and OSHA 1910.140/1926.502
-
$376.00
Features:
- 6 ft exclusive blend Kevlar and UHMWPE webbing
- Class 2 Leading Edge rated; tested over steel beam, precast concrete, and b-deck
- Backpack Style Energy Absorber for ultra-lightweight, compact design
- Steel Form Hook and steel harness web connector for quick attachment
- Less than 24 in Minimum Arrest Distance when used overhead
- Durable thermoplastic housing with recessed labels
- Meets ANSI Z359.14-2021 Class 2; OSHA 1910.140 & 1926.502
-
$754.00
Features:
- Leading Edge Class 2 SRL tested and approved for use over steel beam, precast concrete, and B-deck
- 50 ft of 3/16 in galvanized steel cable with polyester shock pack
- ThermoPlastic housing with recessed labels and durable cover
- Carrying handle for easy transport; steel swivel snap hook and carabiner
- Maximum arrest distance less than 32 in when used overhead
- Meets ANSI Z359.14-2021 Class 2 and OSHA 1910.140/1926.502
-
$570.00
Features:
- Class 2 Leading Edge SRL tested and approved for steel beam, precast concrete, and b-deck
- 30 ft galvanized steel cable with polyester shock pack and polymer housing
- Compact, lightweight design with integrated carrying handle
- Minimum arrest distance less than 24 in when used overhead
- ANSI Z359.14-2021 Class 2; OSHA 1910.140 & 1926.502 compliant
-
$439.00
Features:
- Class 1 SRL for overhead anchorage
- 30 ft galvanized steel cable with swivel snap hook
- Lightweight, compact housing with carry handle
- 24 in maximum arrest distance for low clearance
- Durable recessed labels aid inspection
- Meets ANSI Z359.14-2021 and OSHA 1910.140/1926.502
-
$516.00
Features:
- Class 2 leading edge approval for steel beam, precast concrete, and b-deck
- 20 ft galvanized steel cable with polyester shock pack
- ThermoPlastic housing with recessed labels for inspection
- Carry handle for easy transport
- Maximum arrest distance under 24 in when attached overhead
- Meets ANSI Z359.14-2021 and OSHA 1910.140/1926.502
-
$375.00
Features:
- Class 2 Leading Edge SRL tested over steel beam, precast concrete, and b-deck
- 8 ft galvanized steel cable with ThermoPlastic housing
- Backpack Style Energy Absorber; steel swivel snap hook
- Steel harness web connector for quick attachment
- Maximum arrest distance less than 24 in when used overhead
- ANSI Z359.14-2021 Class 2; OSHA 1910.140 & 1926.502 compliant
