Showing all 5 results

  • XP30

    Simpson Strong-Tie AT-XP30 30-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    Standard Shipping

    $38.59

    Features

    • Excellent for use in cold weather conditions or applications where fast cure is required.
    • superior sustained load performance at elevated temperature.
    • can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
    • Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
    • Easy hole-cleaning procedure — no power-brushing required.
    • Approved for installation with vacuum-drill bit system without further hole cleaning.
    Add To CartLoading Done
  • SET3G10

    Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension

    Standard Shipping

    $29.39

    Features

    • SET3G10 REPLACES SET-XP10
    • Sustained load performance at elevated temperature.
    • Can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
    • Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
    • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
      See Code Report (ESR-4057) and Engineering Letter for approved systems.
    Add To CartLoading Done
  • AT-XP13

    Simpson Strong-Tie AT-XP13 High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    Standard Shipping

    $40.37

    Features

    • Excellent for use in cold weather conditions or applications where fast cure is required.
    • superior sustained load performance at elevated temperature.
    • can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
    • Approved for installation with vacuum-drill bit system without further hole cleaning.
    • Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
    • Easy hole-cleaning procedure — no power-brushing required.
    Add To CartLoading Done
  • Epoxy Anchoring Adhesives

    Simpson Strong-Tie SET3G56 56-oz. High-Strength Epoxy Adhesive

    Standard Shipping

    $121.41

    Features

    • superior bond strengths permit ductile solutions in high seismic areas.
    • improved sustained load performance at elevated temperature.
    • can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
    • Recognized per ICC ES AC308
    • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
    • Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring.
    • With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas.
    • Low-odor formulation.
    • no performance difference between water-saturated concrete, water-filled holes, or submerged concrete.
    • For use with potable water.
    Add To CartLoading Done
  • Epoxy Anchoring Adhesives

    Simpson Strong-Tie SET-XP56 SET-XP 56-oz. High-Strength Epoxy Adhesive Cartridge

    Standard Shipping

    $111.29

    Features

    • permitted for sustained load performance at elevated temperature.
    • for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 150°F (65°C).
    • Recognized per AC308 to be used for rebar development and splice length design provisions of ACI 318.
    • Approved for installation with vacuum-drill bit system without further hole cleaning. See Code Report (ESR-2508) for approved system.
    • Easy hole-cleaning — no power-brushing required.
    • Manufactured in the USA using global materials.
    Add To CartLoading Done