Showing all 15 results

  • [5 Pack] Simpson Strong-Tie THD75500HMG Titen HD 3/4 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $47.92

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [20 Pack] Simpson Strong-Tie THD50500HMG Titen HD 1/2 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $92.62

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [20 Pack] Simpson Strong-Tie THD50612HMG Titen HD 1/2 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $114.77

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [5 Pack] Simpson Strong-Tie THD501200HMG Titen HD 1/2 in. x 12 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $67.15

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [10 Pack] Simpson Strong-Tie THDB62800HMG Titen HD 5/8 in. x 8 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $118.46

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [20 Pack] Simpson Strong-Tie THD50400HMG Titen HD 1/2 in. x 4 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $82.15

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [50 Pack] Simpson Strong-Tie THD37500HMG Titen HD 3/8 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $166.15

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [5 Pack] Simpson Strong-Tie THD75100HMG Titen HD 3/4 in. x 10 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $94.62

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [10 Pack] Simpson Strong-Tie THDB62600HMG Titen HD 5/8 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $74.46

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [10 Pack] Simpson Strong-Tie THDB62612HMGF1 Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $43.00

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [20 Pack] Simpson Strong-Tie THD50500HC20 Titen HD® 1/2 in. x 5 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $54.68

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [5 Pack] Simpson Strong-Tie THDT75600HMG Titen HD 3/4 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $54.85

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [50 Pack] Simpson Strong-Tie THD37300HMG Titen HD 3/8 in. x 3 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $72.85

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [50 Pack] Simpson Strong-Tie THD37400HMG Titen HD 3/8 in. x 4 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $90.00

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [10 Pack] Simpson Strong-Tie THDB62612HMG Titen HD 5/8 in. x 6-1/2 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $105.69

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done