Showing all 20 resultsSorted by popularity
-
$592.39
Features:
- 2 HP electric motor with rugged shock-absorbing frame
- 115V, 15A with watertight, strain-relief power cord
- Drives up to 2-1/2 in max head; shafts up to 60 ft (with connector)
- Cast aluminum housing dissipates heat; serviceable parts accessible
- Motor only; flexible shafts and heads sold separately
-
$2,439.00
Features
- 15 AMP breaker hammer motor which delivers 53.9 ft.lbs./72.8 joules of impact energy
- Advanced AVT® Vibration Reduction Technology
- L.E.D. service light notifies the user approximately 8 hours before brushes need to be replaced
-
$347.99
Features
- Dust extraction shroud is designed to capture dust during concrete surfacing applications
- Powerful 15.0 AMP motor delivers 6,600 RPM for optimum durability and performance
- Anti-restart protection is designed to prevent motor start up in the on-power switch position after a power disruption
- Power light indicates switch failure, cord damage or worn-out motor brushes
- Loop handle can be held at multiple positions for increased comfort in various orientations
- Rear handle trigger switch with lock-off feature requires two actions to power on
-
$256.99
Features
- Electric brake for maximum productivity
- Magnesium components create a lightweight saw (10.6 lbs.) that’s well-balanced and job site tough
- Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and job site durability
- Large cutting capacity (2-1/2″ at 90°) and bevel capacity (0°-56°) with positive stops at 22.5°, 45°, and 56°
- Large rubberized levers for quick and easy one-handed adjustments
-
$351.99
Features
- Powerful 15 AMP motor delivers 3,800 RPM for superior performance and durability
- “Tool-less” flange removal for quick and easy blade and wheel changes
- Extra-large spark guard captures and deflects debris away from the surrounding area
- Large cutting capacity; cuts up to 5″ round and 4″ x 7-5/8″ rectangular
- “Tool-less” fence adjustment up to 45º for faster and more accurate angle cuts; adjusts to 3 locations for various material sizes
- “Tool-less” vice adjustment for quick and easy clamping of material
- Locking pin secures cutting head in down position for easy transport and storage
- Stamped steel base provides added rigidity for increased durability
-
$659.99
Features:
- 2 HP, 15 amp electric motor for concrete vibration
- Durable cast aluminum housing dissipates heat
- Shock-absorbing frame with protected power switch
- Watertight, strain-relief power cord
- Drives heads up to 2.5 in diameter (shafts & heads sold separately)
-
$1,999.00
Features:
- Active Vibration Control reduces vibration via an air-cushion mechanism and shock-absorbing handles
- 43 Ft.-Lbs. impact energy with 1,000 BPM for fast concrete removal
- Ergonomic handle design for comfort and control during all-day applications
- Grease-packed gearbox and hammer mechanism for durability
- Service Minder Brush System indicates preventative maintenance
- Includes deluxe hammer cart, two narrow chisels, and two star point chisels
-
$199.00
Features:
- Robust 15 Amp motor delivers fast cutting performance with high overload capacity
- 5 in. cutting capacity for larger ferrous metal workpieces
- Adjustable fence with miter angle provides 0–45° left cuts and three mounting locations
- 4,100 no-load RPM for smooth, accurate cuts
- Adjustable spark guard helps control spark direction for user protection
- Ergonomic, moderate 31 lb design for comfortable, ambidextrous use and easy transport
-
$129.00
Features:
- 15 Amp high-output motor for fast, smooth cutting
- Die-cast magnesium footplate for durability and flatness
- 56° bevel capacity with detents at 22.5° and 45°
- Anti-snag lower guard and optimized sight lines
- Soft-grip handle, spindle lock, and 10 ft cord
-
$276.75
Features:
- Lightweight magnesium construction reduces user fatigue
- 15 Amp motor delivers power for tough cuts
- Blade-left worm drive design for clear cut-line visibility
- 53° bevel capacity with positive stop at 45°
- Anti-snag lower guard for smooth small cut-offs
- Spindle lock and large levers for quick blade and setting changes
- Built-in saw hook for convenient storage between cuts
-
$179.00
Features:
- 15-amp motor with 6,500 no-load RPM for demanding grinding and cutting
- Lock-on/off switch for extended-use applications
- Service Minder brushes stop the tool when maintenance is required
- 5/8 in.-11 spindle fits most common accessories; spindle lock for quick wheel changes
- Adjustable handle position for better control
-
$278.99
Features
- The Makita GA4591 Powerful 15 AMP motor delivers more output and variable (2,800 – 11,500) RPM
- SJS™II provides reduced vibration for increased operator comfort during extended use
- Vibration absorbing side handle provides increased comfort on the job
- Mechanical brake stops the wheel in under 2.5 seconds
GA4591 Tech sheet
-
$308.99
Features
- The Makita GA5093 has a Powerful 15 AMP motor delivers more output and variable (2,800 – 11,500) RPM
- SJS™II provides a leaf spring and cam gear drive mechanism that is engineered to reduce vibration for increased operator comfort during extended use
- Vibration absorbing side handle provides increased comfort on the job
- Mechanical brake stops the wheel in under 2.5 seconds
- Electronic controller provides constant speed control which automatically applies additional power to the motor to maintain speed under load
-
$278.99
Features
- Rear handle trigger switch with lock-off feature that requires two actions to start the grinder
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Redesigned motor with greater armature stability and larger commutator bars for 3 times longer life compared to previous model
- Zig-zag epoxy on both sides of the armature coil and a powder-coated field for added protection from dust and debris for longer motor life
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
-
$335.71
Features
- Powerful 15.0 AMP motor delivers 6,600 RPM for faster material removal
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Rotatable back handle for increased comfort in various orientations
- “Tool-less” wheel guard for more convenient adjustments
- Three position vibration absorbing side handle for increased comfort
-
$202.99
Features
- Hypoid gears deliver more power and have greater surface contact than conventional worm drive gears
- Powerful 15 AMP motor for increased productivity
- Oil bath technology and sealed gear housing for less maintenance
- 0°-51.5° bevel capacity with positive stops at 45° and 51.5° is ideal for truss and rafter cut-outs
- High quality, heat treated hypoid gears are engineered for long lasting performance
-
$1,292.99
Features
- Makita 5402NA features a powerful 15 AMP motor and delivers 2,300 RPM for enough power to cut through pressure treated lumber
- Cuts 6x material at 90° and 4x material at 45° in a single pass
- Weighs only 32.1 lbs. for increased operator comfort
- Electric brake for maximum productivity
- Ideal for cutting large timber, pressure treated lumber and wood logs
-
$341.99
Features
- Magnesium components create a lightweight saw (11.4 lbs.) that is well balanced and job site tough
- Large cutting capacity (3″ at 90°) and bevel capacity (0°-50°) with positive stops at 22.5° and 45°
- Two built-in L.E.D. lights illuminate the line of cut for increased accuracy
- Electric brake for maximum productivity
- Powerful 15.0 AMP motor delivers 5,200 RPM for proven performance
-
$195.00
Features
- Magnesium components create a lightweight saw (10.6 lbs.) that is well balanced and jobsite tough
- Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and job site durability
- Large cutting capacity (2-1/2″ at 90°) and bevel capacity (0°-56°) with positive stops at 22.5°, 45°, and 56°
- Large rubberized levers for quick and easy one-handed adjustments
- Ergonomically designed rubberized handle for better fit and added comfort
-
$222.99
Features
- Powerful 15 AMP motor delivers 5,800 RPM for proven performance and job site durability)
- Electric brake for maximum productivity)
- Lower guard design improves performance when making bevel and narrow cuts)
- Large cutting capacity (2-3/8″ at 90°, 1-3/4″ at 45°))
- Two built-in L.E.D. lights illuminate the line of cut for increased accuracy)
