Showing all 15 results

  • 6-2IN-UBC

    Simpson Strong-Tie 4-6UBC Quick-Lock Unibar Centralizer

    Standard Shipping

    $271.59

    Features

    • Quick and easy installation
    • Made of durable noncorrosive plastic
    • Snaps over the rebar
    • Made in the USA with global materials
    Add To CartDone
  • 6-2IN-UBC

    Simpson Strong-Tie 4-8UBC Quick-Lock Unibar Centralizer

    Standard Shipping

    $271.59

    Features

    • Quick and easy installation
    • Made of durable noncorrosive plastic
    • Snaps over the rebar
    • Made in the USA with global materials
    Add To CartDone
  • 50100-PWR50100-PWR

    [Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer

    Standard Shipping

    $15.49

    [Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…

    Add To CartDone
  • 50100-PWR50100-PWR

    [Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer

    Standard Shipping

    $13.39

    [Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer Drive pins with a .300″ head by Powers Fasteners have a specially designed point that allows it to properly penetrate into typical base materials for the purpose of permanently fastening a fixture to concrete, concrete block and structural steel. A plastic flute…

    Add To CartDone
  • 50100-PWR

    [Pack of 100] DeWalt 50096-PWR .300 Head Drive Pin 2In w-7/8In Washer

    Standard Shipping

    $13.79

    [Pack of 100] DeWalt .300 Head Drive Pin 2In w-7/8In Washer 50096-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….

    Add To CartDone
  • 50034-PWR

    [Pack of 100] DeWalt 50034-PWR .300 Head Drive Pin 1 1/2 In

    Standard Shipping

    $6.79

    [Pack of 100] DeWalt .300 Head Drive Pin 1 1/2 In 50034-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….

    Add To CartDone
  • 50032-PWR50034-PWR

    [Pack of 100] DeWalt 50032-PWR Powers .300 Head Pin 1 1/4 In.

    Standard Shipping

    $12.75

    Features

    • Drive pins with a 0.300″ diameter head
    • Plastic flute is mounted on the pin shank
    • Fastening a fixture to concrete, concrete over steel deck, concrete masonry walls
    • The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
    Add To CartDone
  • 50026-PWR

    [Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In.

    Standard Shipping

    $11.50

    h3>[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In. Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to increase performance in…

    Add To CartDone
  • 50022-PWR

    [Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head

    Standard Shipping

    $12.50

    [Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to…

    Add To CartDone
  • 50012-PWR

    [Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head

    Standard Shipping

    $12.50

    [Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…

    Add To CartDone
  • 50630-PWR50630-PWR

    [Pack of 100] DeWalt 50630-PWR Load .27 Safety Strip Red

    Standard Shipping

    $12.17

    Features

    • High quality powder loads, designed for consistently and reliability
    • Specific load types are designed for each caliber powder actuated tool
    • They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
    • Manufactured by DEWALT
    Add To CartDone
  • FB24Z

    [100PCK] Simpson Strong-Tie FB24Z[100PCK] FB ZMAX Galvanized Fence Rail Bracket for 2×4

    Standard Shipping

    $41.19

    Features

    • Preinstallation of brackets allows rails to slide into place easily
    • Eliminates need for toe nails or screws
    Add To CartDone

  • [100 Pack] Simpson Strong-Tie THDB25178H Titen HD 1/4 in. x 1-7/8 in. Heavy-Duty Screw Anchor

    Standard Shipping

    $68.00

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Thread design undercuts to efficiently transfer the load to the base material
    • Standard fractional sizes
    • Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
    • Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
    • Reuse of the anchor will not achieve listed loads and is not recommended
    Add To CartDone
  • THD37212RHP1

    [100 Pack] Simpson Strong-Tie THDB25158RH Titen HD 1/4 in. x 1-5/8 in. Threaded Rod Hanger for 1/4-in. Rod

    Standard Shipping

    $121.85

    Features

    • Thread design undercuts to efficiently transfer the load to the base material
    • Serrated cutting teeth and thread design enable quick and easy installation
    • Specialized heat-treating process creates tip hardness to facilitate cutting while the anchor body remains ductile
    • Designed to install using a rotary hammer or hammer drill with standard ANSI drill bits — no special tools required
    • Installs with standard-sized sockets
    • Code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
    • FM listed
    Add To CartDone

  • [100 Pack] Simpson Strong-Tie THDB25178CS Titen HD 1/4 in. x 1-7/8 in. Zinc-Plated Countersunk Head Heavy-Duty Screw Anchor

    Standard Shipping

    $85.18

    Features

    • Tested in accordance with ACI 355.2, AC193 and AC106
    • Qualified for static, wind and seismic loading conditions
    • Standard fractional sizes, hole size same as anchor size
    • No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
    • Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
    • 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
    • Countersunk head allows screw anchor applications incompatible with a hex head
    • Available in 1/4″ and 3/8″ diameters
    Add To CartDone