Price

Category

Product Type

Applications

Gauge

Brand

Showing all 33 results

  • Simpson Strong-Tie LU28 LU Galvanized Face-Mount Joist Hanger for 2×8

    Standard Shipping

    $0.94

    Features:

    • LU-series hangers are tested, load rated and code compliant
    • The LU series installs using several fastener selections with tested allowable loads
    • Precision-formed engineered for installation ease and design value
    • Seat width: 1-9/16 in.
    • Nominal joist size: 2×8, 2×10
    Simpson Strong-tie LU28 Product Page
    Add To CartLoading Done
  • APLH26

    Simpson Strong-Tie APLH26 Concealed-Flange Light Joist Hanger

    Standard Shipping

    $3.35

    APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw.

    Add To CartLoading Done
  • LUS24Z JOIST HANGER

    Simpson Strong-Tie LUS24Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×4

    Standard Shipping

    $1.08

    Features

    • Cannot be modified
    • Works for a wide range of applications
    • Features speed prongs used to temporarily position and secure the connector for easier and faster installation
    • LUS-series hangers are tested, load rated and code compliant
    Add To CartLoading Done
  • LRU26Z

    [25 Pack] Simpson Strong-Tie LRU26Z LRUZ ZMAX Galvanized Slopeable Light Rafter U Hanger for 2×6

    Standard Shipping

    $5.19

    Features

    • The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
    • May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
    • May be sloped up from 0° to 45°.
    • For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam (see “Max. C1” dimension in Standard Installation table).
    • Can be installed using nails or Strong-Drive SD Connector screws.
    Add To CartLoading Done
  • APHH46R

    Simpson Strong-Tie APHH46R Concealed-Flange Heavy Joist Hanger

    Standard Shipping

    $24.95

    APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…

    Add To CartLoading Done
  • Simpson Strong-Tie APLH210R Outdoor Accents ZMAX, Black Light Joist Hanger for 2×10 Rough

    Standard Shipping

    $5.48

    Features

    • 14 gauge
    • ZMAX galvanized with black powder coat
    Add To CartLoading Done
  • Simpson Strong-Tie LB26 LB Galvanized Top-Flange Joist Hanger for 2×6

    Standard Shipping

    $6.09

    Features:

    • Designed to help resist download forces
    • The unique two-level embossment provides added stiffness to the top flange
    • Quick installation
    • Nominal joist size: 2×6
    • Made from 14-gauge steel
    Simpson Strong-tie LB26 Product Page
    Add To CartLoading Done
  • APLH26R

    Simpson Strong-Tie APLH26R Outdoor Accents ZMAX, Black Light Joist Hanger for 2×6 Rough

    Standard Shipping

    $4.42

    APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw

    Add To CartLoading Done
  • APHH610R

    Simpson Strong-Tie APHH610R Concealed-Flange Heavy Joist Hanger

    Standard Shipping

    $40.62

    APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…

    Add To CartLoading Done
  • APHH610

    Simpson Strong-Tie APHH610 Concealed-Flange Heavy Joist Hanger

    Standard Shipping

    $42.18

    APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…

    Add To CartLoading Done
  • APHH46

    Simpson Strong-Tie APHH46 Outdoor Accents ZMAX, Black Heavy Joist Hanger for 4×6

    Standard Shipping

    $25.28

    Features

    • Use all specified fasteners; see General Notes
    • Use the Outdoor Accents structural wood screw (SDWS22312DBB) and hex-head washer (STN22) to connect to the joist
    • Use the Strong-Drive SDS Heavy-Duty Connector screw (SDS25300) to connect to the header
    • Fasteners sold separately
    Add To CartLoading Done
  • Simpson Strong-Tie HHUS48 HHUS Galvanized Face-Mount Joist Hanger for 4×8

    Standard Shipping

    $7.69

    Features:

    • Features double-shear nailing which distributes the load through two points on each joist nail for greater strength
    • Allows for the use of fewer nails, faster installation, and the use of standard nails for all connections
    • Do not bend or remove tabs
    • Nominal joist size: 4×8
    • Made from 14-gauge steel
    Simpson Strong-tie HHUS48 Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie HUC210-2Z HUC ZMAX Galvanized Face-Mount Concealed-Flange Joist Hanger for Double 2×10

    Standard Shipping

    $29.10

    Features:

    • Extra optional triangle holes for additional load
    • HUC-series hangers are tested, load rated and code compliant
    • Install wood joists to wood, masonry and concrete
    • Seat width: 3-1/8 in.
    • Nominal joist Size: Double 2×10
    Simpson Strong-tie HUC210-2Z Product Page
    Add To CartLoading Done
  • APVDW56

    Simpson Strong-Tie APVDW56 Decorative Washer

    Standard Shipping

    $2.57

    Features

    • ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
    • Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
    Add To CartLoading Done
  • APLH24R

    Simpson Strong-Tie APLH24R Concealed-Flange Light Joist Hanger

    Standard Shipping

    $3.68

    APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw.

    Add To CartLoading Done
  • APLH26

    Simpson Strong-Tie APLH210 Concealed-Flange Light Joist Hanger

    Standard Shipping

    $5.26

    APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw.

    Add To CartLoading Done
  • APDPC4

    Simpson Strong-Tie APDPC6 Post Cap

    Standard Shipping

    $3.18

    Features

    • Designed to fit a nominal 4×4 or 6×6 wood post
    • Decorative, square design
    • Provides moisture protection
    Add To CartLoading Done
  • ALPH24

    Simpson Strong-Tie APLH24 Outdoor Accents ZMAX, Black Light Joist Hanger for 2×4

    Standard Shipping

    $3.79

    Features

    • 14 gauge
    • ZMAX galvanized with black powder coat
    Add To CartLoading Done
  • ALPH24[100PCK]

    [Pack of 12] Simpson Strong-Tie APLH24[12PCK] Outdoor Accents ZMAX, Black Light Joist Hanger for 2×4

    Standard Shipping

    $46.89

    Features

    • 14 gauge
    • ZMAX galvanized with black powder coat
    Add To CartLoading Done
  • LUS26Z

    Simpson Strong-Tie LUS26Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×6

    Standard Shipping

    $1.45

    Features

    • Cannot be modified
    • Works for a wide range of applications
    • Features speed prongs used to temporarily position and secure the connector for easier and faster installation
    • LUS-series hangers are tested, load rated and code compliant
    Add To CartLoading Done
  • LUS26Z

    Simpson Strong-Tie LUS26 LUS Galvanized Face-Mount Joist Hanger for 2×6

    Standard Shipping

    $1.19

    Features

    • Cannot be modified
    • Works for a wide range of applications
    • Features speed prongs used to temporarily position and secure the connector for easier and faster installation
    • LUS-series hangers are tested, load rated and code compliant
    Add To CartLoading Done
  • Simpson Strong-Tie SUL26Z SUL ZMAX Galvanized Joist Hanger for 2×6 Skewed Left

    Standard Shipping

    $13.41

    Features:

    • SUL = skewed left
    • Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
    • These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
    • Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
    • Nominal joist size: 2×6 or 2×8
    Simpson Strong-tie SUL26Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LUS28Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×8

    Standard Shipping

    $1.89

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: 2×8 and 2×10
    Simpson Strong-tie LUS28Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LUC210Z LUC ZMAX Galvanized Face-Mount Concealed-Flange Joist Hanger for 2×10

    Standard Shipping

    $3.03

    Features:

    • LUC-series hangers are tested, load rated and code compliant
    • The LUC series installs using several fastener selections with tested allowable loads
    • Suitable for nominal 2×10 and 2×12 lumber
    • Made from 18-gauge steel
    • ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
    Simpson Strong-tie LUC210Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LUS210Z LUS ZMAX Galvanized Face-Mount Joist Hanger for 2×10

    Standard Shipping

    $2.41

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: 2×10, 2×12, 2×14
    Simpson Strong-tie LUS210Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LUS210-2Z LUS ZMAX Galvanized Face-Mount Joist Hanger for Double 2×10

    Standard Shipping

    $4.42

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: Double 2×10 and Double 2×12
    Simpson Strong-tie LUS210-2Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LUS28-3Z LUS ZMAX Galvanized Face-Mount Joist Hanger for Triple 2×8

    Standard Shipping

    $8.12

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: Triple 2×8 and Triple 2×10
    Simpson Strong-tie LUS28-3Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie HUC210-3Z HUC ZMAX Galvanized Face-Mount Concealed-Flange Joist Hanger for Triple 2×10

    Standard Shipping

    $53.96

    Features:

    • Extra optional triangle holes for additional load
    • HUC-series hangers are tested, load rated and code compliant
    • Install wood joists to wood, masonry and concrete
    • Seat width: 4-11/16 in.
    • Nominal joist size: Triple 2×10
    Simpson Strong-tie HUC210-3Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie SUL210Z SUL ZMAX Galvanized Joist Hanger for 2×10 Skewed Left

    Standard Shipping

    $20.24

    Features:

    • SUL = skewed left
    • Can accommodate joists skewed 40 to 50 degrees
    • Angled nail slots direct nails for proper installation
    • Nominal joist size: 2×10 or 2×12
    • Made from 16-gauge steel
    Simpson Strong-tie SUL210Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie SUR210Z SUR ZMAX Galvanized Joist Hanger for 2×10 Skewed Right

    Standard Shipping

    $20.24

    Features:

    • SUR = skewed right
    • Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
    • These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
    • Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
    • Nominal joist size: 2×10 or 2×12
    Simpson Strong-tie SUR210Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LB210AZ LBAZ ZMAX Galvanized Light-Bent Top-Flange Joist Hanger for 2×10

    Standard Shipping

    $8.29

    Features:

    • Designed to help resist download forces
    • The unique two-level embossment provides added stiffness to the top flange
    • Quick installation
    • Seat width: 1-9/16 in.
    • Height: 9-3/16 in.
    Simpson Strong-tie LB210AZ Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie SUR26Z SUR ZMAX Galvanized Joist Hanger for 2×6 Skewed Right

    Standard Shipping

    $13.41

    Features:

    • SUR = skewed right
    • Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
    • These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
    • Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
    • Nominal joist size: 2×6 or 2×8
    Simpson Strong-tie SUR26Z Product Page
    Add To CartLoading Done
  • Simpson Strong-Tie LUS28-2Z LUS ZMAX Galvanized Face-Mount Joist Hanger for Double 2×8

    Standard Shipping

    $4.05

    Features:

    • Patented double-shear nailing design provides greater strength with fewer nails
    • Speed prongs for fast and easy installation
    • Angled joist nailing easier in tight spaces
    • Do not bend or remove tabs
    • Nominal joist size: Double 2×8 and Double 2×10
    Simpson Strong-tie LUS28-2Z Product Page
    Add To CartLoading Done