Showing 1–40 of 76 results
-
Standard Shipping
$20.38
Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 30% smoother cutting than segmented blades
- Carefully tensioned for less vibration and a superior user experience
- Strict quality control measures ensure superior performance
- Dry or wet cutting for added versatility
-
Standard Shipping
$14.20
Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 30% smoother cutting than segmented blades
- Carefully tensioned for less vibration and a superior user experience
- Made with high quality diamonds
- Dry or wet cutting for added versatility
-
Standard Shipping
$11.60
Features
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Dry or wet cutting for added versatility
- Carefully tensioned for less vibration and a superior user experience
- Made with high quality diamonds
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Strict quality control measures ensure superior performance
- For smoother and finer cuts in masonry products
-
Standard Shipping
$37.17
Features
- Taller 13mm segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- For cutting concrete, block, brick, pavers, and roof tiles
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting diamond blade
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
- For use with angle grinders or masonry saws
-
Standard Shipping
$22.00
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
Special Order Shipping
$1,327.06
Features
- 19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load
- The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
- The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 – #14 rebar dowel applications and dry coring up to 6 in.
-
Special Order Shipping
$882.33
Features
- 6.1 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH ® System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load.
- System reduces vibration felt by the user at the handles, compared to rotary hammers without thsis feature.
- The light weight design makes it ideally suited for horizontal drilling for #3 – #6 rebar dowel applications and dry coring up to 3 in.
-
Standard Shipping
$13.60
Features
- For use with angle grinders
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
- Dry or wet cutting for added versatility
- Up to 40% faster cutting than turbo blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- 50% taller (13mm) segments are designed for longer life and faster cutting
-
Free Shipping
$3,971.29
Features
- One-piece design
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- No tools required
-
Standard Shipping
$62.80
Features
- Pins for Concrete and Concrete Masonry (CMU)
- Gas Fasteners
- Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
- Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
-
Standard Shipping
$18.58
Features
- CFC free propellant
- Class B2 Flame retardant
- Physiologically harmless when fully cured
- Contains no urea formaldehyde or PCB’s
- Does not rot or deteriorate with age
-
Standard Shipping
$12.99
Features
- General purpose anchoring
- 02820-PWR installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
-
Standard Shipping
$10.99
Features
- General purpose anchoring
- 02814-PWR installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
-
Standard Shipping
$25.59
Features
- 05523-PWR offers a pre-expanded anchor design allowing for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
Standard Shipping
$3.16
Features
- One Size Fits Most
- Provides protection with concrete, self-leveling, mastic, grout and other materials.
- Resistant to most chemicals, paints and sealers
- Easy-to-spot on jobsite.
-
Standard Shipping
$25.50
Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
-
Free Shipping
$887.50
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power and performance required for heavy-load applications
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes using a fully charged 40V XGT® 4.0Ah battery*
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
-
Free Shipping
$956.25
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
- Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
-
Special Order Shipping
$902.06
Features
- FAST DRILLING IN CONCRETE with 4.5 J of impact energy
- System reduces vibration felt by the user at the handles comparted to rotary hammers without this feature
- System shuts down the tool in bind up situations
- when paired with DWH200D shroud and DCV585 dust extractor
- to quickly switch between drilling, hammer drilling, and chipping applications
-
Special Order Shipping
$1,220.81
Features
- RAPID DRILLING AND CHIPPING in hard concrete with 13.3 J of impact energy
- MAINTAIN SPEED UNDER HEAVY LOADS with constant speed electronics
- EFFICIENT PERFORMANCE AND RUNTIME with brushless motor and German-engineered mechanism
- PRO-GRADE VERSATILITY: Tackle horizontal and downward drilling for #6 – #9 rebar dowel applications, dry coring up to 5 in., chipping in any lower-to-mid wall, bushing, and ground rod driving
- REDUCED VIBRATION FOR COMFORTABLE GRIP with SHOCKS™ Active Vibration Control®
-
Free Shipping
$1,059.99
Features
- Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
- Maintain speed under heavy loads with constant speed electronics
- Efficient performance and runtime with brushless motor and German-engineered apparatus
- Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
- Reduced vibration for comfortable grip Active Vibration Control
-
Free Shipping
$811.25
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 77″ long
- Weighs only 10.6 lbs. with battery for reduced operator fatigue
-
Free Shipping
$596.25
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
- Compact and ergonomic design at only 77″ long
- Weighs only 10.6 lbs. with battery for reduced operator fatigue (battery not included)
-
Free Shipping
$702.50
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
- Compact and ergonomic design at only 99″ long
- Weighs only 17.2 lbs. with battery for reduced operator fatigue (battery not included)
-
Free Shipping
$1,043.75
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 99″ long
- Weighs only 17.2 lbs. with battery for reduced operator fatigue
-
Free Shipping
$698.75
Features
- Makita-built motor delivers 12,500 VPM to help increase strength of concrete
- Dual directional switch to conveniently hold the tool in either horizontal or vertical positions
- Compact and ergonomic design at only 105-1/2″ long
- Protective cover helps prevent battery contamination
- 18V LXT® Lithium-Ion 5.0 Ah battery BL1850B reaches a full charge in 45 minutes or less
-
Standard Shipping
$22.90
Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Carefully tensioned for less vibration and a superior user experience
- Dry or wet cutting for added versatility
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
-
Standard Shipping
$22.90
Features
- feat1
- 50% taller (13mm) segments are designed for longer life and faster cutting
- For cutting concrete, block, brick, and pavers
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 40% faster cutting than turbo blade
- Carefully tensioned for less vibration and a superior user experience
- For use with angle grinders
- Dry or wet cutting for added versatility
-
Standard Shipping
$75.76
Features
- Allows the use of SDS-PLUS bits in Spline shank rotary hammers
- Engineered to hold up to the most demanding of applications
- High quality steel construction for longer life
- For use in rotary hammers that accept Spline shank bits
-
Standard Shipping
$106.15
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
Standard Shipping
$92.33
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
Standard Shipping
$115.28
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
Standard Shipping
$74.48
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
Standard Shipping
$134.20
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
Standard Shipping
$70.33
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
Standard Shipping
$63.96
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
Standard Shipping
$120.27
Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
