-
SALEÂ 19% OFF
Standard Shipping
$212.34 Original price was: $212.34.$172.53Current price is: $172.53.
Features
- Makita GFD02Z-built brushless motor delivers 585 in.lbs. of Max Torque
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPT is engineered to provide increased dust and water resistance in harsh job site conditions
- 2 speed settings (0-550 & 0-2,200 RPM)
- Compact length at only 6-11/16″; ideal for working in tight spaces
-
Free Shipping
$429.99
Features
- Powerful 10 AMP motor delivers 4.6 ft.lbs. of impact energy to handle the most demanding applications
- 2-mode operation for “Hammering Only” or “Hammering with Rotation”
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Rubberized ergonomic soft grip provides more comfort
- “No hammering when idling” functions helps increase tool life
-
Standard Shipping
$15.49
[Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
Standard Shipping
$13.39
[Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer Drive pins with a .300″ head by Powers Fasteners have a specially designed point that allows it to properly penetrate into typical base materials for the purpose of permanently fastening a fixture to concrete, concrete block and structural steel. A plastic flute…
-
Standard Shipping
$13.79
[Pack of 100] DeWalt .300 Head Drive Pin 2In w-7/8In Washer 50096-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
Standard Shipping
$6.79
[Pack of 100] DeWalt .300 Head Drive Pin 1 1/2 In 50034-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
Standard Shipping
$12.75
Features
- Drive pins with a 0.300″ diameter head
- Plastic flute is mounted on the pin shank
- Fastening a fixture to concrete, concrete over steel deck, concrete masonry walls
- The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
-
Standard Shipping
$11.50
h3>[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In. Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to increase performance in…
-
Standard Shipping
$45.58
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$17.29
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$19.15
Features
- DFM12724B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$12.99
Features
- DFM12724 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$14.20
Features
- DFM12722B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$10.29
Features
- DFM12722 is available in several head styles
-
Standard Shipping
$22.80
Features
- DFM12726B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$14.99
Features
- DFM12726 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$19.95
Features
- DFM12728B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$18.99
Features
- DFM12728 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$14.49
Features
- DFM12720B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$10.99
Features
- DFM12720 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Free Shipping
$509.33
Features
- Makita GSH05M1 is up to 40% faster cutting speed
- Magnesium base for durability and less weight
- Up to 290 cuts per charge in 2X10 SPF lumber using one 4.0Ah battery
- Makita-built brushless motor delivers 5,200 RPM for faster cutting performance
- Large 2-1/4″ cutting capacity at 90° and 1-5/8″ at 45°
-
Standard Shipping
$5.50
Features
- Nitrile Coating
- Grip and Abrasion Resistance
- 13 Gauge Nylon/Polyester Shell Provides a Lightweight, Breathable Fit
- Elastic Cuff
- Comfortable Fit
