Showing 1–40 of 97 results

  • Simpson Strong-Tie H2.5A H2.5A 18-Gauge Galvanized Hurricane Tie

    Standard Shipping

    $0.52

    Features:

    • Embossments in bend line strengthen connection
    • The top flange features an arrow line indicator to aid correct installation
    • Made from 18-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Simpson Strong-tie H2.5A Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie H2.5AZ H2.5A 18-Gauge ZMAX Galvanized Hurricane Tie

    Standard Shipping

    $0.65

    Features:

    • Embossments in bend line strengthen connection
    • The top flange features an arrow line indicator to aid correct installation
    • Made from 18-gauge steel
    • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
    Simpson Strong-tie H2.5AZ Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie HETA24 HETA 24 in. Galvanized Heavy Embedded Truss Anchor

    Standard Shipping

    $4.07

    Features:

    • An indented embedment line ensures accurate embedment depth
    • Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
    • Load rated for wind and seismic forces
    • 20-in. exposed length
    • Embed 4 in. into a poured concrete bond beam or grouted block wall
    Simpson Strong-tie HETA24 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LU28 LU Galvanized Face-Mount Joist Hanger for 2×8

    Standard Shipping

    $0.94

    Features:

    • LU-series hangers are tested, load rated and code compliant
    • The LU series installs using several fastener selections with tested allowable loads
    • Precision-formed engineered for installation ease and design value
    • Seat width: 1-9/16 in.
    • Nominal joist size: 2×8, 2×10
    Simpson Strong-tie LU28 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie MAB15Z MAB 13-1/8 in. ZMAX Galvanized Mudsill Anchor

    Standard Shipping

    $1.13

    Features:

    • Anchors mudsill to concrete block, poured walls or slab foundations
    • Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
    • Made from 18-gauge steel
    • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications

     

    Simpson Strong-tie MAB15Z Product Page
    Add To CartLoading Done
  • AT-XP Acrylic AT-XP10 10oz

    Simpson Strong-Tie AT-XP10 AT-XP 9.4 oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    Standard Shipping

    $29.10

    Features:

    • 10:1 two-component high-strength, acrylic-based anchoring adhesive
    • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete as well as masonry
    • Easy hole-cleaning procedure ? no power-brushing required
    • Suitable for use in dry or water-saturated concrete
    • Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge

     

    Simpson Strong-tie AT-XP10 Product Page
    Add To CartLoading Done
  • DIAB50 Simpson drop-in anchor

    Simpson Strong-Tie DIAB50 DIAB Drop-In Internally Threaded Anchor for 1/2-in. Rod

    Standard Shipping

    $0.43

    Features:

    • Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
    • Positive-set marking system indicates when anchor is properly set
    • Zinc-plated carbon steel
    • Length: 2 in.
    • Drill bit diameter: 5/8 in.
    Simpson Strong-tie DIAB50 Product Page
    Minimum order quantity: 50
    Order in multiples of: 50
    Add To CartLoading Done
  • Simpson Strong-Tie SSP SSP 18-Gauge Galvanized Single Stud Plate

    Standard Shipping

    $1.22

    Features:

    • Can be used to make a connection to either the top or bottom plate
    • Embossment in the angle reinforces the plate
    • Sill plate installation: fill all round holes
    • Width: 1-3/8 in.
    • Height: 6-11/16 in.
    Simpson Strong-tie SSP Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie ET-HP22-N ET-HP 22-oz. Epoxy Adhesive Cartridge with Nozzle

    Standard Shipping

    $39.72

    Features:

    • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    • Cure times: 24 hours at 70 degreeF, 72 hours at 50 degreeF
    • Easy hole-cleaning ? no power-brushing required
    • Suitable for use in dry or water-saturated concrete
    • When properly mixed, adhesive will be a uniform gray color

     

    Simpson Strong-tie ET-HP22-N Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie HTS24 HTS 24 in. 14-Gauge Galvanized Heavy Twist Strap

    Standard Shipping

    $3.81

    Features:

    • Available with the bend reversed
    • Straps do not need to be wrapped over the truss to achieve the allowable load
    • Versatile with many lengths offered to fit the specific application
    • Length: 24 in.
    • Made from 14-gauge steel
    Simpson Strong-tie HTS24 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LB26 LB Galvanized Top-Flange Joist Hanger for 2×6

    Standard Shipping

    $6.09

    Features:

    • Designed to help resist download forces
    • The unique two-level embossment provides added stiffness to the top flange
    • Quick installation
    • Nominal joist size: 2×6
    • Made from 14-gauge steel
    Simpson Strong-tie LB26 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie CB66 CB Galvanized Column Base for 6×6

    Standard Shipping

    $46.31

    Features:

    • Increased uplift resistance for wind or seismic loading
    • Bolt hole locations meet code-required spacing for optimal capacity
    • Nominal column size: 6×6
    • Made from 7-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Simpson Strong-tie CB66 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie MPB88Z MPBZ ZMAX Galvanized Moment Post Base for 8×8 w/ SDS Screws

    Free Shipping

    $243.85

    Features:

    • Tabs inside the MPBZ provide the code-required 1 in. post standoff to help prevent rot from standing water and ground moisture
    • Stamped indicators and internal tabs identify the required concrete embedment depth
    • Strategically placed holes simplify installation to allow template attachment
    • Optional obround holes have been added for attaching trim material
    • Additional holes at the embedment line allow standing water to exit and a point of visual inspection
    Simpson Strong-tie MPB88Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor

    Standard Shipping

    $5.53

    Features:

    • Chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
    • Tested per ACI355.2 and AC193
    Simpson Strong-tie STB2-75812 Product Page
    Add To CartLoading Done
  • STHD10

    Simpson Strong-Tie STHD10 STHD 24-5/8 in. 12-Gauge Galvanized Strap-Tie Holdown

    Standard Shipping

    $20.79

    Features:

    • The nailing pattern allows for nailing to the edges of double 2x’s
    • Strap nail slots are countersunk to provide a lower nail head profile
    • The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
    • Standard strap length: 24-5/8 in.
    • Made from 12-gauge steel
    Simpson Strong-tie STHD10 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie TSP TSP 16-Gauge Galvanized Stud-Plate Tie

    Standard Shipping

    $1.66

    Features:

    • Embossment feature provides strength at the bend
    • Features optional diamond holes of various uplift capacities with min./max. nailing configurations
    • Can be installed before or after placement of wall
    • Width: 1-1/2 in.
    • Length: 7-7/8 in.
    Simpson Strong-tie TSP Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie CBSQ66-SDS2 CBSQ Galvanized Standoff Column Base for 6×6 with SDS Screws

    Standard Shipping

    $64.55

    Features:

    • Uses Strong-Drive screws, which allow for fast installation, reduced reveal and high capacity
    • Provides a 1-in. standoff between post and concrete that meets code requirements
    • Embeds in wet concrete at time of pour
    • The standoff base reduces the potential for decay at post and column ends
    • Shipped with base plate assembled
    Simpson Strong-tie CBSQ66-SDS2 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie HHUS48 HHUS Galvanized Face-Mount Joist Hanger for 4×8

    Standard Shipping

    $7.69

    Features:

    • Features double-shear nailing which distributes the load through two points on each joist nail for greater strength
    • Allows for the use of fewer nails, faster installation, and the use of standard nails for all connections
    • Do not bend or remove tabs
    • Nominal joist size: 4×8
    • Made from 14-gauge steel
    Simpson Strong-tie HHUS48 Product Page
    Add To CartLoading Done
  • EMN22I-RP5 dispenser nozzle

    Simpson Strong-Tie EMN22I-RP5 EMN22i Epoxy Mixing Nozzle 5-Qty

    Standard Shipping

    $26.60

    Features:

    • An 18-element mixing nozzle for use with 22 oz. and 56 oz. epoxy adhesive cartridges
    • This is a one-piece nozzle with integrated nut (separate retaining nut not required)
    • Once the epoxy hardens in the nozzle it can be used as a cap to keep the product fresh
    • Each nozzle is 14 in. long for use in all depths of holes
    • Quantity: 5
    Add To CartLoading Done
  • Simpson Strong-Tie SDS25412MB Strong-Drive SDS HEAVY-DUTY CONNECTOR Screw 1/4 in. x 4-1/2 in. DB Coating 100-Qty

    Standard Shipping

    $84.56

    Features:

    • Type-17 point enables easy driving with no predrilling and minimal wood splitting
    • 3/8-in. hex head with 0.48-in. integrated washer
    • Head is stamped with the Simpson Strong-Tie — sign and fastener length for easy identification after installation
    • Serrated threads
    • Replacement driver bit model BITHEXR38-134 (not included)

     

    Simpson Strong-tie SDS25412MB Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie SET3G22-N 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension

    Standard Shipping

    $52.79

    Features:

    • Exceptional performance superior bond-strength values at long-term elevated temperature of 110 degreeF (43 degreeC) using optimized drill bit diameters
    • Tested and assessed in accordance with ICC-ES AC308 and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete
    • Design flexibility can be specified for dry or water-saturated conditions when temperatures range from -40 degreeF (-40 degreeC) to 176 degreeF (80 degreeC)
    • Jobsite versatility can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40 degreeF (4 degreeC) and 100 degreeF (38 degreeC)
    • Maximized production and safety qualified for installation using the Speed Clean? DXS dust extraction drilling system as an alternative to the conventional blow-brush-blow hole-cleaning method

     

    Simpson Strong-tie SET3G22-N Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie WSV134S Strong-Drive WSV SUBFLOOR Screw Collated 9 x 1-3/4 in. T-25 Yellow-Zinc 2000-Qty

    Standard Shipping

    $132.72

    Features:

    • Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
    • Less installation torque also means less wear on tools
    • Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
    • The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
    • WSV screws can be easily backed out, allowing for future access to floor cavities
    Simpson Strong-tie WSV134S Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie BC46Z BC ZMAX Galvanized Post Cap for 4×6

    Standard Shipping

    $13.95

    Features:

    • Provides a positive connection for a post to a wood deck
    • Stronger than angled nailing or screw fastening
    • Reduces the chance of the post splitting and eliminates nailing into end grain
    • Not recommended for non top-supported installations (such as fences or unbraced carports)
    • Nominal post size: 4×6
    Simpson Strong-tie BC46Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie HRS12 HRS 12 in. 12-Gauge Galvanized Heavy Strap Tie

    Standard Shipping

    $4.20

    Features:

    • A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
    • Straight lines and chamfered edges offer a better appearance
    • Provides support in home repair and construction projects
    • Easy nailing pattern for connecting the sides of 2x members
    • Width: 1-3/8 in.
    Simpson Strong-tie HRS12 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie EDT22S Steel Dispensing Tool for 22 oz. Adhesive Cartridges

    Standard Shipping

    $75.99

    Features:

    • Manual dispensing tool
    • Features a steel carriage and is engineered for high-volume, continuous use
    • The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridge
    • For 22 oz. adhesive cartridges

     

    Simpson Strong-tie EDT22S Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie SUL26Z SUL ZMAX Galvanized Joist Hanger for 2×6 Skewed Left

    Standard Shipping

    $13.41

    Features:

    • SUL = skewed left
    • Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
    • These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
    • Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
    • Nominal joist size: 2×6 or 2×8
    Simpson Strong-tie SUL26Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie SSDWP3S305 Deck-Drive DWP WOOD SS Screw Collated 10 x 3 in. T25 6-Lobe Type 305 1000-Qty

    Free Shipping

    $308.77

    Features:

    • Flat head
    • Unique box thread design with raised-ridge technology greatly reduces driving torque
    • Specially designed sharp point penetrates hard wood products with ease
    • 6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
    • Length: 3 in.

     

    Simpson Strong-tie SSDWP3S305 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie MASB MASB 16-Gauge Galvanized Masonry Mudsill Anchor

    Standard Shipping

    $2.39

    Features:

    • Anchors mudsill to concrete block, poured walls or slab foundations
    • Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position
    • Attach mudsill to anchor only after the concrete grout cures
    • Nominal sill size: 2×4, 2×6
    • Made from 16-gauge steel

     

    Simpson Strong-tie MASB Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie HTT5 HTT 16 in. 11-Gauge Galvanized Heavy Tension Tie

    Standard Shipping

    $32.01

    Features:

    • Ideal for retrofit or new construction projects
    • Can be installed with cast-in-place or post-installed anchor bolts
    • Four-ply formed steel provides increased tension capacity
    • Anchor bolt washers not required
    • 2-1/2 in. width x 16 in. length
    Simpson Strong-tie HTT5 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LUS28Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×8

    Standard Shipping

    $1.89

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: 2×8 and 2×10
    Simpson Strong-tie LUS28Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie PDPAWL-250 .157 in. x 2-1/2 in. Powder-Actuated Pin w/ 1 in. Washer

    Standard Shipping

    $17.17

    Features:

    • The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
    • Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
    • Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
    • .300-in. head diameter / .157-in. shank diameter
    • 1-in. washer
    Simpson Strong-tie PDPAWL-250 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LUC210Z LUC ZMAX Galvanized Face-Mount Concealed-Flange Joist Hanger for 2×10

    Standard Shipping

    $3.03

    Features:

    • LUC-series hangers are tested, load rated and code compliant
    • The LUC series installs using several fastener selections with tested allowable loads
    • Suitable for nominal 2×10 and 2×12 lumber
    • Made from 18-gauge steel
    • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
    Simpson Strong-tie LUC210Z Product Page
    Add To CartLoading Done
  • Simpson WSV212S subfloor collated interior wood screw yellow zinc coatedSimpson WSV212S

    Simpson Strong-Tie WSV212S Strong-Drive WSV SUBFLOOR Screw Collated 9 x 2-1/2 in. T25 Yellow-Zinc 1500-Qty

    Free Shipping

    $189.99

    Features:

    • Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
    • Less installation torque also means less wear on tools
    • Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
    • The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
    • WSV screws can be easily backed out, allowing for future access to floor cavities
    Simpson Strong-tie WSV212S Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie WA62600MG Wedge-All 5/8 in. x 6 in. Mechanically Galvanized Expansion Anchor

    Standard Shipping

    $4.09

    Features:

    • One-piece, wrap-around clip ensures uniform holding capacity
    • Threaded end is chamfered for ease of starting nut
    • Diameter: 5/8 in.
    • Length: 6 in.
    • Made from mechanically galvanized carbon steel
    Simpson Strong-tie WA62600MG Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie HDQ8-SDS3 HDQ 14-in. Galvanized Holdown w/ Strong-Drive SDS Screws

    Standard Shipping

    $77.26

    Features:

    • SDS screws are supplied with the holdowns to ensure proper fasteners are used
    • No stud bolts to countersink at openings
    • Height: 14 in.
    • Made from 7-gauge steel
    • Galvanized (G90) for extra corrosion resistance
    Simpson Strong-tie HDQ8-SDS3 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie H1Z H1 18-Gauge ZMAX Galvanized Hurricane Tie

    Standard Shipping

    $1.99

    Features:

    • Holds the rafter or truss on both sides for high lateral load resistance
    • Used for a variety of connections where one member crosses another
    • Can be installed on inside or outside of wall, or both sides
    • Can be installed with flanges facing either inward or outward
    • Made from 18-gauge steel
    Simpson Strong-tie H1Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie HETA16 HETA 16 in. Galvanized Heavy Embedded Truss Anchor

    Standard Shipping

    $2.29

    Features:

    • An indented embedment line ensures accurate embedment depth
    • Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
    • Load rated for wind and seismic forces
    • 12-in. exposed length
    • Embed 4 in. into a poured concrete bond beam or grouted block wall
    Simpson Strong-tie HETA16 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LGT2 LGT 2-Ply Girder Tiedown

    Standard Shipping

    $13.49

    Features:

    • Suitable for retrofit applications
    • The embossments add stiffness in crucial areas for improved performance
    • Simple to install and can be installed on the inside or outside of the wall
    • Load rated to resist high-wind forces
    • 2-ply
    Simpson Strong-tie LGT2 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie ABU66Z ABU ZMAX Galvanized Adjustable Standoff Post Base for 6×6

    Standard Shipping

    $53.96

    Features:

    • Attaches a post to existing concrete for decks, patio covers and other top-supported structures
    • Features 1-in. standoff to help prevent rot at post end
    • Slotted for adjustability
    • Designed for versatility, cost-effectiveness and maximum uplift performance
    • Nominal post size: 6×6
    Simpson Strong-tie ABU66Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LUS210Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×10

    Standard Shipping

    $2.41

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: 2×10, 2×12, 2×14
    Simpson Strong-tie LUS210Z Product Page
    Add To CartLoading Done