Showing 1–40 of 7304 resultsSorted by popularity
-
$0.94
Features:
- LU-series hangers are tested, load rated and code compliant
- The LU series installs using several fastener selections with tested allowable loads
- Precision-formed engineered for installation ease and design value
- Seat width: 1-9/16 in.
- Nominal joist size: 2×8, 2×10
-
![TW1061T-USA [Roll]](https://www.heydensupply.com/wp-content/uploads/2020/11/TW1061T-1000x1000-1-600x600.jpg "TW1061T-USA [Roll]")
$319.34
Features:
- Full Case Containing 30 Rolls of Tie Wire
- Buy from an authorized Max USA Master Distributor
- Annealed steel wire – diameter 1.0mm
- For use with MAX RB441T TwinTier, RB611T, and RB401T-E TwinTier
-
$8.49
Features
- Radians RWG538 is made out of 18 gauge green High Performance Polyethylene (HPPE) provides cut resistance
- Black foam nitrile palm coating with PVC dots improves abrasion in wet or dry conditions
- Seamless cuff design provides a comfortable fit
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 3 4 1)
- Reinforced thumb crotch for more strength | ANSI Cut Level A2
-
$1.89
Features:
- LUS28Z offers patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×8 and 2×10
-
![G-Tek 34-500V Seamless Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers - Vend-Ready [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/34-500V-Shrink-Wrapped-600x600.jpg)
![G-Tek 34-500 Seamless
Knit Nylon Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers
[1 dozen] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/34-500-UP-600x600.jpg "34-500-UP.jpg")
$2.59
Features:
- Vend pack ready for PPE vending machines
- Seamless knit nylon shell
- Knit Wrist helps prevent dirt and debris intrusion
- Color coded hems for easy size identification
- Washable, resistant to chemicals, water, and ultraviolet light
- Breathable glove shell
-
$0.65
Features:
- Embossments in bend line strengthen connection
- H2.5AZ top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
$0.89
Features
- Super soft Jelli Snug Plugs are washable and reusable
- FDA approved materials are non-toxic
- This product is made in the USA
- Available with or without nylon cord
- NRR 28 dB
-
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- Spacing: 6 x 6
- W/D Designation: W2.9/W2.9
- Gauge: 6/6
- Weight: 42LBS
-
$1.13
Features:
- MAB15Z anchors mudsill to concrete block, poured walls or slab foundations
- Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
$5.19
Features
- The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- Can be installed using nails or Strong-Drive SD Connector screws.
-
$6.99
Features
- HPPE outer shell with fiberglass
- Black foam nitrile coated palm
- Seamless cuff design
- Load weight of 1510g
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 5 4 4)
-
-
$0.52
Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Features
- RWG701 is ANSI Cut Level A4
- Free of Fiberglass or Stainless Steel
- EN388:4X43D
-
$3.77
TURTLE BACK SPONGE
Minimum order quantity: 24
Order in multiples of: 24
-
$4.62
Features
- 13 GA nylon HPPE/Fiberglass shell
- DPG860 features PU palm coating for oil and water resistance
- Seamless knit cuff for a comfortable fit
- Touchscreen capability glove
- ANSI/ISEA Cut Level A5 , Meets EN 4X42E
-
$4.07
Features:
- An indented embedment line ensures accurate embedment depth
- The HETA24 is compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 20-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
![Boss 30SI Cotton Corded Double Palm Glove with Nap-In Finish - Rubberized Safety Cuff [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/30SI-600x600.jpg)
$3.85
Features:
- 2-Ply, 20 Oz. 100% Cotton Boss Cord?
- Clute Cut Design
- Rubberized, Water Resistant Safety Cuff
- Straight Thumb
-
![Boss 1UH7802 Hi-Vis Seamless Knit Polyester Glove with Nitrile Coated Smooth Grip on Palm & Fingers [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/1UH7802_2-600x600.jpg)
$1.29
Features:
- High-Vis Polyester Shell for Comfort & Hand Awareness
- Black, Smooth Coated Nitrile Palm Dip Hides Dirt
- Good Abrasion & Light Oil Resistance
- Knit Wrist
Minimum order quantity: 12
Order in multiples of: 12
-
$18.00
Features
- AT3G10 offers excellent for use in cold weather conditions or applications where fast cure is required
- Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
- Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
- Base material installation temperatures down to 0°F (-18°C)
- Use in grout-filled CMU construction
-
$7.59 – $8.29Price range: $7.59 through $8.29
Features
- ANSI Z87.1 Compliant
- Fits over your glasses for great debris protection
- Black Wire Mesh front eye protection designed for extremely humid environments
- Wire mesh lenses do not meet impact rating (+) requirements
-
$2.74
Features
- Enhanced Stiffness
- Easy Installation
- H10A is made from 18-gauge steel for reliable strength
-
$0.79
Features
- Super soft Jelli Snug Plugs are washable and reusable
- FDA approved materials are non-toxic
- This product is made in the USA
- Flip-top case conveniently stores plugs
- Custom imprinting available on case top
-
$2.09
Features
- More Cuts. Fewer Wheels.TM
- 50% Longer Life, Replace less often with Temper Point grains that are tougher and razor sharp. Better adhesion between the coated grains and resin creates a longer lasting cutting edge that wears
- Extremely Versatile: Efficiently cut a wide range of metals including carbon steel, stainless and nickel-based alloys.
- Aggressive Cutting Action: Make fast cuts with a thin wheel design and high-grain concentration.
- Durable By DesignTM: Built with two sheets of fiberglass for wheel strength. Designed to reduce wheel breakage.
-
$0.74
Features:
- MP24 is versatile and easy-to-use mending plate for wood-to-wood connections
- These non-structural connectors are ideal for general fix-up work
- Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
- Used for non-structural applications only (not for truss applications)
- Width: 2 in.
-
$5.79
Features:
- THA418 offers extra-long straps for height adjustability and top-flange installation
- Zinc Galvanized, G90 Finish
- Top-flange or face-mount installation
Wood Construction Connectors Resources
-
$3.39
Features
- APLH24R offers a concealed-flange design
- Easy installation
- Durable & strong
- Corrosion-resistant finish
-
![Boss 1BC5510 Regular Grade Chore Glove with Double Layer Palm, Cotton Back and Nap-Out Finish - Rubberized Safety Cuff [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/1BC5510-600x600.jpg)
$4.19
Features:
- Breathable Cotton Back
- Clute Cut Design
- Rubberized Safety Cuff
- Straight Thumb
- 2-Ply Quilted Palm
-
$8.59
Features
- Touchscreen Capabilities in all fingers
- 18 gauge gray High Performance Polyethylene (HPPE) shell with Stainless Steel provides cut resistance
- Black PU palm coating provides protection from abrasion in wet or dry conditions
- Seamless design provides a comfortable fit|ANSI Cut Level A5
- ANSI Abrasion Level 3
-
![West Chester 713HGWUB Seamless Knit HPPE Blended Glove with
Impact Protection and Polyurethane Coated Palm & Fingers ANSI A2 Cut
Resistance [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/713HGWUB-600x600.jpg)
$10.59
Features:
- Seamless construction offers increased comfort and breathability
- HPPE blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
- Thermo Plastic Rubber (TPR) back-of-hand impact resistance to knuckles and fingers by dispersing impact force energy away from the bone, without sacrificing dexterity
- Knit Wrist helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
- Washable, resistant to chemicals, water, and ultraviolet light
-
$3.49 – $3.89Price range: $3.49 through $3.89
Features
- Crossfire 24Seven ultra Lightweight, Single Lens Design for additional coverage
- Flexible Temples for all day comfort
- The Crossfire 24Seven hard coat polycarbonate lens protects against scratches
- Provides 99.9% UVA and UVB protection
- Complies with ANSI Z87.1 standards
-
-
$5.93
Features
- Split Cow Hide leather Fingers
- Palm Overlay
- Short Slip-on Cuff
- Lightweight
- Breathable Spandex
-
$25.99
Features:
- 8in Wide by 18 Inches Long
- Bar Mount On 48 Inch Power Trowel Machines
- Box of 4 Trowel Blades
- Longest Lasting Silver Blades
-
![Boss 1UR1115 Unsupported Latex, Unlined with Crinkle Grip - 18 Mil [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/1UR1115-600x600.jpg)
$5.39
Features:
- 18 Mil Natural Latex
- Crinkled Latex Grip
- 13″ Rolled Cuff
-
$4.29
Features:
- Breathable Cotton Back
- Clute Cut Design
- Rubberized Gauntlet Cuff
- Straight Thumb
- 2-Ply Quilted Palm
-
![Boss 1BC0313 Premium Grade Chore Glove with Single Layer Palm,
Single Layer Back and Nap-Out Finish - Knit Wrist [1 pair] product image](https://www.heydensupply.com/wp-content/uploads/2023/02/1BC0313-600x600.jpg)
$3.79
Features:
- Clute Cut Design
- Double Woven, 18 oz. Fleece-Out Cotton
- Knit Wrist
- Straight Thumb
-
$3.49
Features:
- Fully Coated, Double Dipped PVC
- Jersey Lined
- Sandy Grip
- 12″ Long
- Sanitized? Treated
-
![TW1061T-USA [Roll]](https://www.heydensupply.com/wp-content/uploads/2020/07/TW1061T-USA-Front-1-600x600.png "TW1061T-USA [Roll]")
$370.85
Features:
- Wire steel is melted, annealed, and drawn in the U.S.A
- Steel mill certification available
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
$4.09
Features
- APLH26 offers a concealed-flange design
- Durable & Corrosion-Resistant
- Easy Installation
- Strong structural support
