Price

Category

Product Type

Applications

Brand

Length (in)

Diameter (in)

Showing 1–40 of 142 results

  • DIAB50 Simpson drop-in anchor

    Simpson Strong-Tie DIAB50 DIAB Drop-In Internally Threaded Anchor for 1/2-in. Rod

    Standard Shipping

    $0.43

    Features:

    • Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
    • Positive-set marking system indicates when anchor is properly set
    • Zinc-plated carbon steel
    • Length: 2 in.
    • Drill bit diameter: 5/8 in.
    Simpson Strong-tie DIAB50 Product Page
    Minimum order quantity: 50
    Order in multiples of: 50
    Add To CartLoading Done
  • Simpson Strong-Tie STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor

    Standard Shipping

    $5.53

    Features:

    • Chamfered top designed to prevent mushrooming during installation
    • Qualified for static and seismic loading conditions (seismic design categories A through F)
    • Suitable for horizontal, vertical and overhead applications
    • Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
    • Tested per ACI355.2 and AC193
    Simpson Strong-tie STB2-75812 Product Page
    Add To CartLoading Done
  • [10 Pack] Simpson Strong-Tie THDB62100WH Titen HD 5/8 in. x 10 in. Washer-Head Heavy-Duty Screw Anchor

    Standard Shipping

    $87.26

    Features

    • Tested in accordance with ACI 355.2 and AC193
    • Qualified for static, wind and seismic loading conditions
    • Available in 1/2″ and 5/8″ diameters
    • Standard fractional sizes — the hole size matches the anchor size
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartLoading Done
  • THD37500H

    [50 Pack] Simpson Strong-Tie THD37500H Titen HD 3/8 in. x 5 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $95.38

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • Simpson Strong-Tie THD50600HMGF1 Titen HD 1/2 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $4.95

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • PFM1411800

    DeWalt PFM1411380 1/2″ x 3″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    Standard Shipping

    $39.46

    Features

    • PFM1411380 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartLoading Done
  • PFM1411800

    DeWalt PFM1411100 1/4″ x 3″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    Standard Shipping

    $27.75

    Features

    • PFM1411100 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartLoading Done
  • PFM1411800

    DeWalt PFM1411060 1/4″ x 2-1/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    Standard Shipping

    $28.95

    Features

    • PFM1411060 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartLoading Done
  • PFM1411800

    DeWalt PFM1411020 1/4″ x 1-3/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc

    Standard Shipping

    $29.95

    Features

    • PFM1411020 is designed for standard ANSI tolerance drill bits
    • Patented thread design offers low installation torque
    • Tough threads for tapping high strength concrete
    • Ratchet teeth on underside of hex washer head lock against the fixture
    • Can be installed closer to the edge than traditional expansion anchors
    Add To CartLoading Done
  • [50 Pack] Simpson Strong-Tie THD37600H Titen HD 3/8 in. x 6 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $106.92

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [5 Pack] Simpson Strong-Tie THD75500H4SS Titen HD 3/4 in. x 5 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    Standard Shipping

    $80.00

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • THD37300CS6SS

    [20 Pack] Simpson Strong-Tie THD50612H4SS Titen HD 1/2 in. x 6-1/2 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    Standard Shipping

    $195.69

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • [30 Pack] Simpson Strong-Tie THD37500HC30 Titen HD 3/8 in. x 5 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $68.78

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [100 Pack] Simpson Strong-Tie THDB25178H Titen HD 1/4 in. x 1-7/8 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $68.00

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • THD37300CS6SS

    [5 Pack] Simpson Strong-Tie THD75812H6SS Titen HD 3/4 in. x 8-1/2 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor

    Standard Shipping

    $138.54

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • [20 Pack] Simpson Strong-Tie THD50400H6SS Titen HD 1/2 in. x 4 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    Standard Shipping

    $182.46

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • [20 Pack] Simpson Strong-Tie THD50612H Titen HD 1/2 in. x 6-1/2 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $50.40

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [15 Pack] Simpson Strong-Tie THD50800WH Titen HD 1/2 in. x 8 in. Washer-Head Heavy-Duty Screw Anchor

    Standard Shipping

    $87.26

    Features

    • Tested in accordance with ACI 355.2 and AC193
    • Qualified for static, wind and seismic loading conditions
    • Available in 1/2″ and 5/8″ diameters
    • Standard fractional sizes — the hole size matches the anchor size
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartLoading Done
  • THD37300CS6SS

    [10 Pack] Simpson Strong-Tie THDB62500H4SS Titen HD 5/8 in. x 5 in. Type 304 Stainless-Steel Heavy-Duty Screw Anchor

    Standard Shipping

    $106.62

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • [5 Pack] Simpson Strong-Tie THD75500HMG Titen HD 3/4 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $47.92

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [5 Pack] Simpson Strong-Tie THD75812H Titen HD 3/4 in. x 8-1/2 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $43.19

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • THD37300CS6SS

    [10 Pack] Simpson Strong-Tie THDB62600H4SS Titen HD 5/8 in. x 6 in. Type 304 Stainless-Steel Heavy-Duty Screw Anchor

    Standard Shipping

    $120.00

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • [25 Pack] Simpson Strong-Tie THD37400CS6SS Titen HD 3/8 in. x 4 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor

    Standard Shipping

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Standard fractional sizes, hole size same as anchor size
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    • Available in 1/4″ and 3/8″ diameters
    Request QuoteLoading Done
  • [25 Pack] Simpson Strong-Tie THDC25300CS6SS Titen HD 1/4 in. x 3 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor

    Standard Shipping

    $115.52

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Standard fractional sizes, hole size same as anchor size
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    • Available in 1/4″ and 3/8″ diameters
    Add To CartLoading Done
  • [5 Pack] Simpson Strong-Tie THD501400H Titen HD 1/2 in. x 14 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $63.69

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • THD37300CS6SS

    [20 Pack] Simpson Strong-Tie THD50400H4SS Titen HD 1/2 in. x 4 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    Standard Shipping

    $140.62

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • THD37300CS6SS

    [5 Pack] Simpson Strong-Tie THD75700H6SS Titen HD 3/4 in. x 7 in. Type 316 Stainless Steel Heavy-Duty Screw Anchor

    Standard Shipping

    $128.54

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • [10 Pack] Simpson Strong-Tie THDB62800H4SS Titen HD 5/8 in. x 8 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    Standard Shipping

    $151.23

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • [10 Pack] Simpson Strong-Tie THDB62600WH Titen HD 5/8 in. x 6 in. Washer-Head Heavy-Duty Screw Anchor

    Standard Shipping

    $49.43

    Features

    • Tested in accordance with ACI 355.2 and AC193
    • Qualified for static, wind and seismic loading conditions
    • Available in 1/2″ and 5/8″ diameters
    • Standard fractional sizes — the hole size matches the anchor size
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • Washer head allows screw anchor applications incompatible with a hex head
    Add To CartLoading Done
  • [5 Pack] Simpson Strong-Tie THDT75600H Titen HD 3/4 in. x 6 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $27.69

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [20 Pack] Simpson Strong-Tie THD50500HMG Titen HD 1/2 in. x 5 in. Mechanically Galvanized Heavy-Duty Screw Anchor

    Standard Shipping

    $92.62

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [20 Pack] Simpson Strong-Tie THDB25312HC20 Titen HD 1/4 in. x 3-1/2 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $17.52

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [50 Pack] Simpson Strong-Tie THDB25412CS Titen HD 1/4 in. x 4-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    Standard Shipping

    $56.28

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Standard fractional sizes, hole size same as anchor size
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    • Available in 1/4″ and 3/8″ diameters
    Add To CartLoading Done
  • [10 Pack] Simpson Strong-Tie THDB62800H Titen HD 5/8 in. x 8 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $63.19

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [20 Pack] Simpson Strong-Tie THD50400H Titen HD 1/2 in. x 4 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $36.78

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • [30 Pack] Simpson Strong-Tie THD37300HC30 Titen HD 3/8 in. x 3 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $46.52

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartLoading Done
  • THD37300CS6SS

    [50 Pack] Simpson Strong-Tie THDC25200H6SS Titen HD 1/4 in. x 2 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor

    Standard Shipping

    $179.09

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • THD37300CS6SS

    [25 Pack] Simpson Strong-Tie THD37300CS6SS Titen HD 3/8 in. x 3 in. Type 316 SS Countersunk Head Heavy-Duty Screw Anchor

    Standard Shipping

    $144.49

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • THD37300CS6SS

    [20 Pack] Simpson Strong-Tie THD50500H4SS Titen HD 1/2 in. x 5 in. Type 304 Stainless Steel Heavy-Duty Screw Anchor

    $160.00

    Features

    • THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
    • Ideal for exterior or corrosive environments
    • Less carbon steel, less expansion
    • Installs with an impact wrench or by hand tool
    • Tested in accordance with ACI355.2, AC193 and AC106
    Add To CartLoading Done
  • [50 Pack] Simpson Strong-Tie THD37212CS Titen HD 3/8 in. x 2-1/2 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    Standard Shipping

    $62.17

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Standard fractional sizes, hole size same as anchor size
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    • Available in 1/4″ and 3/8″ diameters
    Add To CartLoading Done